• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.533-536
• /
• 2009

The gasification technology is a very flexible and versatile technology to produce a wide variety products such as electricity, steam, hydrogen, Fisher-Tropsch(FT) diesels, Dimethyl Ether(DME), methanol and SNG(Synthetic Natural Gas) with near-zero pollutant emissions. Gasification converts coal and other low-grade feedstocks such as biomass, wastes, residual oil, petroleum coke, etc. to a very clean and usable syngas. Syngas is produced from gasifier including CO, $H_2$, $CO_2$, $N_2$, particulates and smaller quantities of $CH_4$, $NH_3$, $H_2S$, COS and etc. After removing pollutants, syngas can be variously used in energy and environment fields. The pilot-scale coal gasification system has been operated since 1994 at Ajou University in Suwon, Korea. The pilot-scale gasification facility consists of the coal gasifier, the hot gas filtering system, and the acid gas removal (AGR) system. The acid gas such as $H_2S$ and COS is removed in the AGR system before generating electricity by gas engine and producing chemicals like Di-methyl Ether(DME) in the catalytic reactor. The designed operation temperature and pressure of the $H_2S$ removal system are below $50^{\circ}C$ and 8 kg/$cm^2$. The iron chelate solution is used as an absorbent. $H_2S$ is removed below 0.1 ppm in the H2S removal system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.1
• /
• pp.78-89
• /
• 1994

To evaluate of quality of Yakju brewed with different types of fermenters(Nuruk) and brewed by a method described in Sallymkyungjae, blucoamylase and protease and protease activities of Nuruk were measured, and proximate composition , coloring degree, acetaldehyde , alcohol , , fusel oils , amino acid content , mineral content and sugar composition of Yakju samples were also determined. It was foung that the lower the pH, the lower the glucoamylase acitvity in Nuruk samples A to E . In A, B, D and H, protease activity washigher at ph 5.5 than at pH 5.0 . Yakju sampels 1 to 5 during fermentation , total acidity and amino acid content were high at the first step and were getting lower gradually at the second step. In Yakju samples 6 to 11 , ethanol content was high in 6b, 7b, 8a, 8b and 11b. At the second step, residual sugar content was getting higher gradually in 7 a, 11 a and 11b. The coloring degree of Yakju wasinfluenced by not only color of Nuruk but also Fe content in Yakju . Of the Yakju examined , only 9a and 9b contained acetaldehyde in trace amounts. Thanol content was the highest in 8a and 8b. Fusel oil content was high in 8a and 8b. In samples 6 to 9 , aspartic acid content was higher in treatment a than treatment a than treatment b, but tyrosine , histidine and proline contents were higher in treatment a than treatment b. The levels of frucose, melibiose, sorbitol, and arabinose in Yakju brewed from unsteamed rice were higher than in Yakju brewed from steamed rice. K content was the lowest in 9a and 9b. Na content was higher in treatment a than in treatment a than in treatment b. In only 6a, Ca/P ratio was more than one.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.6
• /
• pp.474-483
• /
• 2016

Accidental events such as collisions, groundings, and hydrocarbon explosions in marine structures can cause catastrophic damage. Thus, it is extremely important to predict the extent of such damage, which determines the total amount of oil spills and the residual hull girder strength. Punching fracture tests were conducted by Choung (2009b), where various sizes of indenters and circular unstiffened steel plates with different thicknesses were used to quasi-statically realize damage extents. A three-dimensional fracture strain surface was developed based on a reference (Choung et al., 2015b), where the average stress triaxiality and average normalized Lode angle were used as the parameters governing the fracture of ductile steels. In this study, new numerical analyses were performed using very fine axisymmetric elements in combination with an Abaqus user-subroutine to implement the three-dimensional fracture strain surface. Conventional numerical analyses were also conducted for the tests to identify the best fit fracture strain values by changing the fracture strains. Based on the phenomenon of the average normalized Lode angle starting out positive and then becoming slightly negative, it was inferred that the shear stress primarily dominates in determining the fractures locations, with a partial contribution from the compressive stress. It should be stated that the three-dimensional fracture surface effectively predicted at least the shear stress-dominant fracture behavior of a mild steel.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.3
• /
• pp.150-154
• /
• 2008

This study was investigated that quality inspection of distributed Scutellariae Radix in Korea. To evaluate the quality of these herbal medicines, we carried out TLC pattern, foreign matter in purity, loss on drying, ash, acid-insoluble ash, oil content, dilute ethanol-soluble, water-soluble, ether-soluble extracts contents, quantitative analyses, residual $SO_2$, individual heavy metals and organochlorine pesticides. To measure contents of baicalin, baicalein and wogonin, we were quantitative analyzed using HPLC. The average contents of baicalin, baicalein and wogonin were detected by 13.28 (${\pm}$0.43)%, 1.17 (${\pm}$0.04)% and 0.40 (${\pm}$0.02)%, respectively. Each average contents As, Cd, Hg and Pb was 0.059 (${\pm}$0.054) mg ${\cdot}$ $kg^{-1}$, 0.019 (${\pm}$0.010) mg ${\cdot}$ $kg^{-1}$, 0.017 (${\pm}$0.057) ppm and 0.242 (${\pm}$0.084) mg ${\cdot}$ $kg^{-1}$, respectively.

