• Journal of Biosystems Engineering
• /
• v.39 no.4
• /
• pp.283-289
• /
• 2014

Purpose: This study was carried out to evaluate the labor requirement and the cost-reducing effects of the pick-up type pulse crop harvester compared with those of conventional harvesting for soybeans and red beans. Methods: The labor requirement and the cost to gather, thresh, and clean for conventional harvesting operations were surveyed; those for the pick-up type pulse crop harvester were estimated for soybeans and red beans. The annual capacity of the harvester and the break-even area of the two harvesting methods were also estimated. Results: For soybean harvesting, the labor requirement of 0.57 hour-persons/10 a for the pick-up type pulse crop harvester reflects a 91.9% reduction in the labor requirement of 7.00 hour-persons/10 a for conventional harvesting. Machinery costs of 51,300 won/10 a for the harvester were estimated for an annual harvesting area of 52.5 ha/year, representing a reduction of 33.3% from the 78,700 won/10 a cost of conventional harvesting. A break-even area of 28.4 ha was estimated for the two harvestings. For red bean harvesting, the labor requirement of 0.57 hour-persons/10 a for the harvester reflects a 92.6% reduction in the labor requirement of 7.66 hour-persons/10 a for conventional harvesting. For an annual harvesting area of 52.5 ha/year, annual capacity of 52.5 ha/year and machinery costs of 51,700 won/10 a were estimated for the harvester, reflecting a reduction of 44.7% in the cost of 93,500 won/10 a for conventional harvesting. A break-even area of 23.1 ha was estimated for the two harvestings. A governmental subsidy for purchasing the harvester could contribute to reducing the break-even area and harvesting costs. Conclusions: The pick-up type pulse crop harvester for soybean and red bean harvesting could reduce the labor requirement and costs of conventional harvesting, and a governmental subsidy for purchasing the harvester will improve the economics of the harvester for efficient mechanical harvesting.

• Journal of International Academy of Physical Therapy Research
• /
• v.8 no.2
• /
• pp.1135-1141
• /
• 2017

Stress and fatigue are general physical aspects of our daily lives. It has been shown that physical therapists have different levels of job stress and fatigue according to the type A/B behavior patterns. This study collected data from 212 physical therapists between October 28 and November 23, 2016 using an anonymous, self-administered questionnaire. The study results showed the proportion of physical therapists with the Type A behavior patterns(TABP) was 18% greater than that of physical therapists with the Type B behavior patterns(TBBP). In this study, physical therapists with TABP were compared with physical therapists with TBBP. The results indicated that physical therapists with TABP were more inclined to experience higher levels of overall job stress and fatigue from the following stress factors: physical environment, job requirement, and job autonomy. Therefore, the stronger the tendency toward TABP, the stronger the feeling of job stress and fatigue from physical environment, job requirement, and job autonomy. Those with a tendency toward TBBP showed positive correlations between job requirement and the total job stress score; thus, the stronger the tendency toward TBBP, the stronger the feeling of overall job stress and fatigue from job requirement. This study suggests that it is necessary to manage the job stress and fatigue of physical therapists with both TABP and TBBP and to manage the job stress and fatigue of physical therapists with the type A behavioral pattern.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.2
• /
• pp.156-162
• /
• 2011

To evaluate the bonding performance of reinforced glulam, the textile type of glass fiber and aramid fiber, and the sheet type of glass fiber reinforced plastic (GFRP) and carbon fiber reinforced plastic (CFRP) were used as reinforcements. The reinforced glulam was manufactured by inserting reinforcement between the outmost and middle lamination of 5ply glulam. The types of adhesives used in this study were polyvinyl acetate resins (MPU500H, and MPU600H), polyurethane resin and resorcinol resin. The block shear strengths of the textile type in glass fiber reinforced glulam using MPU500H and resorcinol resin were higher than 7.1 N/$mm^2$, and these glulams passed the wood failure requirement of Korean standards (KS). In case of the sheet types, GFRP reinforced glulams using MPU500H, polyurethane resin and resorcinol resin, and CFRP reinforced glulams using MPU500H and polyurethane resin passed the requirement of KS. The textile type of glass fiber reinforced glulam using resorcinol resin after water and boiling water soaking passed the delamination requirement of KS. The only GFRP reinforced glulam using MPU500H after water soaking passed the delamination requirement of KS. We conclude that the bonding properties of adhesive according to reinforcements are one of the prime factors to determine the bonding performance of the reinforced glulam.

• Korean Journal of Occupational Health Nursing
• /
• v.27 no.2
• /
• pp.131-138
• /
• 2018

Purpose: The purpose of this study was to examine the differences in requirement and activity related to workers' health promotion according to business type and enterprise size. Methods: This study is a secondary analysis of data extracted from a survey on the Enterprise Health Promotion Index. For the present analysis, 7,784 companies were selected. Results: Requirements for lifestyle management and activities to prevent musculoskeletal disorders were the highest. The requirement and activity of musculoskeletal disorders and cerebrovascular disease were high in the manufacturing industry. Meanwhile, in the non-manufacturing industry, the requirement and activity of job stress management were high. Small-sized companies had a high requirement to prevent musculoskeletal disorders and cerebrovascular disease. Conclusion: Government support should be strengthened in workers' lifestyle management. Additionally, workers' health promotion in small-sized companies needs to focus on preventing musculoskeletal disorders and cerebrovascular disease.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.169-170
• /
• 2011

