• Analytical Science and Technology
• /
• v.29 no.5
• /
• pp.219-224
• /
• 2016

불산 중 극미량 음이온의 고상추출과 이온크로마토그래프를 이용한 고감도 분석법이 개발되었다. 불산 중 불소이온이 고상에 의해 제거하였고 이어서 음이온 (F⁻, CH₃COO⁻, Cl⁻, Br⁻, NO₃⁻, PO₄³⁻, SO₄²⁻)들이 이온크로마토그래프를 이용하여 연속적으로 분리하였다. 고상 추출법에 영향을 주는 각 인자들 (흡착제의 선택, 시료의 부피 및 pH, 용출 용액과 용출용액의 부피)을 결정하였으며 그 결과 흡착제로서 Oasis WAX 컬럼이 가장 우수하였고 1.0 mL의 시료부피, 용출용액으로 50 mM 초산암모늄염 5 mL가 분리능에서 가장 우수하였다. 개발한 방법에 의한 음이온 (Cl⁻, Br⁻, NO₃⁻, PO₄³⁻, SO₄²⁻)들의 방법검출한계는 25 % 불산용액 (w/w) 중에 0.04~0.30 µg/L의 범위를 보였고 정밀도는 20.0와 40.0 µg/L의 농도에서 5 % 이내를 보였다. 한 제조회사에 의한 25 % 불산 중 음이온의 4.2에서 47.5 µg/L의 범위로 모두 검출되었다. 이 방법은 시험절차가 간단하고, 재현성 및 감도가 좋아서 반도체회사에서 불산 중 음이온 불순물을 정도 관리하는데 매우 유용한 방법이 될 것으로 판단된다.

• Journal of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.491-497
• /
• 1987

$ThO_2-Tm_2O_3$ (TDT) solid solutions containing 1,3,5,8,10, and 15 mol% $Tm_2O_3$ were synthesized from spectroscopically pure $ThO_2$ and $Tm_2O_3$ polycrystalline powders. The TDT solid solutions were indentified to the fluorite structure by the X-ray powder technique. The values of the lattice parameter were decreased with increasing amount of $Tm_2O_3$ incorporated. But, there was no linearity for the samples containing 8, 10, and 15 mol% $Tm_2O_3$. It was concluded that these samples became incomplete solid solutions. From the intensity analyses of X-ray diffraction patterns, the residual factor was found below 0.13 even for the 15 mol% TDT system. lt was confirmed from the DTA and TGA analyses that any phase transitions did not occur under the experimental condition executed. Comparing the pycnometric density with the lattice parameter obtained from XRD, it was suggested that the predominant defect model be an oxygen vacancy.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.272-279
• /
• 1988

Kinetics of ascorbic acid destruction and browning were evaluated by the dynamic test using actual drying data in order to apply in the optimization of food dehydration. Radish was chosen as a test material because it has many typical quality characteristics during drying. Radish was dried in the cabinet dryer with being measured in moisture, food temperature, ascorbic acid and browning. Using moisture and temperature history, proposed kinetic model was integrated and parameters of the model were searched by the iteration scheme to show minimum discrepancy between predicted and experimental data. Ascorbic acid destruction and browning were represented by first and zero order reaction respectively. Arrhenius equation was used to describe temperature dependence. Several mathematical functions of moisture dependence were compared in the model simplicity and residual sum of square. Attained kinetic models were analyzed as functions of temperature and moisture. Rate of ascorbic acid destruction was low at high moisture content, increased with moisture decrease to show a maximum at the moisture of $9{\sim}12g/g$ dry solid, and then decreased up to full dryness. Browning rate increased with moisture decrease to show a sharp maximum at $4{\sim}6g/g$ dry solid and decreased with further moisture decrease.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.2
• /
• pp.190-205
• /
• 2015

In this paper, the impact damage behavior of USN-150B carbon/epoxy composite laminates subjected to high velocity impact was studied experimentally and numerically. Square composite laminates stacked with $[45/0/-45/90]_{ns}$ quasi-symmetric and $[0/90]_{ns}$ cross-ply stacking sequences and a conical shape projectile with steel core, copper skin and lead filler were considered. First high-velocity impact tests were conducted under various test conditions. Three tests were repeated under the same impact condition. Projectile velocity before and after penetration were measured by infrared ray sensors and magnetic sensors. High-speed camera shots and C-Scan images were also taken to measure the projectile velocities and to obtain the information on the damage shapes of the projectile and the laminate specimens. Next, the numerical simulation was performed using explicit finite element code LS-DYNA. Both the projectile and the composite laminate were modeled using three-dimensional solid elements. Residual velocity history of the impact projectile and the failure shape and extents of the laminates were predicted and systematically examined. The results of this study can provide the understanding on the penetration process of laminated composites during ballistic impact, as well as the damage amount and modes. These were thought to be utilized to predict the decrease of mechanical properties and also to help mitigate impact damage of composite structures.