• The Korean Journal of Pesticide Science
• /
• v.12 no.4
• /
• pp.315-322
• /
• 2008

In this study, a simple, effective, and sensitive method has been developed for the quantitative residue analysis of cyhalofop-butyl and its metabolite cyhalofop acid in water and soil when kept under laboratory conditions. The content of cyholofop-butyl and cyhalofop acid in water and soil was analyzed by first purifying the compounds through liquid-liquid extraction and partitioning followed by Silica gel (adsorption) chromatography. Upon the completion of the purification step the residual levels were monitored through high-performance liquid chromatography (HPLC) using a UV absorbance detector. The recoveries of cyhalofop-butyl from three replicates spiked at two different concentrations ranged from 82.5 to 100.0% and from 66.7 to 97.9% in water and soil, respectively. The limit of detection and minimum detection level of cyhalofop-butyl in water and soil was 0.02 ppm and 10 ng, respectively. The recoveries of cyhalofop acid ranged from 80.7 to 104.8% in water and from 76.9 to 98.1 % in soil. The limit of detection of cyhalofop acid was 0.005 ppm in water and 0.01 ppm in soil, while the minimum detection level was 2 ng both in water and soil. The half-live of cyhalofop-butyl was 4.14 and 6.6 days in water and soil, respectively. The method was successfully applied to evaluate cyhalofop-butyl residues in water and soil applied aj. 30% emulsion, oil in water (EW) product.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.4
• /
• pp.723-732
• /
• 2020

The spent RHDS (Residue HydroDeSulfurization) catalyst is deactivated mainly by deposition of various contaminants such as coke, sulfur and vanadium on the surface of catalyst. To eliminate those contaminants, the following remanufacturing process was conducted. The first, heavy oil on the surface of the spent RHDS catalyst was removed by kerosene and dehydrated. The second, the high temperature incineration was carried out to eliminate coke and sulfur components deposited on the surface of spent RHDS catalyst. The third, the excessive quantity of Vanadium deposited on the surface of catalyst was removed by leaching process as follows: ultrasonic agitation was carried out at 50℃, for 10 seconds with 0.5% and 1% oxalic acid solution. The purpose of this process is to find out regenerated RHDS catalyst can be used as SCR catalyst for NOx reduction by controlling the vanadium residual content of the regenerated RHDS catalyst through leaching process. The composition of regenerated RHDS catalyst was analyzed by XRF and the NOx reduction efficiency was also measured by continuous catalytic fixed bed reactor. As the result, regenerated catalyst, with 0.5% oxalic acid, ultrasonic agitation in 10 seconds, showed the most stable NOx reduction efficiency. Also, in comparison with commercial SCR catalyst, the NOx reduction performance of regenerated catalyst was similar to that of commercial SCR catalyst at the temperature 375℃ and higher whereas was lower than commercial SCR catalyst at the temperature range between 200~250℃. Therefore, it was confirmed that the regenerated catalyst as powder form wash coated on the surface of metal corrugated substrate can be used for commercial SCR catalyst.

• Applied Biological Chemistry
• /
• v.36 no.4
• /
• pp.277-283
• /
• 1993

In order to brew foxtail millet wine, a folk wine of Cheju, properties of raw materials, optimum brewing conditions were inveatigated. Carbohydrate and crude fat content of glutinuous foxtail millet are 71.27% and 3.47%, respectively. Since the ratio of water to steamed millet and ethanol concentration of wine showed negative correlation, less than 250% water had to added to steamed millet to maintain ethanol concentration in wine above 13%, Sugar consumption and ethanol production increased rapidly for the first 2 days, and main fermentation was done in 4 days. Ethanol concentrations were $13.0{\sim}13.4%$ when foxtail millet was used, and they were $14.0{\sim}14.3%$ for the mixture substrates of 90% millet and 10% rice or barley. Organic acids in millet wine were lactic acid, malic acid and succinic acid. The residual carbohydrates after fermentation were mainly xylose and oligosaccharides. A trace of methanol was detected in millet wine. The content of fusel oil was low, while the concnetration of organic acids was high. Optimum conditions for millet wine-making were as follows. Glutinuous foxtail millet with 10% rice as fermentation source need to be soaked in water and steamed for enough time. Water was added to steamed millet with the ratio of 2 : 1. The resulting mixture was stmnultaneously saccharified and fermented by Aspergillus orzae and Saccharomyces cerevisiae IAM 4274 at $20^{\circ}C$ for a week. Millet wine was prepared after filtering fermented broth while pressing for a week.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.4
• /
• pp.62-68
• /
• 2008

The Low Temperature Thermal Desorption (LTTD) System equipped with a soil transfer unit, a rotary kiln, RTO, cyclones and a bag filter etc. was developed. The LTTD system was designed to be economically operated using LPG as a fuel and recirculating the discharged gas from the LTTD system through RTO. For the performance test of LTTD system the soil contaminated with light and heavy oils (2,690 mg TPH/kg soil) and with particle sizes below 50 mm was fed into the rotary kiln of LTTD system at 7$m^3$/hr with retention time of 15 minutes. Operation temperatures of LTTD system for the removal of soil TPH were $567^{\circ}C$ and $692^{\circ}C$. The residual TPH after treatment was 46 mg/kg and 32mg/kg respectively at each temperature condition, which shows high TPH removal efficiencies of the developed LTTD as 98.3% and 98.9%.

