• Journal of Climate Change Research
• /
• v.8 no.1
• /
• pp.51-56
• /
• 2017

The objective of the research project is to develop the hybrid deodorizer for the removal of residual harmful gases generating during pretreatment process of biogas. This hybrid deodorizer is capable of treating harmful gases that contains hydrogen sulfide ($H_2S$), ammonia ($NH_3$) and other odor substances. This hybrid deodorizer reduced the hydrogen sulfide content from approximately 150~200 ppm to less than 16 ppm. These residual harmful gases were effectively removed in the effluent, achieving up to 97% removal of $H_2S$ and 94% removal of $NH_3$ after treatment using hybrid deodorizer.

• Journal of the Korean Mathematical Society
• /
• v.52 no.3
• /
• pp.503-522
• /
• 2015

In this paper, we consider the problem of testing for a parameter change in nonlinear time series models with GARCH type errors. We introduce two types of cumulative sum (CUSUM) tests: estimates-based and residual-based tests. It is shown that under regularity conditions, their limiting null distributions are the sup of independent Brownian bridges. A simulation study is conducted for illustration.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2183-2187
• /
• 2005

In this paper we propose a new fault detection and isolation (FDI) method for those faults of parameter change type. First, we design a residual generator based on the ${\delta}$-operator model of the plant by using the stable pseudo inverse system. Second, the parameter change is estimated by using the property of the block Hankel operator. Third, reliability with respect to stability is quantified. Fourth, the limitations for the meaningful diagnosis in our method are given. The numerical examples demonstrate the effectiveness of the proposed method.

• Review of Korea Contents Association
• /
• v.14 no.3
• /
• pp.37-42
• /
• 2016

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.1
• /
• pp.59-67
• /
• 2014

In 1995 Kimchi refrigerator was developed at first, and has used HFC-134a as refrigerant. Kimchi refrigerator has been made 1,044,694 on the basis of 2010, disposed about 160,000 per year. Although mobile air conditioning, commercial refrigerator, general refrigerator is regarded as a major source of HFC-134a, little information is available for its emission characteristics of HFC-134a. This paper addresses the fugitive emission factors of Kimchi refrigerator at use-phase and disposal-phase. The residual quantities of Korean-made fifty three waste Kimchi refrigerators were weighed using a commercial recover of refrigerants to determine the emission factors at the disposal-phase. On the other hand, the emission factors at use-phase were estimated from the residual quantities and operating times. The average residual rate of forty three scarp Kimchi refrigerators is determined to be $74.6{\pm}5.2%$. The emission factor at the use-phase is estimated to be $3.5{\pm}0.8%/yr$ as a result of using average age of 11.7 years and the average residual rate determined here. The emission factor at the disposal-phase is determined to be 31.3% after adopting 58% of the recycling rate of refrigerant reported by Recycling Center. We estimate 3.1 g/yr for the average emission quantity of HFC-134a per operating refrigerator, while 22.5 g for that per waste Kimchi refrigerator. Since the chemical compositions of refrigerant of waste Kimchi refrigerator were the same as those of new refrigerant, it is expected that the HFC-134a recovered from waste Kimchi refrigerator can be reused for refrigerant.

• Geotechnical Engineering
• /
• v.13 no.5
• /
• pp.155-168
• /
• 1997

The phenomena of detachment and movement of One particles are one of the important mechanisms both in geotechnical and geoenvironmental engineering. In geoenvironmental engineering, in particular, movement of fine particles may facilitate the transport of contaminants since the particle surfaces absorb contaminants before movement. Weathered granitic residual soils, which are the most abundant in Korea. contain large quantities of fine particles up to 50%. The characteristics of fine particle movement of weathered granitic residual soils are investigated in this paper. Samples are obtained from Poiiong, Shinnaedong in Seoul and Andong in Kyungpook : each of the samples represents typical residual soil types in Korea. Laboratory experiments for the three adopted soil types are performed. It is found that effluent concentration of the samples is influenced by porosity, fine particle percentage and particle size distribution. The critical velocity decreases as the fine particle percentage increases and the rate of change of erosion rate increases as the porosity increases. And well-graded samples showed less effluent concentrations compared to poorly-graded samples. The governing equation on the physical mechanism of fine particle movement and its nomerical solution scheme are suggested on the basis of the test results.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.9
• /
• pp.5-14
• /
• 2010

