• 한국환경과학회지
• /
• 제4권3호
• /
• pp.197-206
• /
• 1995

Surface heat balance of the northern sea of Cheju Island for summer in 1993 and 1994 is analyzed using the observation data obtained by Marine Research Institute, Cheju National University. Each flux elements at the sea surface is derived from the marine meteorological reports with application of an aerodynamical bulk method for the turbulent heat fluxes, and empirical formulae for the long-wave radiation heat fluxes. The flux divergence of oceanic heat transport and the rate of heat storage in the ocean are estimated as residual. The features of the surface heat balance are mainly decided by the solar radiation flux and the latent heat flux for 199B. But the Bowen Ratios were large for 1993. This means that the sensible heat fluxes were nearly equal to the latent heat fluxes for 1993. In this period, mean flux divergence of oceanic heat transport is about 130 W/$m^2$.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.238-246
• /
• 2001

Residual stresses and thermal deformation of a structure due to welding are very imfortant factors for a weld design. It has been carried therretical analysis to invesitigate influence of heat flux to residual stresses and thermal deformation producted by curcumferential welding. Temperature,stresses and deformationn are obtain as a function of circumferentisl drgree and distance from welding center line. These result can applicate to predict and remove the deformation or residual stresses built up by welding.

• 한국항해항만학회지
• /
• 제26권5호
• /
• pp.529-535
• /
• 2002

2-체널 링-코어 프럭스-게이트 콤파스(Two-Channel Ring-Core Flux-Gate Compass; TCRC FG-Compass)의 성능평가 시스템 설계와 구현방법 및, 다항회귀 모형 기반의 평가 절차와 방법을 기술했다. 성능평가 시스템은 스템모터 구동 유닛과, 방위정보 전송 유닛, 다항회귀식에 의한 평가 프로그램 등으로 구성하였다. 성능평가 실험결과, TCRC FG-Compass는 잔차가 $2^{\circ}$인 반면, 기존의 FG-Compass는 잔차가 $4^{\circ}$임을 나타냈다. 따라서 성능이 향상된 새로운 FG-Compass 설계가 가능함을 확인하였다. 또한, 자동으로 잔차를 추정하고 보정할 수 있는 설계론에 관해서도 논의하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.79-84
• /
• 2003

A fictitious crack model was used to analyze fatigue crack growth under the influence of residual stress. In the fictitious crack model, crack is represented in terms of the separation of two adjacent interfaces and the constitutive equation between the separation and traction is assumed. The effect of fatigue loading was included in the constitutive equation by considering damage accumulation in the cohesive zone. To investigate the effect of the residual stress on the fatigue crack growth, we calculated the residual stress distribution due to transient heat flux to the specimen by finite element method. Fatigue crack growth was simulated by the fictitious crack model with repeated loading. The mode-I crack growth rates were compared for the cases with and without the compressive residual stress around the crack tip. It was observed that the mode-I crack growth can be suppressed by compressive residual stress.

• 한국해안·해양공학회논문집
• /
• 제24권1호
• /
• pp.16-25
• /
• 2012

경기만 염하수로 입구인 영종대교 남단에서 평수기와 홍수기에 13시간동안 연속적으로 층별 유속관측을 수행하였다. 홍수기와 평수기에 한강과 임진강으로의 평균 담수유입량은 각각 약 $8000m^3/s$, $200m^3/s$로 40배의 큰 차이를 보이는데 이러한 변화가 잔차류의 공간 분포와 총 유출입량에 어떠한 차이를 보이는지 분석하였다. 수집된 자료의 분석을 위하여 조석주기 동안의 평균이 필요하며, 반복 관측된 자료의 연직위치와 수평격자위치를 일치시킬 필요성이 있다. 따라서 본 연구에서 공간적 sigma 격자 체계로 변환시켰다. 변형된 sigma 좌표체계는 z-level상의 원시자료와 비교하였을 때 5%이내의 오차로 자료분석에 무리가 없는 것으로 판단되었다. 분석결과 평수기 단면 잔차류는 수로의 수심에 따라 패턴이 다른 수평적 2층 흐름 구조를 보였으며, 홍수기의 경우 표층에서는 낙조하고, 저층에서는 창조하는 수직적 2층 흐름구조를 보였다. 이는 담수의 유입량에 따라 단면에서 공간적 잔차류 흐름구조가 크게 변동되는 특성이 나타났다. 총 수송량은 평수기와 홍수기에 각각 $359m^3/s$, $261m^3/s$ 로 약 $100m^3/s$의 차이를 보였다. 홍수기 많은 양의 담수 유입이 발생하였지만, 총 수송량과 적은 상관도를 보인 것은 염하수로 남단 해역에서 Stokes drift의 크기가 강하게 나타나기 때문으로 보여지며, 총량은 강화도와 영종도 사이의 조간대 지역으로 이동하는 것으로 짐작된다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.657-660
• /
• 2002

