• 한국환경과학회지
• /
• 제11권7호
• /
• pp.697-703
• /
• 2002

In the present study, space allocation methods of pollutant emission from area and mobile sources are assessed by the actual application to air quality modeling of Pohang area. It is found that the TM-based modeling which allocates emission onto the 1km x 1km sized TM-grid system predicts almost the same mean ground-level concentration as that by the GIS-based modeling which uses geographical information of area and mobile sources directly, while maximum ground-level concentration by the TM-based modeling is predicted considerably lower than that by the GIS-based modeling. Moreover, the problem is found that the TM-based modeling causes deviation of mobile roads. In conclusion, it is anticipated to applying GIS-based modeling for a more accurate assessment of air quality in local scale.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.417-419
• /
• 2003

Based on the Chinese resource and environment database, and using the Landsat TM and ETM data acquired in 1990 and 2000 respectively, the spatial-temporal characteristics of land use/cover changes in the Dongting lake area of central China was analyzed. The result showed that cultivated land decreased by 0.57% of total cultivated land. Built -up land and water area expanded, with an increase of 8.97% and 0.43% respectively. 94 percent of the cropland decreased was changed into water (mostly to fishpond) and built-up areas. Land-use changed most quickly in cities, and the slowest in the north and east of the study area.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.330-330
• /
• 2017

The tallest culm length was observed in Geonganghongmi cultivar grown in coast area, and culm length was always taller in coast area than that of inland area among these three red rice cultivars. However, number of tiller per rice plant was not affected by different cultural area. Number of spikelets per panicle was much more increased in inland area. Regional difference in number of spikelets per panicle was only observed in Jeongjinju cultivar. Among these red rice cultivars, the highest brown rice yield was Jeongjinju rice cultivar having 702kg in inland area and 692kg in coast area, respectively. The $L^*$ values, which expresses the brightness, were in the range of 36.3 ~ 36.7, 36.7 ~ 37.0, and 38.7 ~ 39.6 in Jeogjinju, Hongjinju, Geonganghongmi rice cultivars, respectively. The $a^*$ values, which expresses the redness positively and greenness negatively were in the range of 12.3 ~ 12.8, 12.2 ~ 12.3, and 12.1 ~ 11.9 in Jeogjinju, Hongjinju, Geonganghongmi rice cultivars, respectively. In addition, the b values, which expresses the yellowness positively and blueness negatively were in the range of 13.8 ~ 14.0, 13.6 ~ 13.5, and 14.9 ~ 14.7 in Jeogjinju, Hongjinju, Geonganghongmi rice cultivars, respectively. Anthocyanidin content ranged 524 to $610{\mu}g/g$ dry weight basis. Cyanidin content was 11.4 to 14.0 times higher than that of delphinidin under coast and inland area. Among these rice cultivars, anthocyanidin content was always higher in rice cultivar grown at coast area. Highest head brown rice rate was only observed in Geonganghongmi to 95.2 at coast area and 95.4 inland area, respectively. Protein content was always higher in coast area than that of inland area. The lowest protein content was measured in Jeogjinju and amylose content was relatively increased in inland area compared to that of coast area. Consequently, in considered with brown rice yield and pigment content, Hongjinju rice cultivar was recommended in optimal pigment rice cultivar in eastern coast of Gyeongsangbuk-do Province.

• Nuclear Engineering and Technology
• /
• 제25권4호
• /
• pp.507-514
• /
• 1993

Titanium재료는 해수에서 좋은 내식성을 가지는 이유로 최근 원자력발전소 복수기에 사용되고 있다. 그러나, Ti이 tubesheet재 료인 Cu 합금에 접하고 이것이 water box 재료인 탄소강에 접하게될 경우 접촉금속에 심한 galvanic corrosion이 일어나게 된다. 전기화학적 실험에 의하면, 탄소강이 해수속에서 Ti나 Cu에 접할 때 탄소강의 부식속도는 증가할 것이며, Cu가 Ti에 해수중에서 장기간 접촉할 경우에는 Cu의 부식속도는 증가할 것으로 생각된다, 또한 표면적비, R$_1$(surface area of carbon steel/surface area of Ti).와 R$_2$(surface area of carbon steel/surface area of Cu)가 탄소강의 galvanic corrosion에 매우 중요하며. Water box 재료인 탄소강의 부식속도를 최소화하기 위해서는 이들 표면적비가 낮게 유지되어서는 안될 것이라고 생각된다 침지 galvanic 부식 시험결과 surface area of Fe/surface area of Al Brass값이 1일때 탄소강의 부식속도는 4.4mpy 이었으나 이 비가 $10^{-2}$ 일때는 570mpy이었다. 이렇게 연결된 galvanic시편에 Ti tube를 연결한 경우에는 이 비가 1일때 탄소강의 부식율이 4.4mpy에서 13mpy로 증가하였다. 이는 R$_1$가 R$_2$가 분극곡선에 복합적인 영향을 미치는것으로 설명할 수 있다.

