• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.221-222
• /
• 2005

In this paper, application of NN (Neural Network) as a method of pattern discrimination of PD(partial discharge) which occurs at the stator coil of traction motor was studied. For PD data acquisition, three defective models are manufactured such as internal discharge model, slot discharge model and surface discharge model. PD data for recognition were acquired from PD detector and DAQ board which is able to analysis the PD signal and perform the pattern discrimination. Statistical distributions and parameters are calculated to discriminate PD sources. And also these statistical distribution parameters are applied to classify PD sources by BP and has good recognition rate on the discharge sources.

• Journal of Conservation Science
• /
• v.37 no.1
• /
• pp.55-62
• /
• 2021

This study investigated mechanical property changes by measuring compression factors, resilience, and compressive strength according to packaging pattern and filling rate to identify the applicability of cultural heritage packaging using thermoplastic polyurethane elastomers (TPU). Research results indicate that the cross-shaped 3D pattern showed the best resilience when the internal filling rate was 20%, while the octet pattern was the best when the filling rate was either 40 and 60%. The octet pattern had the best mechanical properties and stability with resistance capacities of 20.79 kgf/cm², 40.40 kgf/cm², and 82.23 kgf/cm² at 38%, 39%, and 40% recovery speeds, respectively, depending on the internal filling rate (20, 40, 60%). Based on these results, basic data on the applicability, stability, and reliability of 3D cultural heritage packaging materials using TPU materials were obtained.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.950-962
• /
• 2013

The purpose of this study was to develop the slim-fit dress shirt pattern. Among the published educational patterns, there were four patterns based on similar design and silhouette with slim-fit dress shirts. Then, the drafting method of those patternsBB were compared and analyzed. The subjects for wearing evaluation were three 20 to 39 aged average-sized men. After the wearing evaluation(5 Likert point scale), N pattern had been chosen as the final comparison pattern because it received the highest points. The slim-fit shirt pattern was developed based on the result of wearing evaluation. The foundation design were as following: shirt length (Stature/2-12), back length (Stature/4), armhole depth (Chest/4+1), width (Chest/4+3), Interscye; Back (Chest/6+5), Interscye; Front (Chest/6+4), width of the nape of neck (Neck/6+1=◎), height of the nape of neck (◎/3), of the front neck (◎-0.5), depth of the front neck(◎+1.5). After the wearing evaluation about researched pattern and N pattern, researched patternsBB scale points were bigger than N pattern and there were slight differences. The scale points for N patternsBB movement evaluation showed highest points on all contents. Therefore, the researched pattern is suitable for the original form of slim-fit dress shirt. The new dress shirt pattern reflected the slim-fit trend in the research expected to help educational environment and industrial site.

• Korean Journal of Radiology
• /
• v.21 no.6
• /
• pp.717-725
• /
• 2020

Objective: To assess left ventricular remodeling patterns using cardiac computed tomography (CT) in children with congenital heart disease and correlate these patterns with their clinical course. Materials and Methods: Left ventricular volume and myocardial mass were quantified in 17 children with congenital heart disease who underwent initial and follow-up end-systolic cardiac CT studies with a mean follow-up duration of 8.4 ± 9.7 months. Based on changes in the indexed left ventricular myocardial mass (LVMi) and left ventricular mass-volume ratio (LVMVR), left ventricular remodeling between the two serial cardiac CT examinations was categorized into one of four patterns: pattern 1, increased LVMi and increased LVMVR; pattern 2, decreased LVMi and decreased LVMVR; pattern 3, increased LVMi and decreased LVMVR; and pattern 4, decreased LVMi and increased LVMVR. Left ventricular remodeling patterns were correlated with unfavorable clinical courses. Results: Baseline LVMi and LVMVR were 65.1 ± 37.9 g/m² and 4.0 ± 3.2 g/mL, respectively. LVMi increased in 10 patients and decreased in seven patients. LVMVR increased in seven patients and decreased in 10 patients. Pattern 1 was observed in seven patients, pattern 2 in seven, and pattern 3 in three patients. Unfavorable events were observed in 29% (2/7) of patients with pattern 1 and 67% (2/3) of patients with pattern 3, but no such events occurred in pattern 2 during the follow-up period (4.4 ± 2.7 years). Conclusion: Left ventricular remodeling patterns can be characterized using cardiac CT in children with congenital heart disease and may be used to predict their clinical course.

