• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.204-210
• /
• 2004

Most auto-body members fabricated by the sheet metal forming process. During this process the thickness and material properties of the sheet metal are changed with the residual stress and plastic strain. This paper deals with the material properties of the sheet metal at the high strain rate considering the pre-strain effect. Specimens are selected from sheet metals for outer panels and inner members, such as SPCEN, SPRC45E, SPRC35R and EZNCD. The specimens are prepared with the pre-strain of 2, 5 and 10 % by tensile elongation in Instron 5583, which could be equivalent to the plastic strain in sheet metal forming. High speed tensile tests are then carried out with the pre-stained specimens at the strain rate of 1 to 100/sec. The experimental result informs that the material properties are noticeably influenced by the pre-strain when the yield stress of the specimens is moderate as SPCEN, SPRC35R and EZNCD. The result also demonstrates that the ultimate tensile strength as well as the yield stress is increased as the amount of the pre-strain is increased.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.1
• /
• pp.67-77
• /
• 2011

Heavy metal remediation in shooting range soil is a challenge over the world. The excessive Pb accumulation in the soil can deteriorate soil quality and fertility. The objectives of this research were to evaluate the efficiency of biochar (BC) in improving the physicochemical and biological properties of the soil and to evaluate its effect on Pb availability in a military shooting range soil. Sandy loam soil was collected from shooting range of Gyeonggi Province, South Korea and was incubated for 30 days with different application rates (0-30% w $w^{-1}$) of BC. The results showed that the addition of BC increased aggregate stability, nitrogen (N) and phosphorus (P) contents, and enzyme activities in soil. Sequential extraction showed that residual and organic bound fractions in the soil amended with BC increased by 33.1 and 16.7%, respectively, and the exchangeable fraction decreased by 93.7% in the soil amended with BC, compared to the unamended soil. We concluded that the application of BC could not only improve physicochemical and biological soil qualities but also stabilize Pb in a shooting range soil.

• Journal of Environmental Science International
• /
• v.26 no.8
• /
• pp.955-966
• /
• 2017

Amendment of multi-binders was employed for the immobilization of metal(loid)s in field-contaminated soils to reduce the leaching potential. The effect of different types of multi-binders (lime/diammonium phosphate, diammonium phosphate/ladle slag and lime/ladle slag) on the solidification/stabilization of metal(loid)s (Pb, Zn, Cu and As) from the smelter soil and mine tailing soil were investigated. The amended soils were evaluated by measuring Toxicity Characterization Leaching Procedure (TCLP) leaching concentration of metal(loid)s. The results show that the leaching concentration of metal(loid)s decreased with the immobilization using multi-binders. In terms of TCLP extraction, the mixed binder was effective in the order of lime/ladle slag > diammonium phosphate/ladle slag > lime/diammonium phosphate. When the mixed binder amendment (0.15 g lime+0.15 g ladle slag for 1g smelter soil and 0.05 g lime+0.1 g ladle slag for 1 g mine tailing soil, respectively) was used, the leaching concentration of metal(loid)s decreased by 90%. However, As leaching concentration increased with diammonium phosphate/lime and diammonium phosphate/ladle slag amendment competitive anion exchange between arsenic ion and phosphate ion from diammonium phosphate. The Standard, Measurements and Testing programme (SM&T) analysis indicated that fraction 1 (F1, exchangeable fraction) decreased, while fraction 4 (F4, residual fraction) increased. The increased immobilization efficiency was attributed to the increase in the F4 of the SM&T extraction. From this work, it was possible to suggest that both arsenic and heavy metals can be simultaneously immobilized by the amendment of multi-binder such as lime/ladle slag.

• Korean journal of food and cookery science
• /
• v.32 no.6
• /
• pp.762-772
• /
• 2016

Purpose: Adolescence is a critical period for growth and development; hence, knowledge about good food habits is essential amongst children. This study was conducted to investigate prevalence of awareness among food sellers, which could probably influence children's health and perceptions on food around schools towards adulterated food management beliefs, competencies, and food safety practices. Methods: Data was collected from 195 dealers around 25 elementary, middle and high schools in Daegu and Gyeongbuk provinces using a self-administered questionnaire in July and August, 2015. The data was analyzed using frequency analysis, one-way analysis of variance, $x^2$-test, factor analysis, and reliability analysis by SPSS Statistics (ver. 23.0). Results: A total of 121 people (62.1%) reported satisfaction of providing information and education on adulterated food. The perception of hazardous substances was found to be related to food poisoning bacteria and viruses (65.6%), heavy metals (42.1%), environmental hormones (36.4%), residual pesticides (27.2%), and irradiated food (26.7%). The perceived score on hygiene practices for processed food seller was $4.04{\pm}0.56/5.00$ and for cooked food seller was $4.09{\pm}0.45$. The capacity of adulterated food management practice of food sellers was significantly correlated with food knowledge on adulteration and public relation capacity, necessity of adulterated food management, and perception of hygiene practices (p<0.01). Similarly, knowledge and public relation capacity were significantly different according to ages (p<0.01). The perception of the necessity of adulterated food management was significantly different according to education levels (p<0.05), and the evaluation of hygiene practices was significantly different according to age (p<0.01). Conclusion: In order to solve the problem of adulterated food, which is one of the four social evils, and to strengthen the capacity of children to solve social problems, various practices like campaign on health promotion, goof food habits, education, and adulterated food management, should be actively promoted not only for children but also for food sellers around the schools.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.2
• /
• pp.87-98
• /
• 2020

