• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.2
• /
• pp.20-27
• /
• 2010

In order to prevent the corrosion of component contacted primary water designed alloy 600 material in the nuclear power plant. But the primary water stress corrosion cracking(PWSCC) of alloy 600 and weld area occurs continuously due to the residual stress. The leakage accident resulted from PWSCC in the drain nozzle of the steam generator of domestic power plants. Heater sleeves of the pressurizer are welded with alloy 600 weld material and therefore exposed to the primary water environment. PWSCC occurred in heater sleeve material and weld area of many foreign power plants. The current issue of domestic nuclear power plants are consequently concentrated to PWSCC of similar material. In order to improve the detection and the sizing of the PWSCC in the welding sleeve of the pressurizer, the automatic UT system and multi-directions probe sets have been developed. The experimental studies have been performed using the mock-up block containing artificial reflectors(ID connected EDM notch) and semi-artificial cracks made from thermal fatigue. The automatic UT System is applied in the detection and the length sizing of the ID/OD on the tube and the J-groove weld area of the artificial reflectors and results of the detection and the sizing are compared respectively. Also, the developed automatic UT system is successfully accomplished to inspect the heater sleeve and the J-groove weld area on the pressurizer for the detection of PWSCC.

• Journal of Applied Biological Chemistry
• /
• v.63 no.3
• /
• pp.243-248
• /
• 2020

The long-chained perfluoroalkyl acids (PFAAs), perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS), are a potential exposure risk in the environment, specifically for humans due to high levels of bioaccumulation, persistence, and toxicity. In the current study, the plant uptake factors (PUFs) of spinach and Welsh onion were investigated on the three different concentration levels of PFOA and PFOS in soil. Spinach and Welsh onion were divided into three residue groups, a control group and two levels of PFOA and PFOS. The PFAAs spiked soils were aged for six months and the extractable residue of PFOS in the aged soil was reduced to 30-59% of the initial spiked concentrations for PFOS, while PFOA showed almost the same initial spiked concentrations. The PUFs for PFOA and PFOS were 0.111-2.821 and 0.047-3.175 for spinach, and 0.203-0.738 and 0.035-0.181 for Welsh onion, respectively. The highest PUF values in both vegetable were displayed when the residual concentration of PFAAs were part-per-billion (ppb) or sub-ppb in soil.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.1
• /
• pp.47-58
• /
• 1994

Field observation and numerical experiments with a two-dimensional depth-integrated model were undertaken in order to investigate some of the effects on the flow structure resulting from the construction of a bridge connecting Kohung Peninsula and the Narodo Islands on the southern coast of Korea. Tidal currents passing through the straits between the Narodo Islands showed that, although the phase lagged one hour behind that passing through the strait between Kohung Peninsula and Naenarodo Island, it still kept strong flows of more than 80cm/sec near the bottom. The seawater temperature and salinity within the study area seemed to be higher southward but uniform vertically. The results of the drogue experiments in the straits between the Narodo Islands showed that the drogues moved northward of Sayangdo in the early part of the flood tide, but southward in the late part of the flood tide and finally stopped a mile from the east coast of Surakdo. On the other hand, the numerical computation showed that the flow structures after construction of the bridge piers were basically in line with those before construction of the bridge piers, except for the slight variations of velocities in the vicinity of the bridge piers. A large scale clockwise circulation has been confirmed in the south area of Namsungri of Kohung Peninsula from the computational results of tide-induced residual currents. Referring to these computational results, the impact category on the flow structures due to the bridge piers construction has been estimated to be within around 2km. The results were in good agreement with the field observations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.484-492
• /
• 2013

With the industrial acceleration in a lot of countries of the world, the demand for anti-corrosion and anti-abrasion material increases continuously. Particularly, stainless steel with the fine surface and excellent corrosion resistance is widely used in various industrial fields including ship, offshore structures tidal power plant, and etc. In marine environment, however, it is easy to generate by the corrosion damage by $Cl^-$ ion and cavitation damage due to high rotation speed on stainless steel. Therefore, in this research, the cavitation erosion-corrosion test (Hybrid test) was performed for 304 stainless steel specimen used in the high flow rate seawater environment. And the cavitation damage behavior in the corrosive environment was analyzed overall. The high hardness was shown due to the formation of compressive residual stress by the water cavitation peening effect in cavitation condition. However, high current density in the potentiodynamic polarization experiment presented with the breakdown of the passive film caused by physical impact. Therefore, both electrochemical characteristics and mechanical properties must be taken into account to improve the cavitation resistance in seawater.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.2
• /
• pp.5-14
• /
• 2006

