• Korean Journal of Veterinary Service
• /
• v.18 no.3
• /
• pp.13-28
• /
• 1995

This study was carried out to explore the most sensitive and useful method for simultaneous determination of five sulfa drugs(sulfamethazine, sulfamerazine, sulfamonomethoxine, sulfadimethoxine, sulfaquinoxaline) in livestock productions(pork muscle, bovine muscle, chicken muscle, milk ) by HPLC with UV detector and reverse phase column. The results obtained were as follows：1. For mobile phase acetonitrile-0.01M ammonium acetate (23：77) showed more applicable sensitivity and retention times than acetonitrile-1% acetic acid(23：77). Thus acetonitrile-0.01M ammonium acetate(23：77) selected and applied to the modification test, from which it was found pH 6.75 was the most adequate. 2. Optimal wavelength of UV for SMT(sulfamethazine), SMR(sulfamerazine), SMM(sulfamonomethoxine), SD(sulfadimethoxine), and SQ(sulfaquinoxaline) were 266, 266, 265, 269 and 250nm, respectively, and that for simultaneous application it was 263nm. 3. The average recovery rate by extractant(chloroform, dichloromethane, chlorform+dich-loromethane) in the classic method was not significantly different(p>0.05) but that by chloroform higher than the others. Thus chloroform was found to be adequate as extractant in this classic method. 4. The average recovery rate was 86.5% by the MSPD(matrix solid phase disperse) method, which was significantly higher than that by the classic method(p<0.05). Also the recovery rates by method were significantly different(p<0.05) in accordance with sample and type of drug. The MSPD method was much superior to classic method on clean-up.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.481-501
• /
• 2007

Excessive rainfalls due to climatic changes can trigger an increase in rainfall-induced slope failures that pose real threats to both lives and properties. Many high slopes in residual soils could stand at a steep angle, but failed during or after rainfall. Commonly, these slopes have a deep groundwater table and negative pore-water pressures in the unsaturated zone above the groundwater table contribute to the shear strength of soil and consequently to factor of safety of the slope. Stability assessment of slope under rainfall requires information on rate of rainwater infiltration in the unsaturated zone and the resulting changes in pore-water pressure and shear strength of soil. This paper describes the application of unsaturated soil mechanics principles and theories in the assessment of rainfall effect on stability of slope through proper characterization of soil properties, measurement of negative pore-water pressures, seepage and slope stability analyses involving unsaturated and saturated soils. Factors controlling the rate of changes in factor of safety during rainfall and a preventive method to minimize infiltration are highlighted in this paper.

• Journal of Industrial Technology
• /
• v.35
• /
• pp.3-8
• /
• 2015

A study has been made on defects which are formed in manufacturing processes of engine bearing and also on fatigue crack growth behavior in each step of bearing metal manufacturing. After the first step(sinter brass powder on steel plate ; Series A) many voids are made on brass surface and its size is decreased by the second step(rolling process of sintered plate ; Series B). After the third step(re-sintering step of brass powder and rolling ; Series C) the number of voids is decreased and its type shows line. The time of fatigue crack initiation and the growth rate of fatigue crack are in order of Series A, Series B, Series C. These reasons are that void fosters the crack initiation and growth, and residual stress made by rolling process effects on the crack growth rate in Series B, C. In forming and machining processes by use of final bearing metal, crack was observed at internal corner of flange and peeling off was observed at junction between steel and brass. Owing to the above crack and peeling off, it is considered that there is a possibility of fatigue fracture during the application time.

• Journal of Industrial Technology
• /
• v.31 no.A
• /
• pp.45-51
• /
• 2011

A study has been made on defects which are formed in manufacturing processes of engine bearing and also on fatigue crack growth behavior in each step of bearing metal manufacturing. After the first step (sinter brass powder on steel plate ; Series A) many voids are made on brass surface and its size is decreased at the second step (rolling process of sintered plate ; Series B). After the third step (re-sintering step of brass powder and rolling ; Series C) the number of voids is decreased and its type shows line. The time of fatigue crack initiation and the growth rate of fatigue crack are in order of Series A, Series B, Series C. These reasons are that void fosters the crack initiation and growth, and residual stress made by rolling process affects on the crack growth rate in Series B, C. In forming and machining processes by use of final bearing metal, crack was observed at internal corner of flange and peeling off was observed at interface between steel and brass. Owing to the above crack and peeling off, it is considered that there is a possibility of fatigue fracture during the application time.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.4
• /
• pp.111-116
• /
• 2001