Objective: The purpose of this study was to propose a sequential procedure for the simultaneous analysis of soluble and insoluble metal compounds. Methods: Methods for sampling and analyzing metal compounds such as ISO standards, NIOSH methods, HSE methods, and OSHA methods were reviewed. Results: Some metals have different OELs depending on the solubility of the compound. Therefore, we should take into account these characteristics and perform an exposure assessment. Soluble metal compounds are first extracted from the filter, and then the filter is digested by acids to analyze residual insoluble components. The extraction of soluble compounds can be completed by agitation for about 60 minutes with a leach solution (water) in a water bath at 37℃. For the analysis of insoluble compounds, the sample filter and the filtration filter remaining after the extraction of the soluble compounds are analyzed. This allows simultaneous determination of soluble and insoluble metal compounds. For hexavalent chromium compounds, soluble hexavalent chromium can first be extracted from the filter by using sulfate buffer. The insoluble hexavalent chromium remaining in the filter can then be extracted using carbonate buffer. Conclusion: Workers are often exposed to many hazardous substances with different exposure limits at industrial sites. The OELs for compounds of the same metal can be set differently depending on solubility. This study can help evaluate a worker's exposure to metal compounds by suggesting methods for the simultaneous determination of soluble and insoluble metal compounds.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.70.1-70.1
• /
• 2012

In-situ X-ray photoelectron spectroscopy (XPS) and infrared (IR) spectroscopy studies of SOFC cathode materials will be discussed in this presentation. The mixed conducting perovskites (ABO3) containing rare and alkaline earth metals on the A-site and a transition metal on the B-site are commonly used as cathodes for solid oxide fuel cells (SOFC). However, the details of the oxygen reduction reaction are still not clearly understood. The information about the type of adsorbed oxygen species and their concentration is important for a mechanistic understanding of the oxygen incorporation into these cathode materials. XPS has been widely used for the analysis of adsorbed species and surface structure. However, the conventional XPS experiments have the severe drawback to operate at room temperature and with the sample under ultrahigh vacuum (UHV) conditions, which is far from the relevant conditions of SOFC operation. The disadvantages of conventional XPS can be overcome to a large extent with a "high pressure" XPS setup installed at the BESSY II synchrotron. It allows sample depth profiling over 2 nm without sputtering by variation of the excitation energy, and most importantly measurements under a residual gas pressure in the mbar range. It is also well known that the catalytic activity for the oxygen reduction is very sensitive to their electrical conductivity and oxygen nonstoichiometry. Although the electrical conductivity of perovskite oxides has been intensively studied as a function of temperature or oxygen partial pressure (Po2), in-situ measurements of the conductivity of these materials in contact with the electrolyte as a SOFC configuration have little been reported. In order to measure the in-plane conductivity of an electrode film on the electrolyte, a substrate with high resistance is required for excluding the leakage current of the substrate. It is also hardly possible to measure the conductivity of cracked thin film by electrical methods. In this study, we report the electrical conductivity of perovskite $La_{0.6}Sr_{0.4}CoO_{3-{\delta}}$ (LSC) thin films on yttria-stabilized zirconia (YSZ) electrolyte quantitatively obtained by in-situ IR spectroscopy. This method enables a reliable measurement of the electronic conductivity of the electrodes as part of the SOFC configuration regardless of leakage current to the substrate and cracks in the film.

• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.23-29
• /
• 2006

Biosorption technology was used to remove hazardous materials from wastewater, herbicide, heavy metals, and radioactive compounds, based on binding capacities of various biological materials. Biosorption process can be explained by two steps; the first step is that target contaminants is in contact with microorganisms and the second is that the adsorbed target contaminants is infiltrated with inner cell through metabolically mediated or physico-chemical pathways of uptake. Until recently, no information is available to explain the definitive mechanism of biosorption. The purpose of this study is to evaluate biosorption capabilities of organic matters using activated sludge and to investigate affecting factors upon biosorption. Over 49% of organic matter could be removed by positive biosorption reaction under anoxic condition within 10 minutes. The biosorption capacities were constant at around 50 mg-COD/mg-MLSS for all batch experiments. As starvation time increased under aerobic or anaerobic conditions, biosorption capacity increased since higher stressed microorganisms by starvation was more brisk. Starvation stress of microorganisms was higher at aerobic condition than anaerobic one. As temperature increased or easily biodegradable carbon sources were used, biosorption capacities increased. Consequently, biosorption can be estimated by biological -adsorbed capability of the bacterial cell-wall and we can achieve the cost-effective and non -residual denitrification with applying biosorption to the bio-reduction of nitrate.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.6
• /
• pp.69-75
• /
• 2013

Miscanthus has received wide attention as an option for biomass production in Korea, recently. New strain of giant miscanthus has been developed and was planted in two large trial sites (184 ha) in the lower reaches of the Geum River. To evaluate the susceptibility of the giant miscanthus as an bioenergy crop for the future, we investigated the influence of the giant miscanthus on the soil properties. The particle size, CEC, pH, EC, T-N, T-P, heavy metal total concentration, and heavy metal fractions of soil samples collected from abandoned field, 1 year old giant miscanthus field (1st Year GM), and 2 year old giant miscanthus field (2nd Year GM) at different depths of 0~15, 15~30, and 30~45 cm in April and August were analyzed. Results showed that the CEC and pH of the soil of the giant miscanthus field were lower than those of the soil of abandoned field. The EC of 2nd GM was lower than that of abandoned field, indicating that the giant miscanthus may facilitate soil desalination process. The organic and sulfide fraction and residual fraction of heavy metals in the giant miscanthus field was higher than in abandoned field, due to the low pH of the giant miscanthus field and the excretion of phytosiderophores by rhizome of the giant miscanthus. This study showed that the giant miscanthus can influence on the soil properties and further study for long term is needed to elucidate the interaction between the soil and the giant miscanthus.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.3
• /
• pp.150-154
• /
• 2008

This study was investigated that quality inspection of distributed Scutellariae Radix in Korea. To evaluate the quality of these herbal medicines, we carried out TLC pattern, foreign matter in purity, loss on drying, ash, acid-insoluble ash, oil content, dilute ethanol-soluble, water-soluble, ether-soluble extracts contents, quantitative analyses, residual $SO_2$, individual heavy metals and organochlorine pesticides. To measure contents of baicalin, baicalein and wogonin, we were quantitative analyzed using HPLC. The average contents of baicalin, baicalein and wogonin were detected by 13.28 (${\pm}$0.43)%, 1.17 (${\pm}$0.04)% and 0.40 (${\pm}$0.02)%, respectively. Each average contents As, Cd, Hg and Pb was 0.059 (${\pm}$0.054) mg ${\cdot}$ $kg^{-1}$, 0.019 (${\pm}$0.010) mg ${\cdot}$ $kg^{-1}$, 0.017 (${\pm}$0.057) ppm and 0.242 (${\pm}$0.084) mg ${\cdot}$ $kg^{-1}$, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.8 s.185
• /
• pp.171-177
• /
• 2006

This study was performed as a part of the research on the development of a maskless and electroless process for fabricating metal micro/nanostructures by using a nanoindenter and an electroless deposition technique. $2-{\mu}m$-deep indentation tests on Ni and Cu samples were performed. The elastic recovery of the Ni and Cu was 9.30% and 9.53% of the maximum penetration depth, respectively. The hardness and the elastic modulus were 1.56 GPa and 120 GPa for Ni and 1.51 GPa and 104 GPa for Cu. The effect of single-point diamond machining conditions such as the Berkovich tip orientation (0, 45, and $90^{\circ}$ ) and the normal load (0.1, 0.3, 0.5, 1, 3, and 5 mN), on both the deformation behavior and the morphology of cutting traces (such as width and depth) was investigated by constant-load scratch tests. The tip orientation had a significant influence on the coefficient of friction, which varied from 0.52-0.66 for Ni and from 0.46- 0.61 for Cu. The crisscross-pattern sample showed that the tip orientation strongly affects the surface quality of the machined are a during scratching. A selective deposition of Cu at the pit-like defect on a p-type Si(111) surface was also investigated. Preferential deposition of the Cu occurred at the surface defect sites of silicon wafers, indicating that those defect sites act as active sites for the deposition reaction. The shape of the Cu-deposited area was almost the same as that of the residual stress field.