• Design & Manufacturing
• /
• v.17 no.2
• /
• pp.22-26
• /
• 2023

As Light-Emitting Diodes(LEDs) continue to advance in performance, their application in automotive lamps is increasing. Automotive LEDs utilize light guides not only for aesthetics but also to control light quantity and direction. Light guides employ patterns of a few hundred micrometers(㎛) to regulate the light, and the surface roughness(Ra) of these patterns can reach tens of nanometers(nm). Given that these light guides are produced through injection molding, mold processing technology with high surface quality micro-patterns is required. This study serves as a preliminary investigation into the development of high surface quality micro-pattern processing technology. It examines the surface roughness of the workpiece based on the cutting direction of the pattern and the cutting fluid type when cutting micro-patterns on STAVAX steel using cubic Boron Nitride(cBN) tools. The experiments involved machining a step-shaped micro-pattern with a height of 60 ㎛ and a pitch of 400 ㎛ in a 22×22 mm area under identical cutting conditions, with only the cutting direction and cutting fluid type being varied. The machining results of four cases were compared, encompassing two cases of cutting direction(parallel to the pattern, orthogonal to the pattern) and two cases of cutting fluid type (flood, mist). Consequently, the Ra value was found to be the highest(Ra 128.33 nm) when machining with the flood type in parallel to the pattern, while it was the lowest(Ra 95.22 nm) when machining with the mist type orthogonal to the pattern. These findings confirm that there is a difference of up to 25.8 % in the Ra value depending on the cutting direction and cutting fluid type.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.5
• /
• pp.671-683
• /
• 2004

This study was carried out to understand long-range transport of $SO_2$ using aircraft measurements for the identification of it's horizontal and vertical concentration and distribution pattern. Thirteen missions of aircraft measurements have been done around 37$^{\circ}$00'/124$^{\circ}$30' from October 1997 to November 2001. Concentrations of $SO_2$ was 1.5~2.0 ppb in the below mixing layer, 0.6~1.1 ppb in the above mixing layer. $SO_2$ was found to be relatively higher than marine background level, 0.08~0.2ppb, indicating the western coast being influenced by long-range transport except for the summer season. The vertical distribution of $SO_2$ was classified into 3 groups using its vertical sounding and meteorology pattern; the first is linear decay pattern, the second is exponential decay pattern, and the last is gaussian distribution pattern in the below mixing layer, 2 patterns of linear decay and gaussian distribution patterns in the upper layer. It is founded that vertical distribution pattern is strongly dependent on meteorological condition, for example atmospheric stability and predominant air flow.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.6
• /
• pp.1378-1382
• /
• 2008

This study is aim to evaluate pulse diagnosis as indicators for classification of the pattern identifications in stroke patients. To get the clinical information, we recruited the onset 1 month stroke patients through the multicenter network which consists of 13 oriental hospitals. The clinical informations about three pairs of pulse wave form and levels of their significancy based on the case report form (CRF) were collected and their distribution in each pattern identification were analyzed. The results are as follows Fire-Heat group shows high portions of floating pulse, rapid pulse and solid pulse. Qi Defficiency group has a greater portion of deep pulse, slow pulse, deficient pulse. The well-defined character of Phlegm-Retained Fluid, Yin Defficiency, Static Blood groups cannot be explained by pulse wave form. These results show a rough relationship between the pulse diagnosis and pattern identifications of stroke therefore, further studies are required to determine the pulse diagnosis as significant indicators of stroke pattern identification.

• The Research Journal of the Costume Culture
• /
• v.5 no.3
• /
• pp.176-183
• /
• 1997

To develop the bodice pattern of the master size of the established size chart which was suggested in the former studies, the wearing experiment was practiced. According to the result, developed pattern design in this study boys\` bodily characteristics were reflected fully. And especially, New pattern design method was suggested at chest circumference, neck circumference, arm circumference, chest breadth, and center front line. The study results were put into the database in order to apply apparel CAD system, and they could be easily used in standardization work of design pattern.