In this paper, a study on the residual stress of plate with longitudinal stiffeners is explained in terms of the welding sequences. In order to verify the results of numerical analysis, the hole drilling method (HDM) is performed, to measuring the residual stresses of the test plates in $CO_2$ Flux Cored Arc Welding (FCAW) under various welding conditions. The non-linear transient analysis technique for the numerical analysis in a large and complicate structure is considered. The residual stress of plate in consideration of the welding sequences and directions is evaluated by some numerical simulations and also by experiments. Comparison of numerical analysis results with experimental data shows the accuracy and validity of the proposed method.

• International Journal of Korean Welding Society
• /
• 제4권1호
• /
• pp.10-14
• /
• 2004

In this paper, a study on the residual stress of plate with longitudinal stiffeners is explained in terms of the welding sequences. In order to verify the results of numerical analysis, the hole drilling method (HDM) is performed, to measuring the residual stresses of the test plates in $CO_2$ Flux Cored Arc Welding (FCAW) under various welding conditions. The non-linear transient analysis technique for the numerical analysis in a large and complicate structure is considered. The residual stress of plate in consideration of the welding sequences and directions is evaluated by some numerical simulations and also by experiments. Comparison of numerical analysis results with experimental data shows the accuracy and validity of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전력기술부문
• /
• pp.78-80
• /
• 2007

The residual flux in transformer's iron cores leads to a distortion of short-circuit current occasionally. And some considerable distortion may have effect on the validation of the test results. To avoid the substantial distortion, a suitable pretest is performed before the actual test. In case of applying this method there must be excessive overvoltage due to switching of an unloaded transformer and chopping of an excitation current. The purpose of this paper is estimate that the effect of the overvoltage results from this phenomenon on insulation performance of short-circuit transformer.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1991년도 추계학술발표회논문집
• /
• pp.45-47
• /
• 1991

In this research, we verify the relations between the mechanical hardness of a strip and the output of Residual Magnetic Flux Detector, which is installed in the end side of #2 CAL. First, we install the strip speed detector and get a hardness signal and a speed signal 2 seconds, and then do signal processing and send an output to a printer every 30 seconds. The system that performs above functions is Magnetic Hardness Data Acquisition & Processing System. We got the relation between output current and hardness for the strip of T3 BP through on-line tests. Seconds, we made a hardness Measurement Simulator and observed the speed characteristics of residual magnetic flux, with using it.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.783-784
• /
• 2006

In case of a difference exist between the experimental value and estimated value of back-emf, there can be a difference of turn number or residual flux density of permanent maget of the motor. In order to presume the turn number, the average length for each coil is used to calculate the resistance. However in producing the motor, doc to the tension of coil, the outer diameter of coil becomes smaller, and then the resistance estimated by average length for each coil is not correct. Therefore in this paper, through the comparison of experiment value and estimated value of inductance, a method of presuming the turn number and PM's residual flux density of an IPM motor is presented. The inductance of IPM motor changes with the rotor position, therefore the rotor part is taken out and then the inductance in open circuit condition is measured. In the analytical calculation, 3D FEM(Finite Element Method) is used, which can consider the leakage flux of end turns in frinzing effect.