It has been reported that the failure of a slope in weathered soils or rocks induced by intensive rainfall occurs mainly within 2.0m below the ground surface, and that the effect of rainfall on the rise of the ground water level is not significant if the ground water level inside the slope is not so high before rainfall. Most slopes in Korea, however, have been examined to rather fail at the deeper part since they are usually designed on the basis of assumption that the ground water level rises up to the surface when raining. In this study, the rise of ground water level and slope stability were examined in order to verify the appropriateness of the current ground water level condition that has a significant effect on slope stability using the average daily rainfall in Seoul for the last 30 years. The result showed that the ground water level appears to rise up to 6.0~41.0% of the slope height respectively, and therefore the currently applied condition of ground water level may be somewhat overestimated.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.2
• /
• pp.70-80
• /
• 2014

We carried out numerical experiments to understand sedimentary environments in Gamak Bay where is located in the center of the southern coast of Korea. Deposition rates in Gamak Bay appeared to increase in the autumn and spring whereas they appeared to decrease in the summer and winter. These seasonal variations qualitatively coincided with seasonal variations of Ignition Loss (IL) for surface sediments. Furthermore, deposition rates turned out to be prevalent compared to erosion rates in most areas of the bay. On the other hand, current measurement results at both the northeast and south mouths of the bay showed their residual components to flow into the bay. Therefore, we can conclude that contaminated materials flowing into Gamak Bay will precipitate to be deposited in the bay as long as there is no specific events such as dredging.

• Journal of Biomedical Engineering Research
• /
• v.18 no.3
• /
• pp.223-231
• /
• 1997

In this paper, an interframe coding method for volumetric medical images is proposed. By treating interslice variations as the motion of bones or tissues, we use the motion compensation (MC) technique to predict the current frame from the previous frame. Instead of a block matching algorithm (BMA), which is the most common motion estimation (ME) algorithm in video coding, image warping with biolinear transformation has been suggested to predict complex interslice object variation in medical images. When an object disappears between slices, however, warping prediction has poor performance. In order to overcome this drawback, an overlapped block motion compensation (OBMC) technique is combined with carping prediction. Motion compensated residual images are then encoded by using an embedded zerotree wavelet (EZW) coder with small modification for consistent quality of reconstructed images. The experimental results show that the interframe coding suing warping prediction provides better performance compared with interframe coding, and the OBMC scheme gives some additional improvement over the warping-only MC method.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.371-372
• /
• 2007

The major causes of electrical fire are classified to short circuit fault, overload fault, electric leakage and electric contact failure. The occurrence factor of the fire is electric arc or spark accompanied with electrical faults. Residual Current Protective Device (RCD), that is Earth Leakage Circuit Breaker(ELB) and Molded_case Circuit Breaker (MCB), of high sensitivity type used at low voltage wiring cuts off earth leakage and overload, but the RCD can't cut off electric arc or spark to be a major factor of electrical fire. As the RCDs which are applied low voltage distribution panel are prescribed to rated breaking time about 30[ms] (KS C 4613), the RCDs can't perceive to the periodic electric arc or spark of more short wavelength level. To be improved on such problem, this research development is proposed to a auxiliary control apparatus for RCD trip on electric arc or spark due to electrical fire. Some experimental results of the proposed apparatus is confirmed to the validity of the analytical results.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.12
• /
• pp.3490-3499
• /
• 1999

The hyper-geometric distribution software reliability growth model (HGDM) was recently developed and successfully applied to the problem of estimating the number of initial faults residual in a software at the beginning of the test-and-debug phase. Though the HGDM is a time-domain software reliability growth model(SRGM), it is not possible to compare the HGDM with other time-domain SRGMs. Furthermore the usual software reliability can not be computed. These drawbacks are derived from fact that the HGDM is not described in terms of the execution time. Thus we develop a continuous-time HGDM with binomial sensitivity factor in order to remove these drawbacks. Statistical characteristics of the suggested model are studied and its applicability is then examined by analyzing real test data sets. It is empirically shown that the continuous-time HGDM with binomial sensitivity factor can be used as an alternative to the current HGDM.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.2
• /
• pp.141-151
• /
• 2013

In this paper, lateral-torsional buckling(LTB) strength of HSB800 steel plate girder under uniform bending moment was estimated by the nonlinear analysis. Doubly symmetric sections with slender, noncompact and compact webs were considered and the LTB strength in the inelastic range was estimated by taking initial imperfection and residual stress into account. For the numerical analysis, single-panel model and three-panel model were considered and analysis of SM490 steel plate girder was performed to judge the validity of the constructed models by comparing the results with AASHTO, AISC, Eurocode and KHBDC(LSD) codes. By using the same models, LTB strength of HSB800 girder was evaluated and it was acknowledged that the current codes can be applied to HSB800 girders with doubly symmetric section in the inelastic LTB range.