• The International Journal of Costume Culture
• /
• v.8 no.2
• /
• pp.97-104
• /
• 2005

In this research, the fit of basic dresses was examined, by analyzing and comparing the satisfaction of fitness of basic dresses made by the draping method on a custom-made replica body form and that of a basic dress made by the flat pattern method. Basis dresses were produced by the draping method for each 52 subjects using custom-made body forms, and another kind basic dresses for each subjects were produced by the flat pattern method using measurements of body sizes. Both basic dresses received high scores for the satisfaction of fit, but the basic dresses produced by draping method received higher scores. Thus it is expected to produce a more successful fit by draping a basic dress on a custom-made body form. Future research using more subjects might confirm these results. A more concrete analysis through using additional satisfaction tests could be conducted. For example, each subject might also serve as an evaluator to rate her satisfaction of fit wearing each of the two custom-made dresses. Finally, examining various body forms is suggested.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.4 s.40
• /
• pp.453-461
• /
• 1991

The purpose of this research was to develop an automatic design with dialogue function in computer for pants pattern making. AutoCAD including AutoLISP was the programable software package, so AutoCAD were used basically for this research. The conclusions were like these; 1. Dialogue functions of computer allowed the designer to choose emotional elements. 2. The coordinate points needed in drafting for women's pants pattern making were suggest-ed by numerical fomula. So, if the input data of body sizes needed were used, pants patterns for person were automatically obtained as the output. 3. The several curvature parts were presented by using exponent function and the arc drawing of AutoCAD and the degree of bends were to be selected by choosing the simple parameter of algebraic function and arc AutoCAD command. 4. The program permited pattern manipulation and pattern grading of five standard sizes were presented. Also its flow chart by AutoLISP with dialogue function were presented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1309-1319
• /
• 1996

The research for the classification of the natural defects in welding zone is performd using the neuro-pattern recognition technology. The signal pattern recognition package including the user's defined function is developed to perform the digital signal processing, feature extraction, feature selection and classifier selection, The neural network classifier and the statistical classifiers such as the linear discriminant function classifier and the empirical Bayesian calssifier are compared and discussed. The neuro-pattern recognition technique is applied to the classificaiton of such natural defects as root crack, incomplete penetration, lack of fusion, slag inclusion, porosity, etc. If appropriately learned, the neural network classifier is concluded to be better than the statistical classifiers in the classification of the natural welding defects.

• Journal of International Academy of Physical Therapy Research
• /
• v.9 no.3
• /
• pp.1537-1542
• /
• 2018

This study aimed to identify the effects of kinesio taping (KT) applied in a proprioceptive neuromuscular facilitation (PNF) pattern on the pain, weight-bearing distribution (WBD), and walking ability of knee osteoarthritis (KOA) patients. Thirty women with KOA were randomly allocated to a control group (n=15) with KT at the quadriceps only, and a PNF pattern group (n=15) with KT at the quadriceps and gastrocnemius muscle. Pain intensity was measured using a visual analogue scale during walking. In addition, WBD, and walking ability were measured before and 30 minutes after KT application. The VAS significantly reduced in both groups after the intervention (p<.05). WBD (p<.05, ES=.32) and walking ability (p<.05, ES=.38) showed a significant change in the PNF pattern group, and in the inter-group comparison, the PNF pattern group showed a significant difference compared to the control groups. These results demonstrate that KT application with PNF pattern effectively attenuate the pain and improves WBD and walking ability in KOA patients.

• Laser Solutions
• /
• v.9 no.3
• /
• pp.1-5
• /
• 2006

Diffraction grating is the optical device which has periodic pattern. Decorative logotypes is the one of application of diffraction grating. In this paper diffraction grating for decorative logotype is fabricated by dot pattern in stead of line pattern. A metallic mold for diffraction gratings is fabricated with a mode-locked 12 ps Nd:YVO4 laser. Laser pulses with a wavelength of 355nm are irradiated on the surface of NOK 80, a mold material, to generate dot patterns. In order to minimize the dot diameter, laser power is set just above the ablation threshold of NOK 80. Results show that the spectrum from the fabricated mold is good enough for some industrial application

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2006.11a
• /
• pp.114-117
• /
• 2006

Diffraction grating is the optical device which has periodic pattern. Decorative logotypes is the one of application of diffraction grating. In this paper diffraction grating for decorative logotype is fabricated by dot pattern in stead of line pattern. A metallic mold for diffraction gratings is fabricated with a mode-locked 12 ps $Nd:YVO_4$ laser. Laser pulses with a wavelength of 355nm are irradiated on the surface of NOK 80, a mold material, to generate dot patterns. In order to minimize the dot diameter, laser power is set just above the ablation threshold of NOK 80. Results show that the spectrum from the fabricated mold is good enough for some industrial application.