• 정보처리학회논문지D
• /
• 제17D권1호
• /
• pp.41-52
• /
• 2010

생성된 테스트 케이스와 요구사항과의 연관관계가 중요하지만, 모델을 이용한 테스트 케이스 자동생성에서는 모델이 요구사항과 m:n의 관계를 맺기 때문에 테스트 케이스와 요구사항과의 관계도 매우 복잡해진다. 본 논문에서는 1:1 모델링 도구인 REED(REquirement EDitor)를 이용하여 테스트 케이스를 생성하는 방법에 대하여 기술한다. 테스트 케이스는 커버리지 타겟 생성, IORT(Input Output Relation Tree) 생성, 테스트 케이스 생성의 3단계를 거치며, 모든 단계는 자동으로 진행된다. 생성된 테스트 케이스는 하나의 요구사항에서 생성될 수 있으며 실제 시스템에 적용한 결과, 온도조절장치 경우는 5,566개, 버스카드 단말기의 경우는 3,757개, 굴착기 제어기는 4,611개의 테스트 케이스가 생성되었다.

• Journal of Biosystems Engineering
• /
• 제12권1호
• /
• pp.31-38
• /
• 1987

In order to improve the traditional post harvest system in Korea, a model for mechanized rice drying and storage system was developed and introduced as the first part of the study(Park, 1986). As the second part of the study, capital requirement and cost of the model system was analyzed. Also, optimum size of the model system was estimated by comparing with the traditional harvest system. From the study, the following results can be concluded: 1. The capital requirement of the model system decreases as the model size increases. For example, a model system having 500 ton storage capacity requires 439,000 Won/ton. However it requires 313,200 Won/ton only, if the model size increases to 1000 ton. 2. Also, total cost of the model system decreases as the model size increases. For example, total costs of the model system having 500 ton and 1000 ton storage capacity are 101,208 Won/ton and 69,320 Won/ton, respectively. 3. The breakeven point (optimum size) of the model can be estimated around 630 ton storage capacity if the operation rate is assumed as 100%. However, the optimum size of the model is 710 ton, if the operation rate it assumed 80%.

• 대한조선학회논문집
• /
• 제48권3호
• /
• pp.207-214
• /
• 2011

Ship design requirements described in the building specification should be reflected in the design process. This paper identifies the configuration of requirements mentioned in the building specification using Ontology Representation Language (OWL). Ontology-based semantic search system specifies the requirement items. Through this extraction, building specifications mentioned for each entry are configured to the tree. Tracking requirements for ship design and a set of procedures to instruct is also used for the V model of systems engineering. The semantic search engine of robot agent and ontology can search the requirements specification document and extract the design information. Thereafter, design requirements for the tracking model that proposes the relationship between the associated BOM(bill of material) and product structure.

• 한국농공학회논문집
• /
• 제46권1호
• /
• pp.3-13
• /
• 2004

For optimal irrigation reservoir operation during flood and normal period, a general and systematic policy is suggested to make balance of the conflicting purposes between water conservation and flood control. We developed Open Water Management Program (OWMP) with an open architecture to deal with newly arising upgrade problems for optimal management of irrigation reservoir. And we evaluated the applicability of OWMP to estimate daily runoff from an agricultural watershed including irrigation reservoirs, and analyzed behaviour of irrigation reservoirs as irrigation water requirements considering frequency analysis of reservoir storage and frequency analysis water requirements for effective management of reservoir. When we executed OWMP with data produced from an experimental field, IHP basins, the mean relative errors of application of daily runoff and irrigation water requirement were less than 5％. We also applied OWMP to a Seongju irrigation reservoir to simulate daily runoff, storage and water requirement from 1998 to 2002, and the mean model efficiency between measured and simulated value was 0.76. Our results based on the magnitude of relative errors and model efficiency of the model simulation indicate that the OWMP can be a tool nicely adapted to the effective water management of irrigation reservoir for beneficial water use and flood disaster management.

