• 한국물환경학회지
• /
• 제39권2호
• /
• pp.153-161
• /
• 2023

The reservoir tank in an apartment is crucial for maintaining the quality of drinking water after it has undergone treatment. Investigating the water quality and potential contaminants in the reservoir tank is essential to ensure the safety of the drinking water. This study examined the water quality and precipitated suspended solids that accumulate at the bottom of the reservoir tanks in four apartments located in Gyeonggi province. As a result of the water quality investigation, turbidity increased proportionally to the distance from the water treatment plant (WTP) to the household. Heavy metals were also detected in the reservoir tank inlet but not in the water supplied from the WTP. The precipitated suspended solids (SS) in the reservoir tank contain high levels of heavy metals and total organic carbon (TOC). The precipitated SS mainly consists of Al, Mn, and Fe, which are expected to be a combination with turbidity-inducing substances. The X-ray diffraction (XRD) analysis revealed the presence of γ-FeO(OH), MnO₂, and β-Fe₂O₃ in the SS. Additionally, F-EEM analysis indicates that the dissolved organic matter in the SS is mainly derived from a natural water source and microorganism activities, including metal-oxidizing bacteria and biofilms that can absorb metal ions. Based on these findings, several countermeasures can be taken to prevent the inflow of SS into the household, including regularly cleaning the reservoir tank, replacing or cleaning old pipes in the water supply system, and implementing monitoring and filtering systems to manage the SS.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.787-791
• /
• 2009

본 논문에서는 수질을 향상시키고 저수조를 온라인 관리하기 위하여 정보 필터링을 이용한 저수조 무선 통합 관리를 제안하였다. 저수조 수위 센서가 저수위 감지시 저수조 컨트롤에서 무선을 통해 데이터를 무선 컨트롤로 보내어 펌프를 가동한다. 이때 저수조에서 일어나는 각종 데이터를 라인전송 모뎀으로 송신한다. 라인전송 모뎀에서 수신된 데이터는 각 시간 단위로 로그를 기록한 후 데이터베이스에 저장된다. 제안된 방법에서는 저수조의 상황과 환경을 정의하였고 정보 필터링을 이용하여 펌프동작, 태양 전지량, 약품량, 저수량, 회선, 모뎀에 따른 적합한 서비스를 예측하였다. 정보 필터링을 이용한 저수조 무선 통합 관리를 개발하여 제안한 방법의 논리적 타당성과 유효성을 검증하기 위해 시험적인 적용을 시도하고자 한다.

• 한국콘텐츠학회논문지
• /
• 제9권6호
• /
• pp.9-16
• /
• 2009

수자원 관리 서비스를 위한 인프라스트럭처가 구축되면서, 환경 친화적인 저수조 관리의 중요성이 부각되고 있다. 본 논문에서는 수질 향상을 하고 저수조를 온라인 관리하기 위하여 예측을 이용한 환경 친화적인 저수조 관리를 제안하였다. 제안된 방법에서는 저수조의 상황과 환경을 정의하였고 협력적 필터링을 이용하여 펌프동작, 태양전지, 약품, 저수위, 전화회선, 모뎀에 따른 적합한 서비스를 예측하였다. 예측을 이용한 환경 친화적인 저수조 관리 시스템의 성능 평가를 하기 위해 대응표본 T-검정을 실시하여 유용성을 검증하였다. 평가 결과, 서비스에 대한 만족도의 차이가 통계적으로 의미가 있음을 증명하였고 높은 만족도를 보임을 확인하였다. 따라서 상황 정보 및 환경정보를 제공하여 효율적인 예측에 대한 만족도와서비스의 질을 향상시켰다.

• Design & Manufacturing
• /
• 제15권1호
• /
• pp.66-71
• /
• 2021

In this study, die turning injection(DTI) mold design for manufacturing reservoir fluid tanks used for cooling in-vehicle batteries, inverters, and motors was conducted based on multi-field CAE. Part design, performance evaluation, and mold design of the reservoir fluid tank was performed. The frequency response characteristics through modal and harmonic response analysis to satisfy the automotive performance test items for the designed part were examined. Analysis of re-melting characteristics and structural analysis of the driving part for designing the rotating die of the DTI mold were performed. Part design was possible when the natural frequency performance value of 32Hz or higher was satisfied through finite element analysis, and the temperature distribution and deformation characteristics of the part after injection molding were found through the first injection molding analysis. In addition, it can be seen that the temperature change of the primary part greatly influences the re-melting characteristics during the secondary injection. The minimum force for driving the turning die of the designed mold was calculated through structural analysis. Hydraulic system design was possible. Finally, a precise and efficient DTI mold design for the reservoir fluid tank was possible through presented multi-field CAE process.

• 한국콘텐츠학회논문지
• /
• 제9권8호
• /
• pp.1-8
• /
• 2009

IT 융합 기술의 발전에 따라 정부의 4대강 복원을 위한 마스터플랜이 구축되면서, 환경 친화적인 수질 오염 관리의 중요성이 부각되고 있다. 본 논문에서는 친환경 저수조의 수질 향상과 온라인 관리를 하기 위해서 저수조 자동 분류를 이용한 효과적인 수질 오염 관리를 제안하였다. 제안된 방법에서는 수질오염 평가의 7가지 요소들을 정의하였고 센서를 이용하여 수소이온농도(pH), 화학적 산소요구량(COD),부유 물질량(SS), 용존 산소량(DO), 대장균군수(MPN), 총인 (T-P), 총질소(T-N)에 따른 적합한 수질 오염 관리를 하였다. 저수조의 7가지의 수질 오염 요소간의 측정치를 평가하고 [1,9] 사이에 분포하도록 정규화하였다. 저수조 자동 분류를 이용한 수질 오염 관리 시스템의 성능 평가를 하기 위해 F-측정식을 이용하여 유용성을 검증하였다. 평가 결과, 기존 시스템에 대한 만족도의 차이가 통계적으로 의미가 있음을 증명하였다.

