• Journal of Periodontal and Implant Science
• /
• v.47 no.6
• /
• pp.388-401
• /
• 2017

Purpose: The physicochemical properties of a xenograft are very important because they strongly influence the bone regeneration capabilities of the graft material. Even though porcine xenografts have many advantages, only a few porcine xenografts are commercially available, and most of their physicochemical characteristics have yet to be reported. Thus, in this work we aimed to investigate the physicochemical characteristics of a porcine bone grafting material and compare them with those of 2 commercially available bovine xenografts to assess the potential of xenogenic porcine bone graft materials for dental applications. Methods: We used various characterization techniques, such as scanning electron microscopy, the Brunauer-Emmett-Teller adsorption method, atomic force microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, and others, to compare the physicochemical properties of xenografts of different origins. Results: The porcine bone grafting material had relatively high porosity (78.4%) and a large average specific surface area (SSA; $69.9m^2/g$), with high surface roughness (10-point average roughness, $4.47{\mu}m$) and sub-100-nm hydroxyapatite crystals on the surface. Moreover, this material presented a significant fraction of sub-100-nm pores, with negligible amounts of residual organic substances. Apart from some minor differences, the overall characteristics of the porcine bone grafting material were very similar to those of one of the bovine bone grafting material. However, many of these morphostructural properties were significantly different from the other bovine bone grafting material, which exhibited relatively smooth surface morphology with a porosity of 62.0% and an average SSA of $0.5m^2/g$. Conclusions: Considering that both bovine bone grafting materials have been successfully used in oral surgery applications in the last few decades, this work shows that the porcinederived grafting material possesses most of the key physiochemical characteristics required for its application as a highly efficient xenograft material for bone replacement.

• Advances in Traditional Medicine
• /
• v.7 no.5
• /
• pp.477-484
• /
• 2008

The present study was aimed at investigating the hypouricemic and xanthine oxidase inhibitory activities of the various fractions of the hydromethanolic extract of the leaves of Coccinia grandis L. Voigt (Cucurbitaceae). The leaves of this species was used in traditional medicinal system for the treatment of gout, rheumatism, jaundice, bronchitis, fever, skin eruptions, wounds, etc. The degree of xanthine oxidase inhibition was determined in vitro by measuring the increase in absorbance at 295 nm associated with uric acid formation. Among the fractions tested, the chloroform fraction exhibited highest potency ($IC_{50}$ $17.8\;{\mu}g/ml$). This was followed by the pet-ether ($IC_{50}$ $29.7\;{\mu}g/ml$), ethyl acetate ($IC_{50}$ $41.2\;{\mu}g/ml$) and residual ($IC_{50}$ $47\;{\mu}g/ml$) fractions. The $IC_{50}$ value of allopurinol was $6.1\;{\mu}g/ml$. In addition, the hypouricemic and hepatic xanthine oxidase (XO)/xanthine dehydrogenase (XDH) inhibitory activities of the fractions were examined in vivo using oxonate (280 mg/kg, i.p.) induced hyperuricemic mice. At a dose of 200 mg/kg orally for 7 days, the pet-ether, chloroform and ethyl acetate fractions produced a significant (P < 0.01) reduction in serum urate level and also inhibited hepatic XO/XDH activities when compared to hyperuricemic mice. These inhibitory effects were weaker than that observed for the standard drug, allopurinol (10 mg/kg, p.o.). Lineweaver-Burk analysis of the enzyme kinetics indicated that the mode of inhibition was of a mixed type. These results suggest that the use of Coccinia grandis leaves for the treatment of gout could be attributed to its XO inhibitory activity.

