• Journal of Nutrition and Health
• /
• 제45권4호
• /
• pp.390-399
• /
• 2012

The objective of this study was to develop and evaluate the construct validity of a Nutrition Quotient (NQ) for children. In a previous report (Kang, et al., 2012), the food behavior checklist for children's NQ, consisting of 19 items, was grouped into a 5-factor structure according to the exploratory factor analysis: balance, diversity, moderation, regularity, and practice. In this study, the construct validity of the NQ was assessed using a confirmatory factor analysis. Elementary school students (n = 1,393) from six large cities completed the NQ test. Indicator tests suggested an adequate model fit (goodness of fit index = 0.9613; adjusted GFI = 0.95; standardized root mean square residual = 0.0464; chi-square test statistics of < 0.001 p-value, 82.1), and item loadings were significant for all subscales (p < 0.05). The standardized path coefficients were used as the weights of the items. The NQ and the 5 factor scores of the student were calculated by the obtained weights of the questionnaire items. Logistic regression was applied to find the significant factors in order to affect a specific nutrient status. The receiver operation characteristic curve analyses were performed in order to find diagnostic cut-off points of the five factors. The food behavior checklist for children's NQ would be a handy and suitable instrument for evaluating dietary behaviors of Korean children.

• 한국토양비료학회지
• /
• 제49권4호
• /
• pp.327-334
• /
• 2016

In order to compare phosphorus (P) behavior of livestock manure compost (LMC) and chemical fertilizer (CF) applied to the sea-reclaimed land soils, incubation experiments were conducted for five weeks. Four soils differing textural classes, sandy loam and clay loam, and electric conductivity (EC) value, high and low, were applied with CF and LMC. LMC was applied at the level of 0, 1, 2, and 3% on the soil weight basis and CF was applied at the same levels of P as LMC. The results showed that increase of P application rate of CF and LMC led to linearly increase available $P_2O_5$ and $0.01M\;CaCl_2$ extractable P contents regardless of soil texture and EC. However, 0.01M $CaCl_2$ extractable P from soil applied with CF was significantly higher than with LMC. Correlation analysis between $0.01M-CaCl_2$ extractable P and fractionated P by different extraction methods showed that $0.01M-CaCl_2$ extractable P positively correlated with KCl-P (soluble and exchangeable P) and HCl-P (Ca and Mg bound P). However, NaOH-P (Fe and Al bound P and organic P) and residual P was adverse. The amount of NaOH-P significantly influenced to the amount of 0.01M $CaCl_2$ extractable P of CF and LMC in the soils. The application of LMC at sandy loam soil could be carried out in the consideration of nutrient leaching and crop uptake.

• 한국재료학회지
• /
• 제11권8호
• /
• pp.703-707
• /
• 2001

크롬의 첨가에 따른 Raney 니켈의 특성을 파악하여 우수한 성능을 나타낼 수 있는 알칼리형 연료전지용 수소극의 촉매를 제조하였다. 또한 제조된 촉매를 이용, 실제 전극으로 제작하여 전류밀도를 측정한 뒤 최적의 전극재료의 제조조건을 확립하였다. 먼저 Ni-Al합금 제조시 크롬의 첨가량을 달리하여 Raney 니켈을 제조한 뒤 이를 이용하여 수소극을 제작, 전기화학적 특성을 고찰한 결과 크롬 첨가량이 증가함에 따라 mass activity도 증가하여 크롬 첨가량이 1 wt% 인 경우 최고 3.688 A/g을 나타내었다. 전기화학적 측정시 half cell의 운전온도는 8$0^{\circ}C$이었으며 전해질은 6N KOH이었다. Raney 니켈 촉매의 입자크기와 비표면 적을 조사한 결과 크롬의 첨가량이 증가함에 따라 Raney 니켈 촉매의 입자크기는 12.11 $\mu\textrm{m}$에서 크롬의 첨가량이 1.25 wt%인 경우 11.07 $\mu\textrm{m}$로 감소하였고 비표면적은 0.653 $\m^2$/g에서 0.685 $\m^2$로 중가함을 알 수 있었다. 평균입자 크기가 커짐에 따라 잔존 알루미늄의 함량은 증가함을 알 수 있었다.

