• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6A
• /
• pp.535-542
• /
• 2010

Precise estimation of a structure's dynamic characteristics is indispensable for ensuring stable dynamic responses during lifetime especially for the structures which can experience resonance such as railway bridges. In this paper, the results of forced vibration tests of different excitation methods (vibration exciter and impact hammer) are compared to examine the differences and the cause of differences of extracted natural frequencies. Consequently a natural frequency modification method is suggested to eliminate effects of non-structural disturbance factors. Also, sequential forced vibration tests are performed before and after track construction according to the construction stage of a railway bridge, and the variation of natural frequencies are examined. Effect of added mass of vibration exciter and variation of support condition due to the level of excitation force are concluded as the major cause of natural frequency differences. Thus eliminating these effects can enhance the reliability of the extracted natural frequencies. Construction of track affects not only the mass of structure but also the stiffness of the structure. Also, the amount of increase in stiffness varies according to the level of structural deflection. Therefore, reasonable estimation of the level of structural response during operation is important for precise natural frequency calculation at design phase.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5B
• /
• pp.473-482
• /
• 2009

This study numerically discusses wave forces acting on a vertical wall such as breakwaters or revetments, subjected to incident undular or turbulent bores. Due to the complex hydrodynamics of bore, its wave forces have been predicted, mainly through laboratory experiments. Numerical simulations in this paper were carried out by CADMAS-SURF(CDIT, 2001), which is based on Navier-Stokes momentum equations and VOF method (Hirt and Nichols, 1981) for tracking free water surface. Its original source code was also partly revised to generate bore in the numerical water channel. Numerical raw data computed by CADMAS-SURF included great strong spike phenomena that show the abrupt jumps of wave loads. To resolve this undesired noise of raw data, the band-pass filter with the frequency of 5Hz was utilized. The filtered results showed reasonable agreements with the experimental results performed by Matsutomi (1991) and Ramsden (1996). It was confirmed that CADMASSURF can be applied to the design of coastal structures against tsunami bores. In addition, the transformation process and propagation speed of bores in the same 2-d water channel were discussed by the variations of water level for time and space. The numerical results indicated that the propagation speed of bore was changed due to the nonlinear interactions between negative and reflected waves.

• 한국노년학
• /
• v.31 no.3
• /
• pp.607-621
• /
• 2011

Purpose The purpose of this study was to examine the relationship between physical activities, sleep disturbance, and health related quality of life (HRQOL) in patients with chronic obstructive pulmonary disease (COPD). Methods A descriptive survey design used pretest dataset of COPD symptom management intervention study (N=245). Measures included the international physical activity questionnaire, the COPD and asthma sleep impact scale, and the St. George's respiratory questionnaire of HRQOL. The data were analyzed using descriptive analysis, t-test, ANOVA, Pearson correlation coefficients, and simultaneous multiple regression by the SPSS WIN 18.0 program. Results The mean scores (SD) of HRQOL and sleep disturbance were 36.04 (19.43) and 14.33 (6.20), respectively. About 32% of participants were physically inactive. The multivariate approach showed the patients who have more sleep disturbance (β=.27), lower levels of FEV1 % predicted (β=-.23), lower physical activities (β=-.19), lower household income (β=-.16), and diagnosed longer than 5 years (β=.14) reported lower HRQOL (R²=.34). Conclusion The findings of this study suggest that improving the quality of sleep and physical activities can be efficient strategies for HRQOL in patients with COPD. Future research in enhancing HRQOL through improving sleep quality and physical activities is needed.