This study was aimed to suggest reliable information of shear strength characteristics due to change of saturation in the landfills or slopes during rainfall infiltration. According to the Mohr-Coulomb failure criteria, the characteristics of shear strength due to change of saturation were analyzed for the weathered residual soils which were sampled in the road construction site of Daejeon city. From the direct shear strength tests, the cohesions and the shear resistance angles were showed maximum values in the condition of optimum moisture content, and then decreased in the condition of wet side compaction. In this study, the cohesions were decreased more than 50% according to increasing saturation by infiltration for the compaction soils. But the reductions of the shear resistance angles were about $1{\sim}2^{\circ}$ which was small value, and thus the changes of the saturation were not nearly influenced the shear resistance angle. The influences of the saturation were seemed to very small for the residual strength parameters according to Mohr-Coulomb failure criteria.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.809-815
• /
• 2014

The induction heating bending process, which has been recently applied to nuclear piping, can generate residual stresses due to thermomechanical mechanism during the process. This residual stress is one of the crack driving forces that have important effects on crack initiation and propagation. However, previous studies have focused only on geometric shape variations such as the change in thickness and ovality. Moreover, very few studies are available on the effects of process variables on residual stresses. This study investigated the effects of process variables on the residual stress distributions of induction heating bended austenitic stainless steel (316 series) piping using parametric finite element analysis. The results indicated that the heat generation rate and feed velocity have significant effects on the residual stresses whereas the moment and bending angle have insignificant effects.

• The Korean Journal of Physiology
• /
• v.17 no.2
• /
• pp.177-182
• /
• 1983

In order to clarify the effect of the unilateral pneumonectomy on the compensatory growth of the residual lung, liver and kidney, and serum electrophoresis pattern, right lung pneumonectomy was performed on rabbits under general anesthesia with pentobarbital sodium. On the fifth day after the surgery, the weight of the residual lung, liver and bilateral kidneys was measured and organ weight-body weight ratio was calculated. And in an attempt to know whether the cells in the liver and the kidney were proliferated by unilateral pneumonectomy, DNA content was determined. The quantity(g/100 ml) of serum protein was determined also and serum electrophoresis was performed on cellulose acetate membrane. The results obtained are summarized as following. The weight of the residual lung and lung weight-body weight ratio was significantly increased respectively. The weight of the liver and organ weight-body weight ratio were not changed but the DNA content of the liver and kidney tissue increased significantly, illustrating that unilateral pneumonectomy caused cellular hyperplasia in the liver and in the kidney as well as in the residual lung. The quantity(g/100 ml) of serum protein was significantly increased and in the analysis of the electrophoregram, there was significant difference between the normal and pneumonectomy group. Taken together, these results indicate that unilateral pneumonectomy caused the compensatory hyperplasia of the liver, the kidney and the residual lung as well as the change of electro-phoretic pattern. And it also suggests that a humoral factor, which proliferates the cells in the residual lung, the liver and the kidney, existed in the pneumonectomized rabbits.

• Journal of Plant Biology
• /
• v.35 no.3
• /
• pp.273-281
• /
• 1992

The origin of the interfascicular cambium from residual meristem can be elucidated by tangential and transverse observation. It is clear that there is structural distinction between interprocambial and interfascicular residual meristem and adjacent parenchyma in both the transverse and tangential view. Consequently, the residual meristem does not convert into parenchyma but, rather, becomes interfascicular cambium. In tangential view, the homogeneous structure of interfascicular residual meristem at an early stage changes gradually into a heterogeneous one at a later stage, with long and short cells from which fusiform and ray initials originate respectively. However, the homogeneous structure of parenchyma adjacent interfascicular residual meristem does not change into a heterogeneous one but remains the same at all stages of development. Therefore, the interfascicular cambium has a direct ontogenetic continuity with the residual meristem, and does not have its secondary origin from differentiated parenchyma. Furthermore, the ontogenetic pattern of the interfascicular cambium is almost the same as that of fascicular cambium.ambium.