As part of the recycling methods, residual food through the anaerobic fermentation process was decomposed into methane gas and fermentation liquid. The research was conducted to measure the effect of application of fermentation liquid on chemical properties of soil and plant growth according to application rate and separate manure at the base of nitrogen in fermentation liquid. The fermentation liquid contained 0.52% nitrogen was applied in treatments by standard fertilizer. The treatments were composed of the control only with chemical fertilizer and N-50, N-100-4, N-100-8 were each of applied with 50, 100(6 times), 100(3 times)% of fermentation liquid contrast to standard fertilizer. Properties of fermentation liquid was high EC because of waster soluble organic compounds as well as much of salts and also contained a lot of suspended solid. The changes of soil chemical properties little occurred in before and after of experiment but EC and content of ex. Ca in soil were increased. Fresh weigh in treatments applied with fermentation is high than that of control but the difference between treatments little showed. The above result means if fermentation liquid be used instead of chemical fertilizer the volume of used fermentation liquid will be reduced by 50% of present standard fertilizer.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.4
• /
• pp.373-379
• /
• 1998

Fly ash application with a rate 0, 50, 100, $150Mg\;ha^{-1}$ in clay loam paddy, which had properties of pH 5.3 and low contents of silicate, gave a positively residual effects on the growth of rice crop subsequent to malting barley. The responses of rice yields to fly ash application were in the order of bituminous coal fly ash(BCFA) 100 > 150 > 50 > anthracite fly ash(AFA) 50 > 100 > none > AFA $150Mg\;ha^{-1}$. As a result, yields responses of milled rice were ranged from $6.2(50Mg\;ha^{-1}){\sim}14.4%(100Mg\;ha^{-1})$ by BCFA and from $-0.6(150Mg\;ha^{-1}){\sim}6.6%(50Mg\;ha^{-1})$ by AFA showing maximum yields of 5.084 and $4.738Mg\;ha^{-1}$ by the former and the latter, respectively. Rice plant showed lodging indices ranging from $20(50Mg\;ha^{-1}){\sim}40%(150Mg\;ha^{-1})$ by BCFA and from $1.3(150Mg\;ha^{-1}){\sim}15%(50Mg\;ha^{-1})$ by AFA at harvesting stage. In especial, soils applicated with BCFA contained a good fertility in terms of pH, available $P_2O_5$ and $SiO_2$, and exchangeable Ca and Mg etc. so that possibly harbored 3yr-residual effects of the fly ash on crop subsequent to this rice.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.3
• /
• pp.281-288
• /
• 2009

The strobilurin fungicides, azoxystrobin and kresoxim-methyl, were investigated to know the biological half-lives and dissipation patterns in Korean melon under plastic film house condition. Used pesticides for field application were 20% azoxystrobin of suspension concentrate and 47% kresoxim-methyl of water dispersible granule. Two pesticides were sprayed at recommended and double dose rate. Pesticide residues in Korean melon were analyzed until 14 days after application. The azoxystrobin was analyzed by HPLC equipped with UV detector after cleanup with florisil glass column. Initial residue concentrations of azoxystrobin in Korean melon at recommended and double dose rate were 0.09 mg/kg and 0.14 mg/kg, respectively. Those were less than 0.2 mg/kg maximum residue limit of Korean melon established by KFDA. The biological half-lives of azoxystrobin in Korean melon were 4.7 days at recommended dose rate and 7.8 days at double dose rate. Initial concentrations of kresoxim-methyl which was analyzed by GLC-ECD in Korean melon at recommended and double dose rate were 0.10 mg/kg and 0.23 mg/kg, respectively. Those were less than 1.0 mg/kg, MRL. The biological half-lives of kresoxim-methyl in Korean melon were 4.1 days at recommended dose rate and 4.8 days at double dose rate. The residue amounts of both pesticide was lower than MRL and biological half-lives were not so long. Because the weight of Korean melon under plastic film house condition was fast increased during cultivation.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.4
• /
• pp.305-311
• /
• 2020