• Asia Marketing Journal
• /
• v.15 no.3
• /
• pp.53-77
• /
• 2013

As advertising and promotions are categorized as operating expenses, managers tend to reduce marketing budget to improve their short term profitability. Gauging the value and accountability of marketing spending is therefore considered as a major research priority in marketing. To respond this call, recent studies have documented that financial market reacts positively to a firm's marketing activity or marketing related outcomes such as brand equity and customer satisfaction. However, prior studies focus on the relation of marketing variable and financial market variables. This study suggests a channel about how marketing activity increases firm valuation. Specifically, we propose that a firm's marketing activity increases the level of the firm's product market information and thereby the dispersion in financial analysts' earnings forecasts decreases. With less uncertainty about the firm's future prospect, the firm's managers and shareholders have less information asymmetry, which reduces the firm's cost of capital and thereby increases the valuation of the firm. To our knowledge, this is the first paper to examine how informational benefits can mediate the effect of marketing activity on firm value. To test whether marketing activity contributes to increase in firm value by mitigating information asymmetry, this study employs a longitudinal data which contains 12,824 firm-year observations with 2,337 distinct firms from 1981 to 2006. Firm value is measured by Tobin's Q and one-year-ahead buy-and-hold abnormal return (BHAR). Following prior literature, dispersion in analysts' earnings forecasts is used as a proxy for the information gap between management and shareholders. For model specification, to identify mediating effect, the three-step regression approach is adopted. All models are estimated using Markov chain Monte Carlo (MCMC) methods to test the statistical significance of the mediating effect. The analysis shows that marketing intensity has a significant negative relationship with dispersion in analysts' earnings forecasts. After including the mediator variable about analyst dispersion, the effect of marketing intensity on firm value drops from 1.199 (p < .01) to 1.130 (p < .01) in Tobin's Q model and the same effect drops from .192 (p < .01) to .188 (p < .01) in BHAR model. The results suggest that analysts' forecast dispersion partially accounts for the positive effect of marketing on firm valuation. Additionally, the same analysis was conducted with an alternative dependent variable (forecast accuracy) and a marketing metric (advertising intensity). The analysis supports the robustness of the main results. In sum, the results provide empirical evidence that marketing activity can increase shareholder value by mitigating problem of information asymmetry in the capital market. The findings have important implications for managers. First, managers should be cognizant of the role of marketing activity in providing information to the financial market as well as to the consumer market. Thus, managers should take into account investors' reaction when they design marketing communication messages for reducing the cost of capital. Second, this study shows a channel on how marketing creates shareholder value and highlights the accountability of marketing. In addition to the direct impact of marketing on firm value, an indirect channel by reducing information asymmetry should be considered. Potentially, marketing managers can justify their spending from the perspective of increasing long-term shareholder value.

• Smart Structures and Systems
• /
• v.30 no.5
• /
• pp.521-535
• /
• 2022

Efficient management of deteriorating civil infrastructure is one of the most important research topics in many developed countries. In particular, the remote displacement measurement of bridges using linear variable differential transformers, global positioning systems, laser Doppler vibrometers, and computer vision technologies has been attempted extensively. This paper proposes a remote displacement measurement system using closed-circuit televisions (CCTVs) and a computer-vision-based method for in-situ bridge bearings having relatively large displacement due to temperature change in long term. The hardware of the system is composed of a reference target for displacement measurement, a CCTV to capture target images, a gateway to transmit images via a mobile network, and a central server to store and process transmitted images. The usage of CCTV capable of night vision capture and wireless data communication enable long-term 24-hour monitoring on wide range of bridge area. The computer vision algorithm to estimate displacement from the images involves image preprocessing for enhancing the circular features of the target, circular Hough transformation for detecting circles on the target in the whole field-of-view (FOV), and homography transformation for converting the movement of the target in the images into an actual expansion displacement. The simple target design and robust circle detection algorithm help to measure displacement using target images where the targets are far apart from each other. The proposed system is installed at the Tancheon Overpass located in Seoul, and field experiments are performed to evaluate the accuracy of circle detection and displacement measurements. The circle detection accuracy is evaluated using 28,542 images captured from 71 CCTVs installed at the testbed, and only 48 images (0.168%) fail to detect the circles on the target because of subpar imaging conditions. The accuracy of displacement measurement is evaluated using images captured for 17 days from three CCTVs; the average and root-mean-square errors are 0.10 and 0.131 mm, respectively, compared with a similar displacement measurement. The long-term operation of the system, as evaluated using 8-month data, shows high accuracy and stability of the proposed system.

• Asia Marketing Journal
• /
• v.10 no.2
• /
• pp.71-98
• /
• 2008

Considerably many numbers of studies on country-of-origin(hereafter COO) effects have been presented in international business and marketing areas. Recent studies have been included the effects of COO of manufacture, parts, and design, as well as the effects of brand origin, reflected by the accelerating convergent manufacture circumstances and increasingly competitive environments. Moderating constructs such as knowledge of product category and involvement as individual variables, have been also introduced and researched in various angles. In addition, how the effects of COO occur as processes is also argued in previous studies. This research has attempted to explain business corporation's strategic decisions on choosing a domain of its product manufacturing for several critical reasons, for cost reduction or better image. We displayed two constructs of brand and manufacture in a positive and negative country image group to reconfirm the existence of the effects of COO. Additionally, the effects of respondents' regulatory fit between their motivational focus and the contents of product messages, have been declared. Furthermore the respondents' motivational focus moderates the main effect of COO on product evaluations in a positive 'made-in' combination, while, surprisingly, it does not statistically moderate in a negative, except attitude. Based on the results, implications and suggestions on how to plan and execute more effective marketing strategies regarding COO dimensions, especially COO of manufacture, are separately presented for each situations when it has already been determined and when it is to be.