• International Journal of Concrete Structures and Materials
• /
• 제9권3호
• /
• pp.381-390
• /
• 2015

Investigating the microstructure of hardened cement mixtures with the aid of advanced technology will help the concrete industry to develop appropriate binders for durable building materials. In this paper, morphological, mineralogical and thermogravimetric analyses of autoclave-cured mixtures incorporating ground dune sand and ground granulated blast furnace slag as partial cementing materials were investigated. The microstructure analyses of hydrated products were conducted using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), differential thermal analysis (DTA), thermo-graphic analysis (TGA) and X-ray diffraction (XRD). The SEM and EDX results demonstrated the formation of thin plate-like calcium silicate hydrate plates and a compacted microstructure. The DTA and TGA analyses revealed that the calcium hydroxide generated from the hydration binder materials was consumed during the secondary pozzolanic reaction. Residual crystalline silica was observed from the XRD analysis of all of the blended mixtures, indicating the presence of excess silica. A good correlation was observed between the compressive strength of the blended mixtures and the CaO/$SiO_2$ ratio of the binder materials.

• 한국버섯학회지
• /
• 제10권1호
• /
• pp.44-48
• /
• 2012

본 연구에서는 배양된 액체종균의 세균 오염 여부를 Giemsa 용액의 단일 염색으로 짧은 시간 안에 정확하게 판정이 가능한지를 조사하였다. Giemsa 용액은 혈액 골수 림프절 말라리아 원충 리케차 세포 등을 염색하는 것으로, 염기성 색소인 methylene azul과 methylene blue, 그리고 산성색소인 eosine을 methyl alcohol-glycerine에 녹여서 제조하였다. 그리고 팽이 액체종균의 폭기 배양액 분취하여 슬라이드에 올리고 Gimesa 용액으로 염색한 후 광학 현미경으로 검사하였다. 이 결과 40~60초 동안의 세균세포를 (팽나무)버섯(류) 균사세포의 부스러기나 잔존 대두박 등과 구별할 수 있었다. 이 Gimesa 용액을 이용한 염색 및 검경방법은 빠르고 간편하며 정확하므로 액체종균을 사용하는 버섯재배 농가에서도 세균 오염을 효과적으로 동정(감지)하는데 이용할 수 있다고 생각한다.

• 약학회지
• /
• 제21권4호
• /
• pp.200-210
• /
• 1977

This investigation was undertaken from February 1976 to September 1976. The detergents in municipal sewages from the Chung Kae Stream, Ahn Yang Stream, and Bong Won Stream were determined at 1.5ppm, 0.93ppm, and 3.36ppm in average respectively. The concentrations of detergents determined in the Han river were 0.013ppm of Kwang Na Ru, 0.11ppm of Duk Do, 0.370ppm of Bo Kwang Dong, and 0.285ppm of Ka Yang Dong basin respectively. And the potable waters of Sung Book Ku and Sung Dong Ku from Ku Eu water pumping station located up-stream of the Han river were less polluted at 0.045ppm and 0.037ppm in average. Young Deung Po Ku and Su Dae Moon Ku had been relatively polluted at 0.181ppm and 0.133ppm. The coagulant, alum [$Al_{2}(SO_{4})_{3}$] could eliminated the small amount of detergent by coagulation. The eliminated rates were about 13% by 5ppm and 22.7% by 20ppm of aluminum sulfate in sewage contained 10ppm of turbidity. The sand and the charcoal adsorbed some detergent as the following Langmuir's equations: For the charcoal, m/x=0.029.$\times$1/Ce-11.43 For the charcoal, m/x=2.705log1/Ce-5.46 Where m: amount of snad and active carbon used(g) x: amount of detergent adsorbed from liquid(g) Ce:concentration in the liquid at equilibrium(miles) The adsorption effect of sand would be neglected. In the low concentration of detergent solution, one gram of active carbon adsorbed 0.263g of detergent. It was determined that one gram of chlorine reduced 5.5g pf DBS om keeping up 0.2ppm of residual chlorine by disinfection process with chlorine compound.

• 자원환경지질
• /
• 제30권2호
• /
• pp.89-103
• /
• 1997

The purpose of this research is to investigate the enrichment and distribution patterns of naturally occurring potentially toxic elements in soils derived from black shales and slates. Soil samples were collected from the Chubu area covered with uranium-enriched black shales and slates of the Changri Formation of the Okchon Super Group, and analysed for multiple-elements using INAA, ICP-AES and AAS. Soil pH and loss-an-ignition were also measured. Trace element contents in black shale and slate of the Chubu area are relatively lower than those in black shales, and higher than those in black slates reported elsewhere (Chon, Jung, 1991; Chon et al., 1996). Soil pH values range from 3.5 to 6.5, and loss-an-ignition values are in the range from 3 to 10%. Potentially toxic elements including As, Ba, Cr, Cu, Mo and U are highly enriched in residual soils with maximum content of $540{\mu}g/g$, $35,000{\mu}g/g$, $280{\mu}g/g$, $300{\mu}g/g$, $240{\mu}g/g$ and $860{\mu}g/g$, respectively. Significant concentrations of those elements were found in soils taken from the Tojangkol, the Chubu tunnel and the Meokti areas. Soils derived from black shales and slates, calcareous and phyllitic rocks, and intrusions were discriminated in terms of As, Ba, Co, Cr, Cu, Mo, Sc and U contents. Enrichment index was calculated using the concentrations of As, Ba, Cr and Mo, and enrichment index map shows very similar trend with U distribution in soils.

