• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.413-416
• /
• 2006

This paper presents a strategic approach to effective soil conservation planning and management. To do this, the soil loss model, Revised Universal Soil Loss Equation (RUSLE) was used to quantify soil erosion in two basins (Andong and Imha basin), which are distinct in terms of sedimentation in the reservoir of each basin. Areas with high soil erosion potential were analyzed on the basis of land surface characteristics handled by geographic information system (GIS), especially dividing the basin into several sub-basins and then examination was emphasized near the river channel (water-pollutant buffering zone), along which human activities are large. Modeling results show the approach suggested herein provides a basis and guideline for choosing prior erosion risk areas to be examined for soil conservation planning and management. Also, this approach is relatively simple and has wide practical applicability.

• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.109-114
• /
• 2001

Photovoltaic systems normally use a maximum power point tracking (MPPT) technique to continuously deliver the highest possible power to the load when variations in the insolation and temperature occur. A simple method of tracking the maximum power points (MPPs) and forcing the boost converter system to operate close to these points is presented through deriving small-signal model and transfer function of boost converter. This paper aims at modeling boost converter including equivalent series resistance of input reservoir capacitor by state-space-averaging method. In the future, properly designed controller for compensation will be constructed for maximum photovoltaic power tracking control.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.160-163
• /
• 2000

Due to the complexities of the real-world system, a water resource management program has to deal with various types of data. It appears that management personnel who has to use the program usually suffers from the technical burdens of handling large amount of data and understanding the optimization theory when they try to interpret the results. By combining the capabilities of database technology and modeling technique with optimization procedure we can develop a reliable decision supporting tool for multi-reservoir operation planning, which yields operating schedule for each dam in a river basin. We introduce two special data handling methodology for the real world application. First, by treating dams, hydro-electric power generating facilities and demand sites as separate database tables, the proposed data handling scheme can be applied to general water resource system in Korea. Second, by assigning variable names using predetermined key words, we can save searching time for identifying the moaning of the variables, so that we can quickly save the results of the optimization run to the database.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.3
• /
• pp.136-145
• /
• 2002

Monitoring data from agricultural reservoirs throughout the country were analyzed to evaluate the limiting factor fur algal growth and relationships between Chl-a, total phosphorus (TP), and total nitrogen (TN). Total 394 reservoirs ranging from below 500 ㎥ to over 50 million ㎥ in storage volume were monitored from 1990 to 2000 with respect to TP, W, Chl-a, and their annual mean values were used fur the analysis. Based on N/P ratio, the dominant limiting factor for algal growth was turned out to be phosphorus in agricultural reservoirs (about 83%). Therefore, the proper managements of phosphorus in the agricultural watershed appear to be crucial to prevent excessive on algal growth. The effects of phosphorus and nitrogen ware most eminent during the summer period. And the effect of nutrients on the algal biomass (Chl-a) development appeared to be greater in smaller the reservoirs than in larger ones. Generally, Chl-a and TP demonstrated a close relationship while that of Chl-a and TN showed less correlationship. Chl-a and chemical oxygen demand (COD) also showed a good relationship. Beth ratios of Chl-a / TP and Chl-a / COD relationships were within the range of literature values. Quantitative analysis of TP and COD is relatively convenient compared to that of Chl-a, and the relationship between TP and COD and Chl-a from this study could be used beneficially for water quality management of agricultural reservoirs and related water quality modeling.

• Journal of Korean Society on Water Environment
• /
• v.28 no.2
• /
• pp.178-184
• /
• 2012

BOD decay rate is a key parameter of BOD-DO models in streams and lakes. In the calibration of water quality modeling appropriate range of coefficient is required for guidance of parameter selection. In this study BOD decay rate was measured at 48 stream sites and 10 reservoir sites in 8 different river systems. The decay rate ranged from 0.09 to 0.25 $day^{-1}$ with a mean of 0.16 $day^{-1}$. Among river systems the decay rates showed significantly different ranges, with the Han River system showing higher values than other river systems. In comparing different types of water bodies, the decay rate was slightly higher in tributaries than in reservoirs and mainstreams. Our results can provide guidance to the selection of proper coefficient for various water bodies in the calibration of water quality models.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.379-383
• /
• 2008

본 연구의 목적은 3차원 수리 모델인 ELCOM(Estuary, Lake and Coastal Ocean Model)과 물질 전달모델인 CAEDYM(Computational Aquatic Ecosystem Dynamic Model)을 이용하여 성층화된 저수지로 밀도류 형태로 유입한 부유사의 이송과 확산 그리고 침강특성을 해석하는데 있다. ELCOM은 3차원 수리동력학 모델로써 시공간적인 유속과 수온변화를 예측하는데 사용되었으며, CAEDYM과 매 계산시간 마다 동적으로 연결(Dynamic coupling)되어 부유입자의 이송, 확산, 침강 과정을 모의하였다. 개발된 3차원 모델의 예측 성능은 2004년 홍수기 동안 대청호에서 실측한 자료를 사용하여 검증하였다. 모델의 모의변수는 입자크기별로 구분된 부유물질(SS) 그룹이며, 현장 실측자료인 탁도($C_T$)와 모델 변수인 SS간의 변환을 위해 저수지 지점 별로 측정한 SS-$C_T$ 상관관계를 사용함으로써 부유 입자의 크기분포의 공간적 변동 특성을 반영하였다. 모델은 탁수가 유입하는 환경에서 저수지 성층구조의 변화와 유입 탁수의 밀도류 거동특성, 유입한 부유사의 이송과 확산 그리고 침강특성을 비교적 잘 모의하였다. 저수지로 유입한 부유입자 중 입경이 $20{\mu}m$ 이상인 입자는 매우 빠른 속도로 저수지 바닥에 퇴적된 반면, $10{\mu}m$ 이하의 입자들은 중층에 오랜 시간 부유하며 장기탁수문제를 유발하는 원인이 되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.888-892
• /
• 2008