• 한국농공학회지
• /
• 제42권4호
• /
• pp.76-86
• /
• 2000

The objective function of reservoir storage error was suggested to simulate daily reservoir inflow. DAWAST model, UMAX, LMAX, FC,CP, CE were calibrated. Daily reservoir inflow was imulated with calibrated parameters and reservoir storage was simulated on a daily basis. The simulated results were compared with the monthly results by Gajiyama equation and ten-day results by Tank rainfall-runoff model through equal value lines and hydrographs . DAWAST model showed the best results compared with Gajiymama equation and Tank model. Especially, DAWAST model showed a good agreement in dry periods. NEW concept using objective function of storage error was believed to be satisfactory and to be applied in estimating reservoir inflow.

• 대한토목학회논문집
• /
• 제31권6B호
• /
• pp.499-505
• /
• 2011

저수지내에서의 탁수층의 혼합거동은 연중 온도변화에 영향을 받으며, 특히 여름철에 발생하는 한 개 내지 두 개의 수온약층과 이에 따라 밀도가 다른 연직층 분포에 의해 변화한다. 이와 같은 밀도성층은 연직방향의 혼합을 제한하고 저수지내에서 다양한 수리학적인 거동을 야기한다. 따라서 저수지내에서는 특정 수질 문제를 해결하기 위해 선택취수를 수행할 수 있다. 본 연구에서는 이와 같은 선택취수의 효울을 해석하기 위하여 성층흐름의 수리학적 특성에 관한 실험연구를 수행하였다. two-tank 기법을 이용한 성층수조에서 밀도경사와 유량을 변수로 한 각 조건별 취수구 주변의 수리학적 특성을 입자영상유속계(PIV)를 이용하여 측정하였다. 측정된 유속장을 이용하여 Richardson 수에 따른 선택취수의 효율에 대한 상관관계를 제시하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제18권2호
• /
• pp.32-37
• /
• 2021

The piston reservoir is mainly used in hydraulic blow-down system for aerospace engineering. The reservoir is heavy due to both hydraulic cylinder and piston in pressurization. The positive expulsion tank with rubber diaphragm has been mostly applied propellant and fuel tank at low pressure to satellites. To reduce weight, the reservoir that can be used at high pressure with rubber diaphragm was developed. In this research, the prediction of life-time for the rubber diaphragm was implemented through an accelerated life test, as a part of development of new reservoir. Also, the diaphragm was stored in an temperature chamber at the same condition as and operation with hydraulic oil. As a result, the life-time for a rubber diaphragm was successfully evaluated via Arrhenius law and Time-Temperature Superposition based on failure times over temperatures in the accelerated test.

• Earthquakes and Structures
• /
• 제16권5호
• /
• pp.523-532
• /
• 2019

Different types of gas reservoir such as Liquid Natural Gas (LNG) are among the strategic infrastructures, and have great importance for any government or their private owners. To keep the tank and its contents safe during earthquakes especially if the contents are of hazardous or flammable materials; using seismic protection systems such as base isolator can be considered as an effective solution. However, the major deficiency of this system can be the large deformation in the isolation level which may lead to the failure of bearing system. In this paper, as a solution, the efficacy of an optimally designed combined vibration control system, the combined laminated rubber isolator and rotational friction damper, is investigated to evaluate the enhancement of an existing metal tank response under both far- and near-field earthquakes. Responses like impulsive and convective accelerations, base shear, and sloshing height are studied herein. The probabilistic framework is used to consider the uncertainties in the structural modeling, as well as record-to-record variability. Due to the high calculation cost of probabilistic methods, a simplified structural model is used. By using the Mont-Carlo simulation approach, it is revealed that this combined isolation system is a highly reliable system which provides considerable enhancement in the performance of reservoir, not only leads to the reduction of probability of catastrophic failure of the tank but also decrease the reservoir damage during the earthquake. Moreover, the relative displacement of the isolation level is controlled very well by this combined system.

• 한국항해항만학회지
• /
• 제36권2호
• /
• pp.97-103
• /
• 2012

Overtopping Wave Energy Convertor (OWEC) is an offshore wave energy convertor, which comprises the circular ramp and reservoir. It collects the overtopped waves and converting water pressure head into electric power through the hydro-turbines installed in the vertical duct, which is fixed in the sea bed. The performance of OWEC can be represented by the operating water heads of the device, which depends on the amount of the wave water overtopping into the reservoir. In the present paper, the reservoir with the duct connecting to the sea water are studied in the 3D numerical wave tank, which has been developed based on the computational fluid dynamics software Fluent 6.3. Both the overtopping motion and the discharges of the reservoir are investigated together, and several shape parameters and incident wave conditions are varied to demonstrate their effects on the performance of OWEC.