• Radiation Oncology Journal
• /
• v.31 no.3
• /
• pp.162-170
• /
• 2013

Purpose: To analyze the outcome of adjuvant postoperative external beam radiotherapy (EBRT) in well-differentiated thyroid cancer (WDTC). Materials and Methods: We identified 84 patients treated with EBRT for WDTC from February 1981 to December 2010. Among them, we analyzed 39 patients who received EBRT after initial radical surgery. Twenty-four females and 15 males were included. The median age was 49 years (range, 16 to 72 years). There were 34 papillary thyroid carcinomas and 5 follicular thyroid carcinomas. Most patients showed pathologic T3/T4 stage (54%/26%). Ten patients (25.6%) had gross residual tumors. Five patients (12.8%) had tumor cells at the margin. The median EBRT dose and fraction size were 62.6 Gy and 1.8 to 2.0 Gy, respectively. Results: The median follow-up was 73 months (range, 21 to 372 months). The five-year overall survival (OS) and locoregional recurrence free survival (LRFS) were 97.4% and 86.9%, respectively. Locoregional failures occurred in 5 and all failure sites were the neck node area. In univariate analysis, OS was significantly influenced by invasion of the trachea (p = 0.016) or esophagus (p = 0.006). LRFS was significantly decreased by male (p = 0.020), gross residuum after resection (p = 0.002), close or positive tumor at surgical margin involvement (p = 0.044), and tracheal invasion (p = 0.040). No significant prognostic factor was identified in the multivariate analysis. No patient experienced the Radiation Therapy Oncology Group grade 3 or more toxicity. Conclusion: Our locoregional control rate of 87.2% is comparable to historical controls with surgery alone, even though our study had a large proportion of advanced stage. Adjuvant EBRT may an effective and safe treatment option in patients with WDTC.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.2
• /
• pp.109-117
• /
• 2006

Photoinhibition and photoprotection of PSII in the leaves of hot pepper (Capsicum annuum L.) grown in Hoagland solution and Tap water were compared. Though changes in the rates of $O_2$ evolution as a function of photon fluence rate (PFR) were comparable, the rates of respiration in the dark was 3 times higher in the Hoagland solution grown leaves than in the Tap-water grown ones. Compared to Hoagland solution grown plane, PSIIs of Tap water grown pepper leaves were more susceptible to photoinhibitory light treatment. In order to inactivate functional PSII to the same extents, Hoagland solution grown plants required almost 2-fold high light $(1600{\mu}molm^{-2}s^-)$ treatment than those of Tap water $(900{\mu}molm^{-2}s^-)$. Interestingly, the remaining fraction of PSII in Hoagland grown pepper was able to survive under prolonged illumination in the presence of lincomycin, which probably means that the growth condition of plant seemed to have an effect on the recovery of PSII from light stress. When PSII was severly photoinactivated at a chilling temperature, recovery was observed only if the residual functional PSII were not inhibited with DCMU, Nigericin and MV during recovery. In conclusion, PSIIs grown in the Hoagland solution was more resistant to excess light than in the Tap water grown one and the recovery of PSII from photodamage was more efficient in Hoagland grown pepper leaves than Tap water grown one, which means that the increased dark respiration may play a important role in the protection of PSII from photoinhibition by helping repair photosynthetic proteins (in particular, the D1 protein of PSII) degraded by photoinhibition.

• Nuclear Engineering and Technology
• /
• v.48 no.4
• /
• pp.847-858
• /
• 2016

An overview is given on the work of the Laboratory of Nuclear Energy Systems at ETH, Zurich (ETHZ) and of the Laboratory of Thermal Hydraulics at Paul Scherrer Institute (PSI), Switzerland on tight-lattice bundles. Two-phase flow in subchannels of a tight triangular lattice was studied experimentally and by computational fluid dynamics simulations. Two adiabatic facilities were used: (1) a vertical channel modeling a pair of neighboring sub-channels; and (2) an arrangement of four subchannels with one subchannel in the center. The first geometry was equipped with two electrical film sensors placed on opposing rod surfaces forming the subchannel gap. They recorded 2D liquid film thickness distributions on a domain of $16{\times}64$ measuring points each, with a time resolution of 10 kHz. In the bubbly and slug flow regime, information on the bubble size, shape, and velocity and the residual liquid film thickness underneath the bubbles were obtained. The second channel was investigated using cold neutron tomography, which allowed the measurement of average liquid film profiles showing the effect of spacer grids with vanes. The results were reproduced by large eddy simulation + volume of fluid. In the outlook, a novel nonadiabatic subchannel experiment is introduced that can be driven to steady-state dryout. A refrigerant is heated by a heavy water circuit, which allows the application of cold neutron tomography.

• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.701-709
• /
• 2002

To synthesize a new positive photosensitive polyimide precursor, parts of carboxylic acid groups in poly (amic acid) were esterified with 4,5-dimethoxy-2-nitrobenzyl bromide in the presence of K$_2$CO$_3$/HMPA followed by the chemical imidization of residual carboxylic acid units. The chemical structure of resulting polymer was characterized by $^1$H-NMR, UV/vis and FT-IR spectroscopic methods, and its thermal properties were examined by DSC and TGA. Upon UV irradiation, 4,5-dimethoxy-2-nitrobenzyl moiety underwent the photodegradation. As a result, the polymer became soluble in alkaline developer due to the formation of carboxylic acid moiety, which was used to make a micron-sized positive pattern. Sensitivity curves were obtained from the gel fraction experiments with respect to the various 4,5-dimethoxy-2-nitrobenzyl ester contents. From those curves, the sensitivity was ranged iron 4000 to 6000 mJ/㎠, and the contrast was measured to be from 3.1 to 4.9.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.36.2-36.2
• /
• 2009

We present GALEX (Galaxy Evolution Explorer) far (FUV) and near (NUV) ultraviolet imaging of 34 nearby early-type galaxies from the SAURON representative sample of 48 E/S0 galaxies, all of which have ground-based optical imaging from the MDM Observatory. The surface brightness profiles of nine galaxies (~26 per cent) show regions with blue UV-optical colours suggesting recent star formation. Five of these (~15 per cent) show blue integrated UV-optical colours that set them aside in the NUV integrated colour-magnitude relation. These are objects with either exceptionally intense and localised NUV fluxes or blue UV-optical colours throughout. They also have other properties confirming they have had recent star formation, in particular Hbeta absorption higher than expected for a quiescent population and a higher CO detection rate. This suggests that residual star formation is more common in early-type galaxies than we are used to believe. NUV-blue galaxies are generally drawn from the lower stellar velocity dispersion (sigma_e <200 km/s) and thus lower dynamical mass part of the sample. We have also constructed the first UV Fundamental Planes and show that NUV blue galaxies bias the slopes and increase the scatters. If they are eliminated the fits get closer to expectations from the virial theorem. Although our analysis is based on a limited sample, it seems that a dominant fraction of the tilt and scatter of the UV Fundamental Planes is due to the presence of young stars in preferentially low-mass early-type galaxies.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.5
• /
• pp.552-557
• /
• 2014

The objective of the This study is to access the speed performance employing the sea trial test and CFD with the our own designed and manufactured one-man boat. The overall design process including hull form design was explained. The sea trial was carried out with a manufactured boat in the clam sea. Brake power at the design speed of a boat through the sea trial was measured as 1680 W. The flow computation was conducted considering free surface and dynamic trim using a commercial CFD code(STAR-CCM+). The result of computation provided the information that residual resistance is bigger than fraction's at design speed. The total efficiency were predicted based on the sea trial and CFD. The Total efficiency was divided into shaft efficiency and quasi-propulsive efficiency. By using quasi-propulsive efficiency, it becomes possible to predict speed performance of boat in future. The results can provide information regarding hull form design, performance analysis and development of a boat in future.

• Journal of the Korean Ceramic Society
• /
• v.44 no.7
• /
• pp.381-386
• /
• 2007

A porous reaction bonded silicon carbide (RBSC) was fabricated by a molten Si infiltration method. The porosity and flexural strength of porous RBSC fabricated in this study were dependent upon the amount of carbon source used in the SiC/carbon preform as well as the amount of Si infiltrated into the SiC/carbon preform. The porosity and flexural strength of porous RBSC were in the range of $20 vo1.{\sim}49 vo1.%$ and $38{\sim}61 MPa$, respectively. With increase of carbon contents and molten Si for infiltration, volume fraction of the pores was gradually decreased, and flexural strength was increased. The porous RBSCs fabricated with the same amount of molten Si show less residual Si around neck with increase of carbon source, as well as a new SiC was formed around neck which resulted in the decreased porosity and improvement of the flexural strength. In addition, decrease of the porosity and increase of the flexural strength were also obtained by increase of the amount of molten Si with the same amount of carbon source. However, it was found that the flexural strength of porous RBSC depends on the porosity rather than the amount of the newly formed SiC in neck phase between SiC particles used as a starting material.

• Applied Biological Chemistry
• /
• v.31 no.2
• /
• pp.162-168
• /
• 1988

The contents of minerals of the milled fractions of degermed Japonica and J/Indica brown rices were determined. The fraction I(about 4.4% of the kernel weight) contained 14.8 times as much sodium as did the original kernel; phosphorus, 5.7 times; potassium and iron, 5.4 times; magnesium, 4.2 times; calcium, 3.8 times; manganese, 3.7 times; Copper, 3.6 times; and Zinc, 2.3 times. Concentrations of these minerals were the lowest in the residual kernel, which contained less than the original brown rice. Sodium showed the most deepest concentration gradient, while iron was the most evenly distributed within the kernel in all samples.