• Journal of the Korean Ceramic Society
• /
• v.39 no.1
• /
• pp.33-37
• /
• 2002

The phosphorescence powder, $SrA1_2O_4:Eu^{2+}$, synthesized by a Polymerized Complex Method(PCM), has been compared with that by a Solid-State Reaction(SSR), and their luminescence characteristics have been studied. The PCM powders were synthesized at $900^{\circ}C$ and the SSR powders at $1200^{\circ}C$. The size of PCM powders was about $0.1{\mu}m$ and one tenth of that of the SSR powders, which was due to the lower synthesized temperature. On the other hand, residual carbon in the PCM powders decreased with an increase in the crystallinity of host lattice, which was responsible for the non-white color of the powders. Both powders showed the maximum luminescence peaks around 520nm in the wave length at room temperature. However, the peak position for the PCM powders was shifted to a slightly lower wavelength and the value of half-width of the peak was broad comparing to that of the SSR powders, and the peak intensity decreased significantly. Such a change in the luminescence characteristics was due to the large difference in size for two types of powders and partly the residual carbon in the PCM powders.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.4
• /
• pp.359-364
• /
• 2006

Reversed-phase high-performance liquid chromatography (HPLC) techniques were developed to quantify abamectin (ABM) in paprika (Capsicum annum). Separation was achieved on a $C_{18}$ ODS column with a mobile phase of acetonitrile/water (96/4, v/v) mixture in an isocratic elution at the flow tate of 1.2 mL/min for avermectins (AVMs). The retention times were 8.0 and 9.7mins for AVM $B_{lb}$ and AVM $B_{1a}$, respectively. Residual AVMs (sum of AVM $B_{1a}$, AVM $B_{1b}$ and 8,9-Z-AVM $B_{1a}$) in the vegetable were extracted with acetonitrile, and the silica solid-phase extraction cartridges were used to purify the extract. AVMs were derivatized using trifluoroacetic acid and 1-methylimidazole, and the derivatives were determined with a fluorescence detector (excitation at 365 nm and emission at 470 nm). High and consistent recoveries, ranging from 93% to 115%, were obtained for AVM $B_{1a}$ and 8, 9-Z-AVM $B_{1a}$ at fortified levels of $20{\mu}g/kg\;and\;200{\mu}g/kg$ for paprika. The limit of quantitation (LOQ) was $2{\mu}g/kg$. The residual levels of AVMs in paprika in a field experiment from one day to seven days after the last application decreased from 18.40 to $7.59{\mu}g/kg$. The half-life $(T_{1/2})$ of AVMs in paprika was 1.47 days.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.4
• /
• pp.147-152
• /
• 2000

For the probiotic feed production from residual food waste by using the yeast Kluyveromyces marxianus, aerobic liquid fermentation was attempted at $35^{\circ}C$. After grinding finely, optimal fermentation conditions of the substrate was investigated in shaking incubator. By controlling water content yeast growth was studied at each different solid content of 5, 10 and 15% respectively. The most active growth of the yeast was shown at 10%. For the stimulation of the cell growth, mixed culture with Aspersillus oryzae was conducted in a 2 litre-jar fermenter. As the results, the yeast growth rate was increased, but the maximum viable cell count amounted was slightly higher as $3.5{\times}10^9/ml$ than single culture.

• Microbiology and Biotechnology Letters
• /
• v.18 no.3
• /
• pp.260-267
• /
• 1990

The mechanism of enzymatic hydrolysis of raw corn starch by the purified glucoamylase and a - amylase in an agitated bead reaction system was studied by investigating the changes of sugar profiles produced by each enzyme, the granular structure of raw corn starch, the amount of enzyme adsorption on residual starch, and the amylose content in residual raw starch. The sugar profiles produced by the action of exo-type glucoamylase or endo-type $\alpha$ -amylase in an agitated bead system were not recognizably differed with those produced in reaction system without bead. Without enzyme the intergenic microcrystalline structure of starch granule was not changed by the simple mechanical impact of solid media, but it was cleaved. However, starch granule was fragment into large number of small particles by the synergistic action of enzyme and attrition-milling media, identified to be the major saccharification enhancing mechanism along with the increased amount of enzyme adsorption. The amylose content decreased more readily in an agitated bead reaction system, especially by $\alpha$ -amylase.

• Analytical Science and Technology
• /
• v.23 no.4
• /
• pp.395-404
• /
• 2010

A multi-residual method using gas chromatography coupled with mass spectrometry (GC/MS/ MS) was developed for the analysis of 105 pesticides. This method was tested on lemons, beans and other vegetables. The pretreatment of these pesticides was performed by liquid-liquid partition followed by cleanup with solid phase extraction cartridge (SPE Florisil), after acetonitrile extraction from matrices and sodium chloride (15 g) addition. The recovery ranged from 71.1% to 126.0% except for azinphosmethyl, famoxadone, fenamidone, flufenoxuron and triadimefon in lemons and from 72.5% to 124.5% in bean. In lemon, the limit of detection (LOD) and limit of quantification (LOQ) were 0.001~150 ng/ mL and 0.004~500 ng/mL, respectively.

• Analytical Science and Technology
• /
• v.23 no.2
• /
• pp.119-127
• /
• 2010

An effective method for the simultaneous analysis of ${\beta}$-lactams from surface water was established. After solid-phase extraction with HLB (Hydrophilic Lipohilic Balance) cartridge at pH 2, seven ${\beta}$-lactams (amoxicillin, ampicillin, penicillin G, cefaclor, cefadroxil, cefatrizine and cephradine) were determined using LC/ESI-MS/MS. In this newly established method, correlation coefficients ($r^2$) of calibration curves for seven ${\beta}$-lactams in blank surface water appeared to be 0.9911~0.9995 in the concentration range of 0.01~1.0 ng/mL. The limits of detection (LODs) and the limits of quantificaiton (LOQs) in spiked surface water were shown to be 0.0003~0.0234 ng/mL and 0.0046~0.0778 ng/mL, respectively. The developed method is believed to serve as a rapid and reliable method for the qualitative and quantitative analysis of residual ${\beta}$-lactam antibiotics from aquatic environment.