• Journal of Korea Water Resources Association
• /
• v.36 no.1
• /
• pp.23-32
• /
• 2003

This study aims at the derivation of representative IUH considering geomorphological factors. Nash model has been combined with geomorphological IUH to estimate the parameters of representative IUH. For this purpose, total 18 storm events which have been recorded upstream parts of Sangye control point in Bocheong river watershed, one of the tributary of Keum river basin, have been analysed. The results show that n value is 3.17 and K value is 7.01. And the results also show that IUHs driven by the method of moments vary with each storm events significantly. As a result of this study the IUH could be median distribution which is representative IUH among each storm events. It is believed that this result considered geomorphological factors is more superior and physically meaningful comparing with the existing methods.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.199-212
• /
• 2020

A large percentage of maritime accidents in coastal seas are related to small fishing vessels. In order to investigate causes of maritime accidents, it is often necessary to carry out dynamic simulations for the estimation of trajectories and motions of vessels. Initial conditions of vessels such as main dimensions, loading conditions and hydrostatic properties are required for the accurate simulations. Small fishing vessels usually have few records of hydrostatic properties during their fishing operations. Therefore, in this study, estimation procedures for hydrostatic properties of small fishing vessels are proposed. At first, hull form characteristics of Korean small fishing vessels are investigated. Most of vessels have hard-chines and centerline skegs, they have similar hull forms. Bonjean curves of several small fishing vessels whose gross tonnages are below 10 tons are normalized with vessel breadths and depths. Representative bonjean curves are derived from normalized bonjean curves, and a representative hull plan is obtained as well. If the vessel loading conditions such as total weights and centers of gravity are given, fore and aft drafts can be calculated by using the representative bonjean curves with the constraint that weights and buoyancies are in equilibrium. Metacentric heights are also estimated by using the representative hull plan. Drafts and metacentric heights estimated by proposed iterative estimation procedures are compared with actual vessel data, estimated values are in good agreements with actual values. In addition, normalized fore and aft drafts, metacentric heights of vessels can be formulated as the linear functions of normalized total weights and centers of gravity. Empirical formulas of drafts and metacentric heights are proposed, and it is confirmed that the empirical formulas also provide reasonable results, which are similar to the results by iterative estimation procedures with representative bonjean curves and hull plan.

• Safety and Health at Work
• /
• v.15 no.1
• /
• pp.42-52
• /
• 2024

Background: The lack of headforms that accurately reflect the head characteristics of Koreans and the demographic composition of the Korean population can lead to inadequate FFR testing and reduced effectiveness of FFRs. Method: Direct measurements of 5,110 individuals and 3D measurements of 2,044 individuals, aged between 9 and 69 years, were sampled from the data pool of Size Korea surveys based on the age and gender ratios of the Korean resident demographics. Seven head dimensions were selected based on the ISO 16976-2, availability of Size Korea measurements, and their relevance to the fit performance of FFRs. A principal component analysis (PCA) was performed using the direct measurements to extract the main factors explaining the head characteristics and then the main factors were standardized and remapped to 3D measurements, creating five size categories representing Korean head shapes. Lastly, representative 3D headforms were constructed by averaging five head shapes for each size category. Results: The study identified two main factors explaining Korean head characteristics by the PCA procedure specified in ISO 16976-2 and developed five representative headforms reflecting the anthropometric features of Korean heads: medium, small, large, short & wide, and long & narrow. Conclusion: This study developed representative headforms tailored to the Korean population for conducting total inward leakage (TIL) tests on filtering facepiece respirators (FFRs). The representative headforms can be used for TIL testing by employing robotic headforms to enhance the performance of FFRs for the Korean target population.

• Journal of the Korean Society for Library and Information Science
• /
• v.58 no.2
• /
• pp.177-198
• /
• 2024

Article 22(1) of the Library Act, which was completely revised in December 2006, stipulated that regional representative libraries are statutory organizations, and Article 25(1) of the Library Act, which was revised again in late 2021, renamed them as metropolitan representative libraries and expanded their duties. The reason why cities and provinces are required to specify or establish and operate metropolitan representative libraries is that in addition to their role as public libraries for public information use, cultural activities, and lifelong learning as stipulated in Article 23 of the Act, they are also responsible for the legal works of metropolitan representative libraries as stipulated in Article 26, and lead the development of libraries and knowledge culture by serving as policy libraries, comprehensive knowledge information centers, support and cooperation centers, research centers, and joint preservation libraries for all public libraries in the city or province. Therefore, it is necessary to analyze and diagnose whether the metropolitan representative library has been faithfully fulfilling its legal works for the past 15 years(2009-2023), and whether it is properly providing the results of its statutory planning and implementation on its website to meet the digital and mobile era. Therefore, this study investigated and analyzed the performance of the metropolitan representative library for the last two years based on the current statutory tasks and evaluated the extent to which it provides them through its website, and suggested complementary measures to strengthen its web services. As a result, it was analyzed that the web services for legal works that the metropolitan representative library should perform are quite insufficient and inadequate, so it suggested complementary measures such as building a website for legal works on the homepage, enhancing accessibility and visibility through providing an independent website, providing various policy information and web services (portal search, inter-library loan, one-to-one consultation, joint DB construction, data transfer and preservation, etc.), and ensuring digital accessibility of knowledge information for the vulnerable.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2012