• Asia Marketing Journal
• /
• v.11 no.4
• /
• pp.69-93
• /
• 2010

In this research, through experiments, we show that incongruity of color between mediums has positive influence on brand attitude in terms of integrated management of brand. We also present that self-image congruence of 'brand-consumer' has moderating effect on such influence of color incongruity. Mediums were limited to the ones that magnifying visual influence in order only to observe influence of color. With the same reason, visual factors other than color were coherently set or held constant and we chose brands with either low familarity or no previous knowledge. As a result, we find that brand attitude by the incongruity of color between mediums was higher compared to brand attitude by the congruence of color. In case with lower self-image congruence of brand-consumer we show higher change in attitude compared to the one with higher self-image congruence of brand-consumer. We believe our findings are interesting to note that brand may be enhanced by forming positive brand attitude through brand expression i.e., color of visual factors. In addition, we suggest that level of congruence and diversity of brand expression is in fact deeper or wider than that of brand manager's intuition. We see that it is possible for studying brands the incongruity which has been studied as a strategy to reposition mature brands can be a way of improving the recognition on new brands.

• The Journal of Korean Medicine
• /
• v.44 no.1
• /
• pp.128-128
• /
• 2023

Objectives: This research aimed to develop a guideline for evaluating safety and performance of electronic warm-acupuncture apparatus. With the development of medical devices like electronic warm-acupuncture apparatus with improved performance, convenience and safety measures compared to traditional warm-acupuncture needling, safety and performance guideline is a necessity. Methods: By referring to existing standards and guidelines of other electronic devices for Korean medicine with heating function, guideline for safety and performance assessment of electronic warm-acupuncture apparatus was drafted Results: The guideline, presents explanation for adequate temperature and settings of the apparatus, and safety measurements providing against thermal runaway situations along with guidelines for the manual. Guideline for detailed test method for the performance of the apparatus such as accuracy of temperature increase and the timer, and safety unit was also provided. The test items and suggested test methods for the requirements of biological, electrical and electromagnetic safety were referred to Korean approval documents of ministry of Food and Drug Safety. Conclusion: We proposed the relevant items to verify performance and safety of warm-acupuncture apparatus to assure patient safety and improve the quality of currently developing devices for application in clinical field.

• Journal of Practical Engineering Education
• /
• v.15 no.2
• /
• pp.529-538
• /
• 2023

At the present time when the need for universal artificial intelligence education is expanding and job changes are being made, research and discussion on artificial intelligence liberal arts education for non-majors in universities who experience artificial intelligence as part of their job is insufficient. Although artificial intelligence education courses for non-majors are being operated, they are mainly operated as theory-oriented education on the concepts and principles of artificial intelligence. In order to understand the general concept of artificial intelligence for non-majors, it is necessary to proceed with experiential learning in parallel. Therefore, this study designs artificial intelligence experiential education learning contents of difficulty that can reduce the burden of artificial intelligence classes with interest in learning by considering the characteristics of non-majors. After, we will examine the learning effect of experiential education using App Inventor and the Orange artificial intelligence platform. As a result of analysis based on the learning-related data and survey data collected through the creation of AI-related projects by teams, positive changes in the perception of the need for AI education were found, and AI literacy skills improved. It is expected that it will serve as an opportunity for instructors to lay the groundwork for designing a learning model for artificial intelligence experiential education learning.

• Journal of Practical Engineering Education
• /
• v.14 no.3
• /
• pp.505-512
• /
• 2022

The purpose of this study is to synthesize effects of the living lab-based education through meta-analysis. Seven primary studies reporting the effect of living lab-based education were carefully selected for data analysis. Research questions are as follows. First, what is the overall effect size of the living lab-based education? The overall effect size refers to the effect on the cognitive and affective domains. Second, what is the effect size of the living lab-based education according to categorical variables? Categorical variables are outcome characteristics, study characteristics, and design characteristics. Results are summarized as follows. First, the overall effect size of living lab-based education was 0.347. Second, the effect size according to the cognitive domain was 1.244 for information process, 0.593 for communication, 0.261 for problem solving, and 0.26 for creativity. Third, the effect size according to subject area was shown in the order of electrical and electronic engineering 1.146, technology and home economics 0.489, artificial intelligence 0.379, and practical arts 0.168. Fourth, the effect size according to school level was 1.058 for high school, 0.312 for middle school, and 0.217 for elementary school. Fifth, the effect size by grade level was 0.295 when two or more grades were integrated and 0.294 for a single grade.