• Carbon letters
• /
• 제4권3호
• /
• pp.121-125
• /
• 2003

The Pt-Ru/Carbon as an anode catalyst supported on the commercial activated carbon (AC) having high surface area and micropore was characterized for application of Direct Methanol Fuel Cell (DMFC). The Pt-Ru/AC anode catalyst used in this experiment showed the performance of $600\;mA/cm^2$ current density at 0.3 V. The borohydride reduction process using $NaBH_4$, denoted as a process A, showed much higher current and power densities than process B prepared by changing the reduction and washing process of process A. The particle sizes are strongly affected by the reduction process than the specific surface area of raw active carbon and the sizes are almost constant when the specific surface area of carbon are over than the $1200\;m^2/g$. Smaller particle size of catalyst and more narrow intercrystalite distance increased the performance of DMFC.

• 한국실내디자인학회논문집
• /
• 제18권6호
• /
• pp.239-248
• /
• 2009

Currently in Korea, Researches on universal design have been actively accomplished in various fields as not only housing and public space, but also product design and education. The purpose of this study is to analyze previous researches on universal design and to identify its research trends which might suggest the future directions of the related studies. In this study, researches on universal design were analyzed to classify the types according to research area, objects and respondents. Two hundreds twenty one papers(journal articles, theses, dissertations, etc.) which were published in Korea from 1997 to 2008 were analyzed. The results were as follows. Researches on universal design have increased quantitatively and research topics have been diverse. In the 1990s, with the introduction of universal design concept, research area focused on space design, but since 2000 researches on universal design have been expanded to apply the fashion, product design and education. In terms of research objects, the studies about evaluation and case analysis have conducted more than those about principles and planning design. With regard to research respondent, the studies for the elderly or people with disabilities and those of all people including a specific target have conducted in a similar ratio. Previous studies were contributed to expand the topics of universal design and it is time to study the applications based on previous research results for utilization and dissemination of universal design. Also it is necessary to conduct interdisciplinary studies in the field of universal design.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.134-134
• /
• 2022

Mungbean is used for not only seed but sprout, so, consumption of mungbean has been on the rise in Korea. Life cycle of mungbean tends to be short among Legume. For that reason, Mungbean can be harvested for various cropping system and season per regions and farmers regardless of sowing date and harvesting date. So, Prior research is needed about growth characters and life cycle of mungbean per sowing period. Mungebean cultivar 'Dahyun' and 'Sanpo' supplied by Korea Agriculture Technology Promotion Agency(KOAT) is cultivated in wagner pot. Sowing period is proper time of seeding in Jeollanam-do and Gyeongsangnam-do that is major cultivation region of mungbean in korea from early May to mid July every 2 weeks. Length at maturity stage tends to increase from early May(sowing date: 4^th May) to early July(sowing date: 5^th July), but after that, It tends to decrease from mid July(sowing date: 19^th July). Number of branches and nods shows a similar trend. Length of pod has no tendency and no difference per sowing date. Number of pod per plants has also no tendency per sowing date. Test plots sowing in late May has the most number of pods.(Sanpo 22.9pods, Dahyun 16.8) Number of seeds per pod tends to increase to late May and Test plots sowing in mid July has the most number of seed per pod. In case of sowing at early May, Days of emergence is 7d. its summation of temperature is 132.2℃. After that, it tends to decrease to mid June. After mid June, Days of emergence is fixed to 3d. Average temperature growing up in this season, Summation of temperature from sowing to emergence takes the lowest point in test plots sowing in mid June.(Sanpo 88.6℃, Dahyun 88.6) Days of flowering tends to fasten from early May to mid July. Two cultivar shows same level. Days of maturity tends to fasten to mid June, after that tends to slow. In case that many research results about growth characters and life cycle mungbean per sowing period are drawn, it is expected that it result in increase of cultivation area and income of farmer.