In the connection of green frame, the bottom rebar of the precast concrete beam needs joint or anchorage to ensure structural integrity. However, given the characteristics of composite precast concrete joint, enough length over which rebar can be anchored or lap-spliced is not secured. In addition, due to issues with constructability, cost or quality, it is difficult to apply welding or mechanical connection techniques. Therefore, this study analyze the requirement for a bolt-type rebar coupler as a solution for the coupling issue between the lower rebars of green frame beam. The requirement for bolt-type rebar coupler proposed herein will provide basic data for development studies of the rebar coupler.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.565-568
• /
• 2006

This study was retentive material into the porosities of the permeable asphalt concrete, we developed retentive asphalt concrete which can absorb water in rain and decrease the temperature of the pavement through the vaporization of rainwater. The experimental results showed that the maximum stability appeared in the 5.0% types of both AP-5 and SBS PMA. Between these two types, the maximum stability of the asphalt with AP-5 was 480kg, which means it met the stability requirement for walkways but didn't meet the requirement for roadways. On the other hand, the maximum stability of the asphalt concrete with SBS PMA was 676kg, which was 176 kg higher than the requirement for roadways(500kg) and satisfy the requirement of KS. The retentive material was 56.4% in the type of the retentive material with 30% diatomaceous earth, 66.6% in 50% type, 87.5% in 70% type. In the aspect of thermal properties, the retentive asphalt concrete can lower the surface temperature by about 15 degrees lower than the normal asphalt concrete can. This effect could be made by the evaporation cooling effect and the surface albedo. It should be noted that the evaporation cooling effect cools it by about 10 degrees and the surface albedo by about 5 degrees.

• Journal of Nutrition and Health
• /
• v.39 no.7
• /
• pp.641-648
• /
• 2006

This study was designed to evaluate the effect of the individual nutrition education for type 2 diabetes who participate the diabetes buffet. The subjects were 66 patients and divided into education (n=34) and control groups (n=32). The mean age of education and control groups were 59.8 and 56.6 years old, respectively. There were no differences in age and body mass index (BMI) between two groups. Initial glycosylated hemoglobin (HbA1c), post prandial plasma glucose (PP2), total plasma cholesterol, and blood pressure were not different between two groups. But fasting blood sugar (FBS) was higher in education group than in control group. On completion of the study, the education group showed significant decreases in body weight, BMI, FBS and PP2, however, the control group showed no changes in body weight, BMI and PP2, and showed a significant increase in FBS. Initial calorie and protein intakes of the education group did not meet the prescribed amount, however, mineral and vitamin intakes were higher than estimated average requirement (EAR). By the end of study, calorie and protein intakes were significantly increased to meet the prescription. In order to evaluate the effect of diet education, awareness of calorie requirement was used as an index of understanding diet prescription. The degree of awareness of calorie requirement was dependent on age: younger patients showed higher awareness than older subjects. The subject who showed better understanding of diet prescription showed lower levels of HbA1c, FBS, and PP2 at the end of the experiment period. The results of this study clearly show that individual diabetes diet education is effective to make the patient understand their diet prescription, and is effective to control body weight and blood sugar level. Awareness of calorie requirement could be used as an index of understanding of prescribed diet. Since age is an important variable to determine the awareness of calorie requirement, different strategies of nutrition education should be developed for different age groups, especially patients over 70 years old.

• Journal of Families and Better Life
• /
• v.16 no.1
• /
• pp.81-94
• /
• 1998

The purpose of this study is to examine men's role conflicts of dual-earner family based on man's role type. Man's role type is composed of man's sex role attitude and family-role performance and categorized in four types such as traditionalism type neo-traditionalism type equalitarianism type and inconsistancy type. The test analysis can be summarized as follows; First test analysis can be summarized as follows; role performance and man's role conflict as working hours is long wife's role requirement is high family-role conflict as working hours is long wife's role requirement is high family-role is not commit man's role conflict directly affected. In addition indirect affect through family-role performance shows that man's role conflict level is low as level of income is high level of income difference between man and wife is low child is younger and intent to modern sex-role attitude. Second looking into the difference role conflict to man's role type it shows that equalita ianism type's role conflict is low and man's role conflict in traditionalism and neo-traditonalism types is high.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.805-808
• /
• 2005

This paper is a study on an optical bench satisfying stiffness and thermal pointing error requirements for LEO earth observation satellite. According to shape and stiffness requirements, optical bench type 1 is designed. Because type 1 does not satisfy the thermal pointing error requirement, an optical bench type 2 is suggested. Although the type 2 has better results than type 1, it still does not meet the thermal pointing error requirement. Using the results of optical bench type 1&2, the optical bench type 3 is finally designed, which satisfies both the stiffness and thermal pointing error requirements.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.21-21
• /
• 1998

추력방향 제어시스템 설계에 있어서 가장 기본적으로 요구되는 Requirement는 Rocket Motor의 추력, 요구되는 최대 Side Force, Rocket Motor의 외경, System의 총 구동시간, 구동후의 분리여부 등이다. 이러한 Requirement를 만족하기 위해서는 Nozzle 출구의 분출가스 물성치로부터 초음속 유동해석을 통하여 Vane 주위의 속도, 온도, 압력 분포를 구하고, Vane의 받음각 변화에 대한 Aerodynamic Force와 Moment를 계산하고, Side Force를 만족하는 최대 받음각의 결정, Torque를 만족하는 감속기와 Motor의 선정 및 Housing 기본 형상을 설계하였다. 금번 개발에서는 지상 시험용으로서 안전 계수를 Flight Model보다 약간 높게 설계하였으며, 작동 완료 후 System이 Nozzle로부터 떨어져나가는 분리시스템은 포함하지 않았다.