This study investigates an application of the Hamming network-dual extended Kalman filter (DEKF) based on pattern recognition for high accuracy state-of-charge (SOC)/capacity estimation and state-of-health (SOH) prediction at various temperatures. The averaged nine discharging/charging voltage-temperature (DCVT) patterns for ten fresh Li-Ion cells at experimental temperatures are measured as representative patterns, together with cell model parameters. Through statistical analysis, the Hamming network is applied to identify the representative pattern that matches most closely with the pattern of an arbitrary cell measured at any temperature. Based on temperature-checking process, model parameters for a representative DCVT pattern can then be applied to estimate SOC/capacity and to predict SOH of an arbitrary cell using the DEKF. This avoids the need for repeated parameter measuremet.

• Journal of Environmental Science International
• /
• v.29 no.1
• /
• pp.25-32
• /
• 2020

The determination of soil parameters is important in predicting the simulated surface runoff using either a distributed or a lumped rainfall-runoff model. Soil characteristics can be collected using remote sensing techniques and represented as a digital map. There is no universal agreement with respect to the determination of a representative parameter from a gridded digital map. Two representative methods, i.e., arithmetic and predominant, are introduced and applied to both FLO-2D and HEC-HMS to improve the model's accuracy. Both methods are implemented in the Yongdam catchment, and the results show that the former seems to be more accurate than the latter in the test site. This is attributed to the high conductivity of the dominant soil class, which is A type.

• International Journal of Contents
• /
• v.4 no.2
• /
• pp.24-28
• /
• 2008

In this paper, we propose a new approach for content-based video retrieval using non-parametric based motion classification in the shot-based video indexing structure. Our system proposed in this paper has supported the real-time video retrieval using spatio-temporal feature comparison by measuring the similarity between visual features and between motion features, respectively, after extracting representative frame and non-parametric motion information from shot-based video clips segmented by scene change detection method. The extraction of non-parametric based motion features, after the normalized motion vectors are created from an MPEG-compressed stream, is effectively fulfilled by discretizing each normalized motion vector into various angle bins, and by considering the mean, variance, and direction of motion vectors in these bins. To obtain visual feature in representative frame, we use the edge-based spatial descriptor. Experimental results show that our approach is superior to conventional methods with regard to the performance for video indexing and retrieval.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.41.3-41
• /
• 2002

Motion estimation using Full-Search(FS) and Block-Matching Algorithm(BMA) is often used in the case of moving object tracking by vision sensors. However these methods often miss the real-time vision data because these schemes suffer the heavy computational load. When the image size of moving object is changed in an image frame according to the distance between the camera of mobile robot and the moving object, the tracking performance of a moving object may decline with these methods because of the shortage of active handling. In this paper, the variable-representative block that can reduce a lot of data computations, is defined and optimized by changing the size of representative block accor...

• Journal of ILASS-Korea
• /
• v.5 no.2
• /
• pp.61-67
• /
• 2000

The interaction between chemistry and turbulence is treated by employing the Representative Interactive Flamelet (RIF) Model. The detailed chemistry of 114 elementary steps and 44 chemical species is adopted for the n-heptane/air reaction. In order to account for the spatial inhomogeneity of the scalar dissipation rate, the multi-RIF is used. The effect of the number of RIF on ignition delay is discussed in detail. Numerical results indicate that the present RIF approach successfully predicts the ignition delay time as well as the essential features of a spray auto-ignition process.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.10
• /
• pp.881-889
• /
• 2002

Mobility analysis for various mobile mechanisms including mechanisms with lack of geometric generality is performed. Joint screws are employed to find the sire of feasible joint motion space or each of independent loops of mobile mechanisms. Particularly, the concept of "representative screws" is introduced to represent the feasible motion spaces for subsets of joints belonging to either a loop or a sub-system consisting of several closed loops. Firstly. simplified joint model for each of low different typical wheels popularly employed in mobile robots is described. Then. mobility analysis fir various types of planar mobile robots and the Mars Rover mobile robot for navigation on the rocky road on Mars arc performed. It is confirmed that the obtained results in this study coincide with the previous ones which were obtained by suing imaginary Joints approach(1)pproach(1)