• Molecules and Cells
• /
• v.26 no.4
• /
• pp.338-343
• /
• 2008

An embryonic stem cell is a powerful tool for investigation of early development in vitro. The study of embryonic stem cell mediated neuronal differentiation allows for improved understanding of the mechanisms involved in embryonic neuronal development. We investigated expression profile changes using time course cDNA microarray to identify clues for the signaling network of neuronal differentiation. For the short time course microarray data, pattern analysis based on the quadratic regression method is an effective approach for identification and classification of a variety of expressed genes that have biological relevance. We studied the expression patterns, at each of 5 stages, after neuronal induction at the mRNA level of embryonic stem cells using the quadratic regression method for pattern analysis. As a result, a total of 316 genes (3.1%) including 166 (1.7%) informative genes in 8 possible expression patterns were identified by pattern analysis. Among the selected genes associated with neurological system, all three genes showing linearly increasing pattern over time, and one gene showing decreasing pattern over time, were verified by RT-PCR. Therefore, an increase in gene expression over time, in a linear pattern, may be associated with embryonic development. The genes: Tcfap2c, Ttr, Wnt3a, Btg2 and Foxk1 detected by pattern analysis, and verified by RT-PCR simultaneously, may be candidate markers associated with the development of the nervous system. Our study shows that pattern analysis, using the quadratic regression method, is very useful for investigation of time course cDNA microarray data. The pattern analysis used in this study has biological significance for the study of embryonic stem cells.

• Fashion & Textile Research Journal
• /
• v.6 no.2
• /
• pp.169-176
• /
• 2004

The clouds-shaped pattern is originated from Taoism, Buddhism, and Confucianism. It stands for good-luck, longevity and productivity. It has been used on its own or with other patterns since the ancient times. It also has various forms. It particularly was used more frequently than any other patterns as a typical good-luck pattern, representing auspiciousness, divine authority, and so on in Chosun dynasty. The pattern, according to its component parts, is classified as individual type and compound type, which is mixed with other patterns such as treasure pattern, plant pattern, letter pattern, or animal pattern. For both individual type and compound type, swastika-shaped cloud pattern was mostly used. For compound type, the pattern compounded of treasure pattern was extraordinarily used a lot. In terms of the arrangement, the most common arrangement methods were brick-shaped arrangement and dense type arrangement, the arrangement method that spreads the patterns all over the surface. Among the fabrics with clouds-shaped pattern, satin damask fabrics had the majority. Clouds-shaped pattern was used a lot in men's Po(coat), such as Dahnryoung, Jiknyoung, Chollik, etc. rather than in women's clothes. It was a typical pattern used in Dahnryoung, an official uniform that represented people in the highest class in Chosun dynasty. The divine power symbol of this pattern indicated the authority and dignity that the upper class people could have.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.1
• /
• pp.51-54
• /
• 2015

An electro-plating technology on a cured isotropic conductive pattern with a hybrid Cu paste composed of resin matrix, copper, and solder powders has been developed. In a conventional technology, Ag paste was used to perform a conductive pattern on a PCB or silicon substrate. From previous research, the electrical conductive mechanism and principle of the hybrid Cu paste were concisely investigated. The isotropic conductive pattern on the PCB substrate was performed using screen-printing technology. The optimum electro-plating condition was experimentally determined by processing parameters such as the metal content of the hybrid Cu paste, applied current density, and time for the electroplating in the plating bath. The surfaces and cross-sections were observed using optical and SEM photographs. In conclusion, the optimized processing conditions for Cu electro-plating technology on the conductive pattern were a current density of $40mA/cm^2$ and a plating time of 20min on the hybrid Cu paste with a metal content of 44 vol.%. More details of the mechanical properties and processing conditions will be investigated in further research.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.3
• /
• pp.69-83
• /
• 2013

Clothes show not just the different social status of people, but the ideology and value of former society through pattern, colour, materials, shapes, etc. The purpose of this article is to fill the academic blank of this part by researching the pattern of fabric design in Jing Pai(Beiing style) and Hai Pai(Shanghai style) cheong-sam during the period of the Republic of China. The contrastive analysis of regional pattern between Jing Pai and Hai Pai cheong-sam expect to provide the theoretical basis for the former fashion designers and scholars. There are three approaches in the article: Data collection method, comparison method and Combining theory with practice method as film. Regarding components of pattern, both Jing Pai and Hai Pai cheong-sam have mostly single or composite pattern like plants. Further the most of Jing Pai cheong-sam pattern is traditional flower pattern. But Haipai cheong-sam patterns have some western flower pattern. Beside that, it have some geometry pattern. Regarding arrangement of the pattern, both cheong-sams have scattered dot style, the border style, and pictures style. But continuous type of Jing Pai cheong-sam is less while Hai Pai cheong-sam is the most. Comparing Jing Pai cheong-sam color of patterns in "Moment in Peking" is unadorned and types are simple as chinese traditional clothes; However, "In the Mood for Love" introduces us various material colors, new types of patterns and extraneous characteristic geometry patterns of Hai Pai cheong-sam. Generally speaking, the main characteristic of Jing Pai cheong-sam is traditional and conservatism. It keeps Chinese traditional pattern and culture to the most extent. However, Hai Pai cheong-sam are confluent and open with absorbed external culture and techniques which are endowed new artistic color.

