• 열처리공학회지
• /
• 제6권2호
• /
• pp.70-78
• /
• 1993

The presence of a residual stress in a thin film affects the properties and performances of the film, so the study of stress in a film must be very important. In this study, therefore, considering the characteristics of PECVD process, it was discussed that the residual stress, measured by $sin^2{\Psi}$ method, fo TiN films deposited on substrates with different TECs (thermal expansion coefficients) changed with film thickness. As a results, it was obtained that the residual stress of TiN film was compressive stress about all kinds of substrates and increased with film thickness. Also, the compressive residual stresses of TiN films increased in Si, Ti, STS304 order. According to the above results, we confirmed that the changes of residual stress of TiN film with substrates were due to the thermal stress originated form the difference in the TECs of the film and substrates, and that the intrinsic stress had dominating effect on the residual stress of TiN film deposited by PECVD. And in this study, the intrinsic stress of TiN film was compressive stress in spite of the Zone 1 structure. It is due to the entrapment of impurities in grain boundary or void.

• 대한기계학회논문집A
• /
• 제34권4호
• /
• pp.413-421
• /
• 2010

본 연구에서는 실제 용접 과정을 모사하는 유한요소 해석을 이용하여 강도 불일치를 가지는 매설 천연가스 배관 용접부의 잔류응력 분포를 계산한다. 유한요소 해석 절차의 타당성을 검증하기 위해 온도 및 잔류응력 해석 결과들은 실제 용융부 형상과 API 579 적용 결과와 비교된다. 기계적 강도 차이, 용접 금속의 강도, 덧살 및 입열량 등과 같은 용접 및 재료 변수들이 잔류응력 분포에 미치는 영향을 평가하기 위해 Parametric Study가 수행된다. 최종적으로 Parametric Study 결과에 근거하여 용접 및 재료 변수들의 영향이 고찰된다. 특히, 모재들 사이의 강도 불일치는 잔류응력 분포에 미미한 영향을 미침을 확인하였다.

• 대한환경공학회지
• /
• 제27권6호
• /
• pp.626-634
• /
• 2005

본 연구에서는 강원도내 4개의 폐금속광산에서 발생되는 광미와 주변 토양의 중금속 오염현황 및 오염도를 평가하였다. 광미와 주변 토양의 오염정도는 총 중금속농도 기준으로 원동>제2연화>신예미${\fallingdotseq}$상동 순이었으며, 이들 광미는 배경토양 및 Kloke 값보다 각각 $1.2{\sim}78.2$와 $1.1{\sim}80.6$배가 높은 농도로서 주변 토양을 오염시키고 있었다. 광미내 대다수 중금속의 화합물형태는 잔류성이 대부분이었다. 비잔류형태 화합물에서는 상당부분이 환원성과 산화성이어서 장기간에 걸쳐 산화환경조건에 따라 중금속이 유출될 것으로 보이며 특히, 제2연화의 Cd은 교환성과 탄산염 화합물이 쉽게 유출되어 단기간에 주변 환경을 오염시킬 가능성이 클 것으로 판단된다. 우리나라 토양오염기준치의 초과여부 검토결과 많은 시료에서 토양환경보전법의 우려기준 및 대책기준 이상인 것으로 나타나 이에 대한 처리대책이 필요하였다. PI에 의한 오염도평가에서는 4개의 광산지역 모두 1.0 이상보다 훨씬 높아 오염정도가 심각하였으며 복원시 최우선 광산은 원동이었다. 또한, DI에 의한 복원수준정도 평가결과에서 원동광산은 단기간에 유출 가능한 교환성부터, 나머지 광산은 중 장기간에 걸쳐 유출되는 환원성부터 우선적으로 제거해야 할 것으로 나타났다.

• 한국토양비료학회지
• /
• 제40권2호
• /
• pp.164-171
• /
• 2007

공단인근의 여러 중금속이 복합적으로 오염된 토양에서 중금속의 존재형태와 미나리 중 함량과의 관계를 평가하기 위하여 미나리 재배토양, 농수로 퇴적 저니토 및 대조토양과 동일지점에서의 미나리를 채취하여 분석 검토하였다. 토양의 중금속 총함량 중 Cd, Cu 및 Ni의 평균농도가 Kloke (1979)가 제안한 중금속의 허용한계치를 초과하였다. 중금속별 토양 내 주된 존재형태는 Cd이 치환태였고, 다른 중금속 (Cu, Zn, Ni 및 Pb)은 Fe-Mn 산화물 및 잔류 형태로 나타났다. 재배토양과 농수로 저니토의 형태별 함량에 의하여 환산된 잠재적인 중금속 이동계수는 Cd>Zn>Ni>Cu>Pb 순이였고, 특히 Cd의 경우 대조토양에 비하여 매우 높은 것으로 알수 있었다. 토양의 Cd 전함량과 토양 내 이동성이 높은 치환성 및 Fe-Mn 산화물 분포비율과는 정의 상관, 이동성이 낮은 잔류태와는 부의 상관을 보였다. 미나리 부위별 중금속은 대부분이 뿌리에 축적되었으며, 지상부로의 이행성은 Cd과 Zn가 줄기에서 높았고, Cu와 Ni 함량은 오히려 잎에서 높았다. 토양 중금속 중 Cd, Cu 및 Ni의형태별 함량과 미나리 중 함량과 관련성이 높았고, 특히 치환성 Cd과 Ni 함량은 미나리 중 함량과 고도의 정의상관을 보였다.