• 한국환경과학회지
• /
• 제18권11호
• /
• pp.1189-1197
• /
• 2009

The purpose of this research was develop tailored landslide hazard assessment table (LHAT) in Gyeongsangbuk-do Province and propose building strategies on environmental information system to estimate landslide hazard area according to LHAT. To accomplish this purpose, this research investigated factors occurring landslide at 172 landslide occurred sites in 23 city and county of Gyeongsangbuk-do Province and analyzed what factors effected landslide occurrence quantity using the multiple statistics of quantification method(I). The results of analysis, factors affecting landslide occurrence quantity were shown in order of slope position, slope length, bedrock, aspect, forest age, slope form and slope. And results of the development of LHAT for predict mapping of landslide-susceptible area in Gyeongsangbuk-do Province, total score range was divided that 107 under is stable area(IV class), 107~176 is area with little susceptibility to landslide(III class), 177~246 is area with moderate susceptibility to landslide(II class), above 247 area with severe susceptibility to landslide(I class). According to LHAT, this research built landslide attribute database and made 7 digital theme maps at mountainous area located in Goryeong Gun, Seongju-Gun, and Kimcheon-City. The results of prediction on degree of landslide hazard using environmental information system, area with little susceptibility to landslide(III class) occupied 65.56% and severe susceptibility to landslide(I class) occupied 0.51%.

• 대한수학교육학회지:수학교육학연구
• /
• 제27권2호
• /
• pp.207-225
• /
• 2017

학생의 학습기회를 형성하는 데 있어 교과서는 상당히 중요한 역할을 한다. 이를 고려하면 교과서 분석은 학생들에게 어떠한 학습 기회를 제공하는지 이해하는데 있어 중요하다. 본 연구는 초등학교 수학교과서를 학습 경로(learning trajectory)에 제시된 넓이와 부피 개념의 이해의 발달 단계에 비추어 분석하였다. 1~6학년의 수학교과서 속의 넓이와 부피에 관한 과제들을 그 과제를 해결하는데 요구되는 사고와 행동을 기초로 학습 경로에 제안 된 발달 단계를 이용하여 코딩하였다. 그 결과, 수학교과서 속의 과제와 학습 경로 간의 상당한 불일치를 발견하였다. 우선, 교과서는 학습 경로에 제안 된 나이보다 상당히 늦게 해당 학습 기회를 제공하였다. 또한, 넓이의 경우 5학년, 부피의 경우 6학년에 학습 기회가 집중되어 있었으며, 이런 집중된 학습 기회도 개념의 발달보다는 넓이 또는 부피의 공식을 적용하는데 중점을 두었다. 본 연구의 결과는 교과서 개발뿐만 아니라 수학수업에서 학생의 학습 기회를 확장시키는데 중요한 시사점을 제시한다.

• 한국언론정보학보
• /
• 제19권
• /
• pp.65-93
• /
• 2002

이 연구는 최근 들어 방송기술의 발달로 위성방송, 인터넷방송과 같이 전국성을 띠는 방송미디어가 속속 등장하면서 논란이 제기된 방송 권역 문제를 다루고 있다. 방송 권역의 문제는 위성방송 문제로 불거졌지만, 이 문제는 한국의 방송 철학과 이념에 대한 근본적인 문제를 제기하고 있다. 즉 방송 권역 문제는 새로운 미디어의 육성을 지향할 것인가? 커뮤니케이션 기술이 발달하더라도 지역문화, 지역언론의 역할을 중시해야 할 것인가? 등의 다양한 방송 이념과 관련 있기 때문이다. 이 연구에서는 방송 권역에 대한 기존의 논의를 평가한 뒤 방송 권역의 쟁점으로 방송 권역외 재송신, 위성방송 사업자의 지상파방송 재전송, 방송 권역의 광역화 등을 다루고 있다. 이 연구에서는 방송 권역의 목적이 기술적인 의미보다는 지역방송의 보호를 위해 유지되고 있으나, 방송 기술의 발전과 새로운 미디어의 등장으로 그 의미마저 상실되고 있음을 논의하고 있다. 따라서 방송 권역 개편을 통해 지역방송의 경쟁력을 강회하고 방송 권역과 관련된 방송사업자들의 문제를 풀어야 한다고 주장한다. 즉 디지털 멀티미디어 시대에 '방송 권역'의 의미를 재검토해야 한다고 주장하고 있다.