• Journal of Sasang Constitutional Medicine
• /
• v.27 no.1
• /
• pp.42-56
• /
• 2015

Objectives This research was proposed to present Clinical Practice Guideline(CPG) for Taeeumin Disease of Sasang Constitutional Medicine(SCM): Esophagus Cold-based Exterior Cold (Wiwansuhan-pyohan) disease. This CPG was developed by the national-wide experts committee consisting of SCM professors. Methods First, collection and organization of literature related to SCM such as Donguisusebowon, Text book of SCM, Clinical Guidebook of SCM and Fundamental research to standardize diagnosis of Sasang Constitutional Medicine was performed. Secondly, journals related to clinical trial or Human complementary medicine of SCM were searched. Finally, 7 articles were selected and included in CPG for Esophagus Cold-based Exterior Cold (Wiwansuhan-pyohan) disease. Results & Conclusions The CPG of Esophagus Cold-based Exterior Cold (Wiwansuhan-pyohan) disease in Taeeumin Disease include classification, definition and standard symptoms of each pattern. Esophagus Cold-based Exterior Cold (Wiwansuhan-pyohan) disease consists of two aspects : Esophagus-Cold (Wiwanhan) and Esophagus-Cold Lung-Dry (Wiwanhan-paejo) symptomatology. Esophagus-Cold (Wiwanhan) symptomatology is classified into mild and moderate pattern by severity. Mild pattern of Esophagus-Cold (Wiwanhan) symptomatology is classified into Supraspinal Exterior (Baechu-pyo) initial and Wheezing-Dyspnea (Hyocheon) pattern. Moderate pattern of Esophagus-Cold (Wiwanhan) symptomatology is classified into Cold-reversal (Hanguel) and Cold-reversal (Hanguel) advanced pattern. And Esophagus-Cold Lung-Dry (Wiwanhan-paejo) symptomatology is classified into severe and critical pattern by severity. Severe pattern of Esophagus-Cold Lung-Dry (Wiwanhan-paejo) is classified into Dry-Cold (Johan) pattern and Dry-Cold (Johan) advanced pattern. Critical pattern of Esophagus-Cold Lung-Dry (Wiwanhan-paejo) symptomatology consists of Dry-Cold (Johan) intense pattern (Eumhyeol-mogal handa pattern).

• Journal of Sasang Constitutional Medicine
• /
• v.26 no.1
• /
• pp.45-54
• /
• 2014

Objectives This research was proposed to present Clinical Practice Guideline(CPG) for Soeumin Disease of Sasang Constitutional Medicine(SCM): Greater Yin Symptomatology. This CPG was developed by the national-wide experts committee consisting of SCM professors. Methods First, it was performed that search and collection of literature related SCM such as "Dongeuisusebowon", Textbook of SCM, Clinical Guidebook of SCM and Fundamental research to standardize diagnosis of Sasang Constitutional Medicine. And journal search related clinical trial or Human complementary medicine of SCM was performed domestic and overseas. Finally, 1 article was selected and included in CPG for Greater Yin Symptomatology of Stomach Cold-based Interior Cold disease in Soeumin disease. Results & Conclusions CPG of Greater Yin symptomatology in Soeumin Disease include classification, definition and standard symptoms of each pattern. Greater Yin symptomatology is classified into mild and moderate pattern by severity. Greater Yin Symptomatology Mild pattern is classified into Greater Yin Symptomatology accompanied abdominal pain and bowel irritability and Greater Yin pattern accompanied Epigastric stuffiness and fullness. And Greater Yin Symptomatology moderate pattern is classified into Greater Yin pattern accompanied Jaundice, Greater Yin pattern accompanied Edema and Greater Yin pattern by Yin toxin.