• 농촌계획
• /
• 제28권4호
• /
• pp.105-117
• /
• 2022

This study tested SVM(support vector machine), RF(random forest), and ANN(artificial neural network) machine-learning models that can predict net irrigation water requirements in paddy fields. For the Jeonju and Jeongeup meteorological stations, the net irrigation water requirement was calculated using K-HAS from 1981 to 2021 and set as the label. For each algorithm, twelve models were constructed based on cumulative precipitation, precipitation, crop evapotranspiration, and month. Compared to the CE model, the R² of the CEP model was higher, and MAE, RMSE, and MSE were lower. Comprehensively considering learning performance and learning time, it is judged that the RF algorithm has the best usability and predictive power of five-days is better than three-days. The results of this study are expected to provide the scientific information necessary for the decision-making of on-site water managers is expected to be possible through the connection with weather forecast data. In the future, if the actual amount of irrigation and supply are measured, it is necessary to develop a learning model that reflects this.

• Asia pacific journal of information systems
• /
• 제12권4호
• /
• pp.101-120
• /
• 2002

Risk management or risk-based approach of software project management was developed to explain the effects of requirement uncertainty, control standardization, interactions on software quality. Based on a prior theory, five hypotheses were derived and empirically tested using a survey design. Data from 117 members in 3 SI companies support for the path model, and three of five hypotheses. The results showed that decreases in requirement uncertainty and increases in control standardization were directly associated with increases in the interactions between user and project teams, which, in turn, led to increases software quality. The findings suggested that the direct effect on software quality is primarily due to the interactions between user and project teams, rather than requirement uncertainty and control standardization.

• 한국CDE학회논문집
• /
• 제7권1호
• /
• pp.42-56
• /
• 2002

Presented in this study is a top-down functional requirement analysis procedure and the desired functionalities for PDM system development, and the benefits of top-down approach over a conventional bottom-up approach is also shown. For the purpose of top-down requirement analysis for PDM system, this study proposes 4P modeling view. 4P modeling view is defined as a modeling perspective for classifying functional requirements and integrating product-related information objects that must be man-aged within PDM systems. Based on 4P modeling templates, benchmarking analysis of commercially major PDM products is conducted and as a result of this analysis, this study suggests desired functionalities for PDM system.

• 한국IT서비스학회지
• /
• 제8권1호
• /
• pp.113-124
• /
• 2009

Value-based requirements engineering process, called The ViRE(Value-Innovative Requirement Engineering) was suggested to create an uncontested market using ERRC(Eliminate, Reduce, Raise, Create) requirements analysis. But ViRE did not provides a quantitative data analysis method for ERRC decision so as to make objective decisions for customers. In this paper, to solve this problem, we suggest a quantitative ERRC analysis method by estimating requirements cost. Our method defines user requirements and decides their weight. Then, it makes quality level table for all the identified requirements and function modules and estimate implementation cost based on their quality levels. Finally, assess each requirement's impact and then evaluate ERRC value. We could get the more objective ERRC values by evaluate the requirement weight. functional module weight, and implementation cost. And we proved the efficiency of our model by a case study, smart student ID system.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.635-641
• /
• 2007

The construction starts its business by receiving the order from client and owner. The client presents requirements and related information so that the desired result can come out while the designer and the builder express and implement the building according to set objectives and goals of project based on information on project environment and presented requirements. Because the construction project makes decisions on such objectives at its early stage and previous stage becomes the situation for decision making of next stage as the computation to implement decisions get performed. Accordingly, this study has mentioned necessity of requirement analysis and systematization of construction project, analyzed the work of construction's early stage and resented a plan for objective of construction project requirement definition model in which requirements engineering has been applied and using it while making decisions on designing.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.464-471
• /
• 2009

Robot and application of IT skill of construction industry are slow comparatively than another thing industry by the feature. This research proposes progress management and real time information gathering through construction automation and RFID focused on steel structure construction. Building for RTPM system, must consider various variables and surrounding situation in construction field and it is the most important and difficult matter that draw right requirement and grasp relation between this requirements to accomplish one suitable task considering these environment. Therefore, in this study analyzes requirement and target for RTPM system based on scenario that is easy to draw requirement and apply this to use case model. Presented method suggests that represent relation between goals and way that refines goal systematically from requirement of RTPM system. And it could express for visualization through the Way that attaches nonfunctional elements of system with system internal goal.