BACKGROUND: The healthy food trend has encouraged the consumption of natural products, including berries. This trend is expected to increase the strawberry consumption. There has been a concern about the exposure of pesticides approved for use on strawberry. In this study, the dissipation patterns of systemic and non-systemic pesticides were evaluated in strawberry under plastic-covered greenhouse conditions. METHODS AND RESULTS: Cyflumetofen and dimethomorph were applied on strawberry in the critical GAP (Good Agricultural Practices). Strawberries were harvested at 0, 1, 2, 3, 5, 7 and 10 days after final application of the pesticides. The analyses of the residual pesticides were performed by HPLC-DAD with C18 column. The limits of quantitation (LOQ) of cyflumetofen and dimethomorph were 0.04 and 0.02 mg/kg, respectively. The recovery of cyflumetofen and dimethomorph were 88.1 ~ 103.3% and 79.0 ~ 110.2% for the spiked two levels (LOQ and 10LOQ), respectively. The biological half-lives of cyflumetofen and dimethomorph werer 7.5 and 8.9 days, respectively. The dissipation rates in strawberry were calculated by the statistics method at a 95% confidence level. The distribution showed that pesticides with low log Pow were indicated by the decreased dissipation rate and pesticides with similar log Pow and low solubility also showed the decreased dissipation rate. CONCLUSION: The residues of cyflumetofen and dimethomorph in strawberry at time 0 after the final application were below the established MRL in Korea. The dissipation behavior of systemic and non-systemic pesticides in strawberry is affected by their log Pow and water solubility values.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.3
• /
• pp.184-192
• /
• 2017

BACKGROUND: This study was performed to evaluate the residue dissipation of boscalid and spinetoram on crown daisy and sweet pepper affected by the morphology of the crop. The half-lives and dissipation rate constants for boscalid and spinetoram on crown daisy and sweet pepper were calculated. And then lower limit of 95% confidence interval for dissipation rate constant could be used to propose the pre-harvest residue limit. METHODS AND RESULTS: The pesticide products diluted according to the pesticide label were applied one time on crown daisy and sweet pepper at 2 field sites, respectively. Initial concentration of boscalid and spinetoram on crown daisy after application were in the range of 72.80~117.15 mg/kg and 2.82~4.67 mg/kg, respectively. And Initial concentration of boscalid and spinetoram on sweet pepper were in the range of 1.58~1.62 mg/kg and 0.10~0.21 mg/kg, respectively. Boscalid and spinetoram for crown daisy dissipted below the maximum residue limit(MRL) at 10 and 2 days after application, respectively. All residues concentration of boscalid and spinetoram for sweet pepper below the MRL at 0 day after application. The half-lives based on dissipation rate constant for boscalid and spinetoram on crown daisy were 4.2~4.9 days and 3.0~2.4 days respectively. And the half-lives for boscalid and spinetoram on sweet pepper were 6.7~7.0 days and 2.8~4.0 days respectively. CONCLUSION: The difference in initial concentration of boscalid and spinetoram among crop commodities were due to different crop morphology with larger surface areas. This study was suggested that pre-harvest residue limit would be calculated from lower limit of 95% confidence interval for dissipation rate constant and would be useful to protect consumers by controlling the pesticide residues in crop.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.143-150
• /
• 1998

In order to evaluate the nitrogen (N) balance, from the different application methods and levels of $^{15}N$ applied to a satsuma mandarin orchard soils in spring, we surface-applied N as urea at the rates of 50 (water-dissolved), 100 (solid and water-dissolved) and 150% (solid) of the recommended rate ($180kg\;ha^{-1}$) in spring (lebeled N), summer (nonlebeled N) with application ratio of 5:2:3. Fruit yield and quality were not significantly affected by any treatment. Nitrogen contents of spring flush leaves in late August were 3.0% regardless of the treatments. The N recovery by parts of tree itself was in the order of leaves, fruits, roots, stems, and the highest recovery per tree was 22.3% in the 50% recommended water-dissolved surface broadcast while there were not much differences for N recovery (11.9 to 13.6%) among the other three treatments. Total N content in top 30cm of soils was 0.47% regardless of the treatments, but N proportion and total residual N from the fertilizer applied increased with increasing N rate while the N recovery in soils decreased. For the recommended N rate, N proportion and the residual N from the fertilizer applied were greater in the water-dissolved surface broadcast than those in soils surface broadcast. The highest total (tree + soils) N recovery was 70.9% in the 50% recommended water-dissolved surface broadcast, but tended to decrease to 52.2, 46.6, and 43.2% for the recommended water-dissolved surface broadcast, 100 and 150% of the recommended solid surface broadcast, respectively.