• Korean journal of applied entomology
• /
• v.7
• /
• pp.39-51
• /
• 1969

The study involved determination of resistance levels of spider mites ta argano-phosphates using topical application and slide dip techniques; laboratory serening tests of alternative acaricides using an O/P resistant strain and a field trial of the screened materials. 1. Strains of Tetranychus were from Timaru(TR), Havelock Narth (HNR), Lincaln (LN). Germany (GR, GN). Comparisons of the resistant strains and normal strains at the LD50 and LC50 levels were as follows : (a) Using the topical application tochnique; with Parathian. resistant levels of the GR. TR and HNR strains of T. urticae were respeativuly, 1035. 484 and 452 times as resistant' as the LN strain. (b) Using the slide dip technique; with Phosdrin, resistant of GR, TR and HNR strains of T. urticae were 635, 274 and 266 times greater respeativuly, than the GN strain. 2. The laboratory sereaning tests were carried out far their contact plus stomach and residual effect to assess the toxicities of eleven alternative materials which would be used far control of O/P resistant strain of T. urticae. The acaricide groups represented were 3 organo-chlorines (Spidex, Kelthane and C 8514), 2 nitrophenyls (UC 19786 and Morocide), 2 cyclic carbonates(Eradex and Morestan). I carbamate (UC2004 7A), 1 mixture of carbamate and orano-chlorine and 2 other chemicals (C 8677 and M2527). From all acaricide tested. Kelthane and Morocide were the most effective, folowed by Spidex and M2527. Morestan, C8514. C8677 and RS 143 were intermediate, but Eradex, UC 19786 and UC 20046A were poor. 3, The number of sapmles required for estimation of the population in the field evaluation of acaricidal effects was one giving the highest practical precision. It was decided, after preliminary sampling trials. to use samples of 30 leaves per replicate which gave a $5.7\%$ standard error. 4. In the field trials, Morocide applied at the $0.05\%\;and\; 0.04\%$ a. i. conc. to black currant trees gave excellent control of O/P resistant population of T. urticae for about 12 days, but Morocide 0.025 and Kel thane $0.02\%$ a. i. cone. gave efficient control for about 6 days. In other words. first applications of Kel thane ane Moroeide gave very high degrees of control of O/P resistant population of the two-spotted spider mite. However, the results indicate that secondary application would sometimes be necessary. There was no foliage damage of black Currants and strawberries by either acaricides at the concentrations used. Acknowledgment ... The authors are grateful to: Dr. R. P. pottinger, Senior Lecturer in Agricultural Zoology. Lincoln college. New Zealand. for his helpful assistance in aiding with the organization of thd field work. Department of agriculture officers for mite colonies. Mr. D. A. Slade, Technical Advisor. Fruitgrowers' Federation (now at Massey University) for his assistance and provision of mites for testing. Mr T. McRae of Timaru for permission to use his crops for field tests. The following chemical companies and I or their New Zealand agents for so readily supplying samples of acarides; Ivan Watkins-Dow Limited. Fruitgrowers Chemical Company Limited. Henry H. York & company (New Zealand). Shell Oil (New Zealand) Limited.

• Nuclear Engineering and Technology
• /
• v.5 no.1
• /
• pp.55-64
• /
• 1973

The effect of compression in the strain ageing of Ferrovac E iron has been examined with compressive testing following the prestrain in compression. Both prestraining and testing were preformed at room temperature with the strain rate of 1.9$\times$10$^{-4}$ se $c^{-1}$ and that of 0.95$\times$10$^{-4}$ se $c^{-1}$ , respectively. Ageing was carried out at several temperatures below 8$0^{\circ}C$ using thermostatically controlled oil baths with a temperature control within$\pm$1$^{\circ}C$. It was found that the rate of strain ageing obeyed the $t^{2}$3/ law up to about five hours ageing at 6$0^{\circ}C$. The rate was slower than theses reported in case of the tensile prestrained iron. Activation energy for strain ageing has been estimated as 21.5 Kcal/mole at tile first stage of the aging process. At the second stage of ageing where the $t^{2}$3/ law is still valid, however, the activation energy was somewhat decreased. The activation energy at the first stage of ageing was about 10% larger than published results on the tensile-prestraining. This difference between the activation energies is explained in terms of the residual stress field in lattice.