• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.10
• /
• pp.1428-1433
• /
• 2014

In this paper, we propose the formation control algorithm using the leader-following robots in given space. The proposed method is as follows: First, we plan a path of the leader robot for the obstacle avoidance. After that, we propose the formation control algorithm of the following robots using the position and the orientation angle of the leader robot. Also, we propose method for adjusting the formation of the swarm robots when the following robots detect an obstacles. Finally, we show the effectiveness and feasibility of the proposed method though some simulations.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.4
• /
• pp.158-164
• /
• 2016

Currently, identifying a new carbon-free energy resource is important in order to resolve the global warming problem. Along the same line, this paper studied how to convert magnetic force into mechanical force and a new basic mechanism of converting magnetic force into mechanical force was identified. Long-term reliability test, around 15 million times, was also conducted at $-1^{\circ}C{\sim}27^{\circ}C$ to evaluate the durability of magnetic force. As a result, tests showed that the deviation of the mechanical force was within 0.8% of the initial force, and the relation between repulsive force (P) and ambient temperature (T) was formulated in a linear equation P = -0.175T+78.945.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.1
• /
• pp.45-52
• /
• 2016

One commercial package for magnetic analysis was used to apply repulsive forces of permanent magnetics to bicycle cushion system. Reliabilities of finite element analysis were acquired by comparing with those of experimental measurements. Equivalent spring stiffnesses corresponding to various sizes of magnetics were implemented into the bicycle dynamic model with three degree of freedom. Input force caused at front and rear wheels due to road unevenness was considered in the dynamic model. Dynamic behaviors were observed in terms of vertical displacements of the rider and the front reach as well as pitching displacement of the mass center when the bicycle ran over half-triangular bump. The methodology suggested in this paper by the finite element analysis and numerical model will be an useful tool for more accurate prediction of cushion design for any vehicle system if magnetic forces are utilized.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.781-784
• /
• 2002

Adhesion phenomenon is more significant for smaller objects, because adhesional force is proportional to size of the objects while gravitational force is proportional to the third power of it. For the purpose of microassembly, theoretical understanding is required for the Adhesion phenomenon. Authors have developed a force measurement system in an ultra-high vacuum chamber of Auger electron spectroscopy. The force between arbitrary combination of materials can be measured at a pressure less than 100 nPa after and before Ar ion sputtering and chemical analysis for several atomic layers of the surface. The results are successfully interpreted with a theory of contact mechanics. Since surface energy is quite important in the interpretation, electronic theory is used to evaluate the surface energy. In the manipulation of small objects, the adhesional force is always attractive. Repulsive force is essential for the manipulation. It can be generated by Coulomb interaction. The voltage required for detachment is theoretically analyzed and the effect of boundary conditions on the detachment is obtained. The possibility and limitations of micro-manipulation using both the adhesion phenomenon and Coulomb interaction are theoretically clarified. Its applicability to nano-technology is found to be expected.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1438-1445
• /
• 2002

For robotic endoscope, some researchers suggest pneumatic actuators based on inchworm motion. But, the existing endoscopes have not been replaced completely because human intestine is very sensitive and susceptible to damage. We design and test a new locomotion of robotic endoscope that allows safe maneuverability in the human intestine. The actuating mechanism is composed of two solenoids at each side and a single permanent magnet. When the current direction is reversed, repulsive force and attractive at the opposition side propels permanent magnet. Impact force against robotic endoscope transfers momentum from moving magnet to endoscope capsule. The direction and moving speed of the actuator can be controlled by adjustment of impact force. Modeling and simulation experiments are carried out to predict the performance of the actuator. Simulations show that force profile of permanent magnet is the dominant factor for the characteristic of the actuator. The results of simulations are verified by comparing with the experimental results.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.349-352
• /
• 1988

A problem of the surface friction is inevitable in the micro machines. However, the levitation by Meissner effect of high Tc superconductor gives a complete solution to the problem. The repulsive force between permanent magnets and superconductors is utilized to levitate and actuate micro structures without the surface friction. In this paper, a micro actuator using; Meissner effect of high Tc superconducting film (Meissnac) is proposed ; Meissnac is drived by the control of (Sugerconducting/ Normal) states of superconductor. The levitating force and the driving force are analyzed by the numerical method.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1856-1857
• /
• 2006

The existing automation transfer systems such as AGV(Automated Guided Vehicle) have many problems (maintenance, accuracy, velocity, etc.) and wastes of a vast space and time. Hence we have suggested to LMTT(Linear Motor-based Transfer Technology). This paper deals with fundamental LMTT, and proposes a concept of mass reduction and propulsion control for LMTT when it is starting and reaching an object by using lift-force. By applying optimal controller and the repulsive lift forte in the LMTT, a large percent of vehicle weight is compensated and it reduces friction, then it needs less thrust force to propel the vehicle.

• Journal of Aerospace System Engineering
• /
• v.2 no.3
• /
• pp.24-28
• /
• 2008

Eddy current are induced when a nonmagnetic, conductive material is moving as the result of being subjected to the magnetic field, or if it is placed in a time-varying magnetic field. These currents circulate in the conductive material and are dissipated, causing a repulsive force between the magnet and conductor. Using this concept, eddy current damping can be used as a form of viscous damping. This paper investigated analytically and experimentally the characteristics of an eddy current damping when a permanent magnet is placed in a conductive tube. The theoretical model of the eddy current damping is developed from electromagnetics and is verified from Maxwell program and experiments. From these comparisons, although predictability is not accurate at high excitation frequencies, the present model can be used to predict damping force at low excitation frequencies. In order to improve the prediction of the characteristics of an eddy current damping, the induced magnetic flux densities have to be considered in following researches.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.12
• /
• pp.1227-1233
• /
• 2011

An effective method of obstacle avoidance for omni-directional mobile robots is proposed to avoid moving obstacles in dynamic environments. Our method uses the concept of circle lists which represent the trajectories of robot and obstacles. This method predicts not only collision position but also collision time, and hence it enables the robot avoiding the most urgent collision first. In order to avoid obstacles, our method uses artificial repulsive force and contraction force. Simulation results show that the robot could avoid obstacles effectively.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.923-925
• /
• 2008

As known generally, when permanent magnets whose poles are upward and downward in order, arranged into the circumferential direction rotate under the conducting plate, the rotating force acts on the plate as well as the repulsive force. If the magnetic field by the magnet wheel(the above rotating permanent magnets) is partially shielded, the magnet wheel over open region can be a linear induction motor. The distinct feature from induction motor is that the traveling magnet field is produced by the moving permanent magnet instead of ac current. Furthermore, a variation of the open region changes the direction of the thrust force. In this paper, we introduce a concept of the linear actuator using the magnet wheel. Under the above shielding condition, a few simulation results and its verification from a simple test setup are described.