• 한국항해항만학회지
• /
• 제29권5호
• /
• pp.431-437
• /
• 2005

화물발생 예측을 위해 주로 이용된 방법은 교통존을 중심으로 한 공간단위의 접근기법이다. 또한 연구사례에 따라 물동량 전수화 방법에 차이가 있고 모형에 포함된 변수가 다른 경우가 많아 일관된 화물발생 예측에 어려움이 있다. 본 연구에서 시도한 물동량 단위 예측기법은 개별 사업체를 대상으로 유출${\cdot}$입하는 화물 물동량과 종업원수, 매출액, 연면적, 부지면적 등 사업체의 특성을 이용하여 사업체 단위로 화물발생을 예측하는 것으로 공간단위 접근기법보다 간편하고 다른 지역에 적용이 가능한 장점이 있다. 연구의 대상은 수도권에 소재한 사업체이며 매출액을 설명변수로 선정하여 회귀식을 추정하고 모형의 적합성을 검증하였다. 회귀모형의 형태는 지수형으로 매출액이 증가함에 따라 화물발생의 규모도 커지는 특징을 갖는다. 본 연구는 교통 존 단위가 아닌 사업체 단위로 화물발생을 예측하는 보다 미시적인 연구방법을 개발함에 의의가 있다.

• Asian Journal of Innovation and Policy
• /
• 제5권3호
• /
• pp.275-292
• /
• 2016

Many countries set growth engine technologies and industries for economic growth and job creation. Each country always wants to know their technological or industrial position in the world in these industries. This study aims at identifying the worldwide position of 19 growth engine industries defined in Korean government. The methods are quantitative by counting the number of startup companies in the world. The ORBIS database was used to extract the number. Therefore, this article may be the first research for the world appearance of growth engine industries and its comparison between world and G7, and between G7 countries. Also, this may be the first study using the ORBIS database on the analysis of certain technology industries. Further, we showed a method to identify world features of technology industries.

• 대한공업교육학회지
• /
• 제38권2호
• /
• pp.267-286
• /
• 2013

본 연구는 반도체 제조업 회사인 H사의 기업부설연구소를 대상으로 구성원에게 필요한 역량을 규명하였다. 포커스 그룹 인터뷰와 직무분석 자료를 바탕으로 비전을 확인하고 구성원이 직무를 수행하는데 필요한 역량을 확인했다. 또한 규명된 역량에 대해 설문을 통해 구성원이 인식하고 있는 역량별 중요도인식과 역량수준을 확인함으로써 개인과 조직의 역량을 향상시키기 위한 방법을 제안하였다. 인터뷰와 직무분석은 각자 그룹별, 내용별로 정리된 후 통합 분석되었고, 분석된 결과는 Spencer&Spencer의 역량사전과 선행연구에서 개발된 역량모델들과 비교분석을 거친 뒤 유목화되어 재분류하는 과정을 거쳤으며, 그 결과 16개의 역량이 도출되었고, 7개의 역량군으로 분류하였다. 이 연구는 이러한 결과를 근거로 H사 기업부설연구소가 필요한 역량을 규명하고 직무별로 요구되는 역량의 차이를 발견하였다. 또한 역량의 중요도 인식과 역량별 본인의 수준 인식 정도를 확인하여 연구인력에 대한 보다 적극적인 교육의 방식이나 다양한 종류의 교육을 제안했다.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1786-1795
• /
• 2015

It is common practice to identify the insulation faults of GIS through monitor the contents of SF₆ decomposed components. Partial discharges (PD) could lead to the decomposition of SF₆ dielectric, so new reactions usually occur in the mixture of the newly decomposed components including traces of H₂O and O₂. The new reactions also cause the decomposed components to differ due to the different amounts of H₂O and O₂ even under the same strength of PD. Thus, the accuracy of assessing the insulation faults is definitely influenced when using the concentration and corresponding change of decomposed components. In the present research, a needle-plate electrode was employed to simulate the PD event of a metal protrusion insulation fault for two main characteristic components SO₂F₂ and SOF₂, and to carry out influence analysis of trace H₂O and O₂ on the characteristic components. The research shows that trace H₂O has the capability of catching an F atom, which inhibits low-sulfide SF_x from recombining into high-sulfide SF₆. Thus, the amount of SOF₂ strongly correlates to the amount of trace H₂O, whereas the amount of SO₂F₂ is weakly related to trace H₂O. Furthermore, the dilution effect of trace O₂ on SOF₂ obviously exceeds that of SO₂F₂.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.55-64
• /
• 2016

The development of high-speed rail (HSR) has had a major impact on the power supply grid. Based on the monitored waveforms of HSR, a pattern recognition approach is proposed for the first time in this paper to identify the operating conditions. To reduce the data dimensions for monitored waveforms, the principal component analysis (PCA) algorithm was used to extract the characteristics and their waveforms from the monitored waveforms data. The dynamic time wrapping (DTW) algorithm was then used to identify the operating conditions of the HSR. Cases studies show that the proposed approach is effective and feasible, and that it is possible to identify the real-time operating conditions based on the monitored waveforms.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1650-1653
• /
• 2002

In this paper, we propose the initial optimized structure of the Radial Basis function Networks that is simple in the part of the structure and fast converges more than neural networks with the analysis method using Time- Frequency Localization. We construct the hidden node with the Radial Basis functions their localization are similar with approximation target function in the plane of the Time and Frequency. We finally make a good decision of the initial structure for function approximation using genetic algorithm