저수지의 퇴사는 저수량을 감소시켜 수명을 단축시키고 저수피해를 가중시킴과 동시에 용수공급에도 지장을 초래하게 된다. 또한 자연하천에서 흐르던 유사는 댐이라는 수공구조물로 인해 흐름에 방해를 받으며, 홍수기 홍수조절을 위한 방류시 하류 하천의 하상변동에 영향을 미치게 된다. 100년을 내용수명으로 하는 다목적댐은 한번 건설되면 저수상태에서 장기간 유지관리를 필요로 하므로 저수지내 퇴사에 대한 예측은 설계 단계에서 부터 신중한 검토와 적용이 요구된다. 저수지내에서 유사의 퇴적으로 인한 하상변동은 유역내에서 유입되는 유사입자의 크기와 형상, 하천의 계절적 유량변화와 유사량 변화, 저수지의 형태와 크기, 그리고 저수지의 홍수기 방류량과 운영계획 등 상호 관련된 많은 요소에 의해 좌우된다. 따라서 합리적이고 효율적인 하천 및 저수지의 정비와 관리를 위해서는 적절한 수치모형을 이용한 저수지의 퇴사분포 예측과 퇴사량 예측이 필요하다. 본 연구에서는 홍수기간 저수지로 유입되는 홍수량을 대상으로 퇴사거동에 대한 변화를 알아보기 위해 2차원 수치모형인 SMS(Surface-Water Modeling System) 모형을 사용하였으며, 모형내에 내장되어 있는 RMA-2와 SED-2D에 대한 모형의 특성 사용법 입력자료를 분석하고 대상유역에 대한 기 조사된 하천 종 횡단 자료를 토대로 지형자료를 작성하여 기본계획 단계에 있는 김천시 부항다목적댐을 대상으로 100년 빈도 홍수량 유입시 공간적 퇴사거동 현상을 모의하였으며, 유속분포 퇴사의 공간적범위를 고려하여 저수지내 구조물 위치 선정 등에 미치는 영향을 연구하였다.

• Journal of Mechanical Science and Technology
• /
• v.19 no.2
• /
• pp.520-528
• /
• 2005

In this study, a new mathematical dynamic model of displacement sensitive shock absorber (DSSA) is proposed to predict the dynamic characteristics of automotive shock absorber. The performance of shock absorber is directly related to the vehicle behaviors and performance, both for handling and ride comfort. The proposed model of the DSSA has two modes of damping force (i.e. soft and hard) according to the position of piston. In this paper, the performance of the DSSA is analyzed by considering the transient zone for more exact dynamic characteristics. For the mathematical modeling of DSSA, flow continuity equations at the compression and rebound chamber are formulated. And the flow equations at the compression and rebound stroke are formulated, respectively. Also, the flow analysis at the reservoir chamber is carried out. Accordingly, the damping force of the shock absorber is determined by the forces acting on the both side of piston. The analytic result of damping force characteristics are compared with the experimental results to prove the effectiveness. Especially, the effects of displacement sensitive orifice area and the effects of displacement sensitive orifice length on the damping force are observed, respectively. The results reported herein will provide a better understanding of the shock absorber.

• Journal of Korean Society on Water Environment
• /
• v.28 no.3
• /
• pp.384-393
• /
• 2012

Saemangeum lake is an artificial lake created by reclamation works and an estuary embankment since 2006. The sea water flows into the lake by the operation of two sluice gates, and the freshwater enters into the lake by the upper streams. For the reflection of hydrology and hydrodynamics effects in Saemangeum area, a hydrodynamics model was developed by connecting Hydrological Simulation Program with Fortran (HSPF) and Environmental Fluid Dynamic Code (EFDC). The HSPF was applied to simulate the freshwater discharge from the upper steam watershed, and the EFDC was performed to compute water flow, water temperature, and salinity based on time series from 2008 to 2009. The calibration and validation are performed to analyze horizontal and vertical gradients. The horizontal trend of model simulation results is reflected in the trend of observed data tolerably. The vertical trend is conducted an analysis of seasonal comparisons because of the limitation of vertically observed data. Water temperature reflects on the seasonal changes. Salinity has an effect on the near river input spots. The impact area of salinity is depending on the sea water distribution by gate operation, mainly.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.105.1-105.1
• /
• 2011

We present the modeling results of deuterium fractionation of water ice, $H_2$, and the primary deuterium isotopologues of $H3^+$ in the physical conditions associated with the star and planet formation process. We calculated the deuterium chemistry for a range of gas temperatures (Tgas~10-30 K) and ortho/para ratio (opr ) of $H_2$ based on state-to-state reaction rates and explore the resulting fractionation including the formation of a water ice mantle coating grain surfaces. We find that the deuterium fractionation exhibits the expected temperature dependence of large enrichments at low gas temperature, but only for opr-H2<0.01. More significantly the inclusion of water ice formation leads to large D/H ratios in water ice (${\geq}10^{-2}$ at 10 K) but also alters the overall deuterium chemistry. For T<20 K the implantation of deuterium into ices lowers the overall abundance of HD which reduces the efficiency of deuterium fractionation at high density. Under these conditions HD will not be the primary deuterium reservoir in the cold dense interstellar medium and $H3^+$ will be the main charge carrier in the dense centers of pre-stellar cores and the protoplanetary disk midplane.