• 응용통계연구
• /
• 제30권2호
• /
• pp.259-269
• /
• 2017

분산함수가 불연속점을 가지는 경우, 대부분의 비모수적 함수 추정 연구에서 분산함수가 음수 값을 갖지 않기에 잔차제곱을 이용한 Nadaraya-Watson 추정량인 국소상수항추정량을 이용하였다. 한편, Huh (2014, 2016a)는 Chen 등 (2009)과 Yu와 Jones (2004)의 연구를 바탕으로 불연속 분산함수를 로그 변환한 로그분산함수를 추정 대상으로 삼아 잔차제곱이나 로그잔차제곱으로 경계점 문제를 가지지 않는 국소선형추정량을 이용하여 비모수적으로 추정하였다. Huh (2016b)는 불연속점에서 점프크기추정량을 활용하여 잔차제곱을 분산함수가 연속인 회귀모형에서 얻어진 잔차제곱인 것처럼 수정한 후 이들을 이용하여 불연속 분산함수의 추정을 연구하였다. 본 연구에서는 불연속 로그분산함수의 점프크기추정량을 이용하여 로그잔차제곱을 수정하고 불연속 로그분산함수를 국소선형추정량을 이용하여 추정하고자 한다. 제안된 추정량의 우수성을 모의실험을 통하여 Chen 등 (2009)의 로그분산함수 추정량을 이용한 Huh (2014)의 불연속 로그분산함수 추정량과 비교하고 실제자료에 적용하고자 한다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.84-87
• /
• 2003

Since Pb-free solder alloys have been used extensively in microelectronic packaging industry, the interaction between UBM (Under Bump Metallurgy) and solder is a critical issue because IMC (Intermetallic Compound) at the interface is critical for the adhesion of mechanical and the electrical contact for flip chip bonding. IMC growth must be fast during the reflow process to form stable IMC. Too fast IMC growth, however, is undesirable because it causes the dewetting of UBM and the unstable mechanical stability of thick IMC. UP to now. Ni and Cu are the most popular UBMs because electroplating is lower cost process than thin film deposition in vacuum for Al/Ni(V)/Cu or phased Cr-Cu. The consumption rate and the growth rate of IMC on Ni are lower than those of Cu. In contrast, the wetting of solder bumps on Cu is better than Ni. In addition, the residual stress of Cu is lower than that of Ni. Therefore, the alloy of Cu and Ni could be used as optimum UBM with both advantages of Ni and Cu. In this paper, the interfacial reactions of Sn-3.5Ag-0.7Cu solder on Ni-xCu alloy UBMs were investigated. The UBMs of Ni-Cu alloy were made on Si wafer. Thin Cr film and Cu film were used as adhesion layer and electroplating seed layer, respectively. And then, the solderable layer, Ni-Cu alloy, was deposited on the seed layer by electroplating. The UBM consumption rate and intermetallic growth on Ni-Cu alloy were studied as a function of time and Cu contents. And the IMCs between solder and UBM were analyzed with SEM, EDS, and TEM.

• 한국전산유체공학회지
• /
• 제10권2호
• /
• pp.38-47
• /
• 2005

Substructuring methods are often used in finite element structural analyses. In this study a multi-level substructuring(MLSS) algorithm is developed and proposed as a possible candidate for finite element fluid solvers. The present algorithm consists of four stages such as a gathering, a condensing, a solving and a scattering stage. At each level, a predetermined number of elements are gathered and condensed to form an element of higher level. At the highest level, each sub-domain consists of only one super-element. Thus, the inversion process of a stiffness matrix associated with internal degrees of freedom of each sub-domain has been replaced by a sequential static condensation of gathered element matrices. The global algebraic system arising from the assembly of each sub-domain matrices is solved using a well-known iterative solver such as the conjugare gradient(CG) or the conjugate gradient squared(CGS) method. A time comparison with CG has been performed on a 2-D Poisson problem. With one domain the computing time by MLSS is comparable with that by CG up to about 260,000 d.o.f. For 263,169 d.o.f using 8 x 8 sub-domains, the time by MLSS is reduced to a value less than $30\%$ of that by CG. The lid-driven cavity problem has been solved for Re = 3200 using the element interpolation degree(Deg.) up to cubic. in this case, preconditioning techniques usually accompanied by iterative solvers are not needed. Finite element formulation for the incompressible flow has been stabilized by a modified residual procedure proposed by Ilinca et al.[9].