• 한국해양학회지
• /
• 제18권2호
• /
• pp.180-184
• /
• 1983

진해만 퇴적물 중의 중금속 분포를 조사하기 위하여 8개의 조사점에서 시료 를 채취하여 흡착부분, 환원부분, 산화부분 및 잔류부분으로 중금속을 분류하였다. 본 조사 결과로는 Cd은 흡착부분에, Cu는 산화 및 잔류부분에, Pb와 Zn는 환원 부분에 주로 분포되어 중금속에 따라 큰 차이를 보여주었다. 또 Cu, Pb 및 Zn의 농도는 내만에서 외양으로 갈수록 농도가 뚜렷이 감소되는 선형희귀곡선을 얻었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.859-864
• /
• 2004

In this study, we compared the fatigue characteristics of weld metal with those of base metal. Also we examined the influence of heat treatment and weld bead profiles for the fatigue life of weld metals. From the experimental results, it was seen that the fatigue characteristics of welded specimens with a grinded toe of bead are slightly better than those are not grinded. Also the fatigue life is affected more by the stress concentration on the profile change in the weld toe rather than by residual stress influence, because the fatigue characteristic of weld metals was not influenced whether the heat treatment is conducted or not.

• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.40-46
• /
• 2014

Bonding technology and bonding mechanism of metal to ceramic including brazing, diffusion bonding, friction welding and etc were reviewed in this study. Various factors should be considered from a bonding design step to acquire a good bonding joint because of a large difference between metal and ceramic in crystal lattice, coefficient of thermal expansion and various properties. In addition, metal and ceramic bonding technologies are constantly being developed according to precise components, multi-function and application to harsh environment. However, improvement of bonding properties and bonding reliability also should be accompanied. Bonding of ceramics, such as $ZrO_2$, $Ti_3AlC_2$ and SiC, to metals like Ti-alloy, TiAl and steel were described in this paper.

• 산업기술연구
• /
• 제20권A호
• /
• pp.57-62
• /
• 2000

This experiment was done to investigate the leaching and adsorption properties of heavy metals on porphyry. The comparison with respect to the leachability of heavy metals from porphyry between the Korea Standard Leaching Test (KSLT) and the Toxicity Characteristic Leaching Procedure (TCLP) was carried out. The fractional composition of leachate and the total concentration of heavy metal of porphyry were studied through Sequential Extraction Procedure (SEP) and EPA Method 3050. Adsorption experiment of porphyry has pointed out that the optimum dosage of porphyry for 50ppm Pb was over 10g/L, the effective particle size for absorption was below 200 mesh and the optimum pH was about 7. From the Freundlich' adsorption equation, 1/n was 1.0722, and k was 0.0041. After adsorption, the fractional composition of Pb was changed. The exchangeable, carbonate, reducible fractions were increased, and the organic fraction was not changed, and the residual fraction was decreased.

• 한국광물학회지
• /
• 제10권2호
• /
• pp.139-147
• /
• 1997

The Janghang smelter is the first lead, zinc and copper smelting facility in Korea which was operated for a half century from 1936 to 1989. The clay minerals and their heavy metal association in the soil profile around the smelter have been studied using XRD, EPMA, SEM-EDS, TEM, EPR and sequential extraction techniques. The soils in A horizon are highly acidic showing pH 4.45. The pH is going up with increasing depth. They have residual water contents of 1.18-1.51 wt%, loss on ignition of 6.32-7.79 wt%, and carbon contents of 0.08-0.88 wt%. Soils consist of quartz, feldspar, muscovite, kaolinite, vermiculite, biotite, chlorite, goethite and hematite in the decreasing abundance. The contents of clay minerals, especially vermiculite and chlorite, decrease with increasing depth. Sequential extraction experiments for the profile samples show that heavy metals (Zn, Cu, Pb, Cd) are highly concentrated in the A horizon of the soil profile as water-extractable (mostly amorphous), MgCl2-extractable (exchangeable in clay minerals), and organic phases. The heavy metal contents decrease with increasing depth. It suggests that the heavy metals are mainly associate with clay minerlas in an exchangeable state. It is also noted that heavy metals are highly concentrated in the manganese and iron oxide phases.

• Advances in environmental research
• /
• 제6권4호
• /
• pp.281-299
• /
• 2017

Single (0.005 M DTPA), sequential (six-step) and kinetic (0.05 M EDTA) extractions were performed to assess Cd, Cr, Cu, Ni, Pb, and Zn mobilization and their potential ecological risks in Abuja (Nigeria) water (WTS) and wastewater (WWTS) treatment sludges. Total metal levels (mg/kg) in WTS and WWTS, respectively were: Cd(3.67 and 5.03), Cr(5.70 and 9.03), Cu(183.59 and 231.53), Ni(1.33 and 3.23), Pb(13.43 and 17.87), Zn(243.45 and 421.29). DTPA furnished metal extraction yields (%) in WTS and WWTS, respectively as: Cd(11 and 6), Cr (15 and 7), Cu(17 and 13), Ni(23 and 3), Pb(11 and 12), and Zn(37 and 33). The metals were associated with the soluble/exchangeable, carbonate, Mn/Fe-oxide, organic matter and residual forms to varying degrees. Kinetic extractions cumulatively leached metal concentrations akin to the mobilizable fractions extracted sequentially and the leaching data fitted well into the Elovich model. Metal mobilities were concordant for the three leaching procedures and varied in the order:WTS>WWTS. Calculated ecological risk indices suggested moderate and considerable metal toxicity in WTS and WWTS, respectively with Cd as the worst culprit. The findings may be useful in predicting heavy metals bioavailability and risks in the sludges to guide their disposal and use in land applications.