• Corrosion Science and Technology
• /
• 제14권3호
• /
• pp.120-126
• /
• 2015

The usage of bending products recently have increased since many industries such as automobile, aerospace, shipbuilding, and chemical plants need the application of pipings. Bending process is one of the inevitable steps to fabricate the facilities. Induction heat bending is composed of compressive bending process by local heating and cooling. This work focused on the effect of induction heat bending process on the properties of ASME SA312 Gr. TP304 stainless steel pipes. Tests were performed for base metal and bended area including extrados, intrados, crown up, and down parts. Microstructure was analyzed using an optical microscope and SEM. In order to determine intergranular corrosion resistance, Double Loop Electrochemical Potentiokinetic Reactivation (DL-EPR) test and ASTM A262 practice A and C tests were done. Every specimen revealed non-metallic inclusion free under the criteria of 1.5i of the standard and the induction heat bending process did not affect the non-metallic inclusion in the alloys. Also, all the bended specimens had finer grain size than ASTM grain size number 5 corresponding to the grain sizes of the base metal and thus the grain size of the pipe bended by induction heat bending process is acceptable. Hardness of transition start, bend, and transition end areas of ASME SA312 TP304 stainless steel was a little higher than that of base metal. Intergranular corrosion behavior was determined by ASTM A262 practice A and C and DL-EPR test, and respectively step structure, corrosion rate under 0.3 mm/y, and Degree of Sensitization (DOS) of 0.001~0.075% were obtained. That is, the induction heat bending process didn't affect the intergranular corrosion behavior of ASME SA312 TP304 stainless steel.

• Corrosion Science and Technology
• /
• 제14권4호
• /
• pp.177-183
• /
• 2015

Prestressed Concrete steel Cylinder Pipe (PCCP) is extensively used as seawater pipes for cooling in nuclear power plants. The internal surface of PCCP is exposed to seawater, while the external surface is in direct contact with underground soil. Therefore, materials and strategies that would reduce the corrosion of its cylindrical steel body and external steel wiring need to be employed. To prevent against the failure of PCCP, operators provided a cathodic protection to the pre-stressing wires. The efficiency of cathodic protection is governed by the anodic performance of the system. A mixed metal oxide (MMO) electrode was developed to meet criteria of low over potential and high corrosion resistance. Increasing coating cycles improved the performance of the anode, but cycling should be minimized due to high materials cost. In this work, the effects of $RuCl_3$ concentration on the electrochemical properties and lifespan of MMO anode were evaluated. With increasing concentration of $RuCl_3$, the oxygen evolution potential lowered and polarization resistance were also reduced but demonstrated an increase in passive current density and oxygen evolution current density. To improve the electrochemical properties of the MMO anode, $RuCl_3$ concentration was increased. As a result, the number of required coating cycles were reduced substantially and the MMO anode achieved an excellent lifespan of over 80 years. Thus, we concluded that the relationship between $RuCl_3$ concentration and coating cycles can be summarized as follows: No. of coating cycle = 0.48*[$RuCl_3$ concentration, $M]^{-0.97}$.

• Corrosion Science and Technology
• /
• 제16권1호
• /
• pp.31-37
• /
• 2017

A synergistic effect was observed in the combination of nitrite and ethanolamines. Ethanolamine is one of the representative organic corrosion inhibitors and can be categorized as adsorption type. However, nitrosamines can form when amines mix with sodium nitrite. Since nitrosamine is a carcinogen, the co-addition of nitrite and ethanolamine will be not practical, and thus, a non-toxic combination of inhibitors shall be needed. In order to maximize the effect of monoethanolamine, we focused on the addition of molybdate. Molybdate has been used to alternate the addition of chromate, but it showed insufficient oxidizing power relative to corrosion inhibitors. This work evaluated the synergistic effect of the co-addition of molybdate and monoethanolamine, and its corrosion mechanism was elucidated. A high concentration of molybdate or monoethanolamine was needed to inhibit the corrosion of ductile cast iron in tap water, but in the case of the co-addition of molybdate and monoethanolamine, a synergistic effect was observed. This synergistic effect could be attributed to the molybdate that partly oxidizes the metallic surface and the monoethanolamine that is simultaneously adsorbed on the graphite surface. This adsorbed layer then acts as the barrier layer that mitigates galvanic corrosion between the graphite and the matrix.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.234-235
• /
• 2015

In South Korea, small photovoltaic equipment is increasingly adopted in more detached houses on the constant basis. With this broader use of small photovoltaic equipment, its systematic maintenance becomes all the more necessary. However, photovoltaic facility maintenance has been concentrated solely on large-scale solar energy generation plants in the country while hardly covering smaller facilities. In this research, the JEM rule and extant maintenance company services were analyzed to develop a proper maintenance model for small photovoltaic equipment. The maintenance service procedures designed herein are as follows: A small photovoltaic equipment user chooses a maintenance company and signs a contract. Once a contract is made, the Korea Energy Management Corporation provides a certain kind of incentive to the company. The company provides maintenance service to the user and receives a service fee. If such a maintenance service model is in place, small photovoltaic equipment efficiency is expected to increase and users could receive systematic maintenance services. Also the new creation of small photovoltaic equipment maintenance service would form a new market to generate more jobs for the society.