• 정보처리학회논문지C
• /
• 제16C권1호
• /
• pp.65-72
• /
• 2009

모바일 장치의 증가와 무선 네트워크 기술의 발전으로 인해 새롭게 모바일 애드혹 네트워크에 대한 관심이 증가하고 있다. 최근까지의 연구는 데이터 접근성(Accessibility) 향상을 위해 데이터 복사본 활용이 효율적임을 증명하였다. 그러나, 데이터 복사본이 모바일 애드혹 네트워크에서 활용되기 위해서는 원본과 복사본 사이에 일관성(Consistency)이 확보되어야만 한다. 기존의 연구에서 사용되고 있는 일관성 확보 기법은 원본을 가진 노드에게 복사본 사용 노드들이 매번 일관성을 가지는지 확인하는 기법이 활용되었다. 그러나, 시간제약을 가지는 응용의 경우 원본을 가진 노드에게 확인하는 기법은 효율적이지 못하거나 때로는 심각한 문제를 일으킬 수도 있다. 본 논문에서는 시간제약응용을 위한 캐쉬 무효화 기법을 제안하고 있다. 제안하는 기법을 통해 기존의 일관성 확인 기법에서 일어나는 ‘롤백(Rollback)’ 문제를 해결할 수 있었으며, 접근시간(Access time) 측면에서 성능향상을 얻을 수 있었다. 또한 본 논문에서는 임계값 기반의 보완 기법을 제안한다. 우리는 실험 결과를 통해 제안하는 기법이 약간의 현재성(Currency) 손해는 있지만, 접근시간 측면에서 효율적임을 증명하여 준다.

• 보존과학회지
• /
• 제38권3호
• /
• pp.201-216
• /
• 2022

성산사에 봉안되어 있는 성주 이씨가(家) 초상화 중 2점(이조년, 이숭인)을 대상으로 사용재료 및 기법에 대한 과학적 분석을 실시하고, 그 데이터를 기반하여 최적의 모사복원방안을 설계하였다. 표현 기법 조사 결과, 두 진영 모두 선묘 위주로 표현되었지만, 신발과 눈동자, 육색 표현, 가채, 보강 흔적 등에서 차이를 보였다. 안료 분석 결과, 공통적으로 적색 안료는 주사와 연단의 혼합 혹은 유기 안료를 사용하였으며, 청색 안료는 석청을 사용했다. 녹색 안료는 석록(Malachite)이 사용되었고, 백색 안료는 연백을 사용했다. 황색 안료는 유기 안료와 금박이 사용된 것으로 추정된다. 이숭인 진영은 석간주와 녹염동광(Atacamite)도 사용되었다. 또한 동시대 사대부상과 비교한 결과, 두 초상화에서 당시 초상화 양식이 발견되나 변형된 특이점이 존재하였다. 과학적 분석 데이터를 기반으로 하여 이조년 진영은 고색복원모사, 이숭인 진영은 현상모사로 결정하였다. 육안으로 확인하기 어려운 표현 기법들을 과학적 분석 데이터로 보완하여 세부적인 채색 기법을 제시하였다. 또한 각 색상별로 초상화에서 대표적인 위치의 색도를 측정하여 평균값을 계산한 색상 기준값을 제시함으로써 유물의 현재 색상을 최대한 객관적 데이터를 근거로 하여 모사복원할 수 있도록 하였다.

• 치위생과학회지
• /
• 제15권2호
• /
• pp.196-201
• /
• 2015

본 연구에서는 최근 창조경제의 일환으로서 3차원 프린팅 기술의 개발이 눈에 띄게 발전함에 따라 치의학계 보철물 제작 기술에도 영향을 주고 있는 이 기술에 의해 제작된 3본 고정성 보철물의 임상적 허용 가능성을 변연 간격을 기준으로 가늠하여보고자 하였다. 3차원 프린팅 기술에 의해 제작된 보철물 평가와 관련한 연구가 부족함에 따라 본 연구 결과를 통해 해당 종사자들(치과의사, 치과위생과, 치과기공사)에게 참고자료를 제시하고자 하였다. 연구 결과들을 종합하여 보면 3차원 프린팅 기술에 의해 제작된 3본 고정성 보철물은 같은 증례를 대상으로 전통적인 제작방식에 의해 제작된 것보다 변연 간격이 우수하지 못하였다. 비록 몇몇 임상가들이 제시한 임상적 허용 수치 내에는 존재하였으나 기존의 제작 기술을 대신하기 위해서는 앞으로 많은 연구들을 통하여 기술의 발전이 이루어져야 할 것으로 생각된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.479-482
• /
• 2002

Riblets with longitudinal grooves along the streamwise direction have been used as an effective flow control technique for drag reduction. A flexible micro-riblet with v-grooves of peak-to-peak spacing of $300{\mu}m$ was made using a MEMS fabrication process of PDMS replica. The flexible micro-riblet was attached on the whole surface of a NACA0012 airfoil with which grooves are aligned with the streamwise direction. The riblet surface reduces drag coefficient about $7.9{\%}\;at\;U_o=3.3m/s$, however, it increases drag about $8{\%}\;at\;U_o=7.0m/s$, compared with the smooth airfoil without riblets. The near wake has been investigated experimentally far the cases of drag reduction ($U_o\;=\;3.3 m/s$) and drag increase ($U_o\;=\;7 m/s$). Five hundred instantaneous velocity fields were measured for each experimental condition using the cross-correlation PIV velocity field measurement technique. The instantaneous velocity fields were ensemble averaged to get spatial distribution of turbulent statistics such as turbulent kinetic energy. The experimental results were compared with those of a smooth airfoil under the same flow condition. The micro-riblet surface influences the near wake flow structure largely, especially in the region near the body surface

• 대한치과기공학회지
• /
• 제38권4호
• /
• pp.305-311
• /
• 2016

Purpose: The purpose of this study were to analysis of marginal adaptation of metal cores fabricated by selective laser sintering. Methods: Main model was prepared and ten stone models were fabricated. Ten single metal cores were fabricated by selective laser sintering(SLS group) and another ten single metal cores using lost wax technique and casting method were manufactured(CAST group). The marginal adaptation of metal cores were analysis using by the silicone replica technique. Silicone replicas were sectioned two times. The marginal adaptations were measured using by digital microscope. Statistical analyses was performed with independent t-test(${\bullet}{\cdot}=0.05$). Results: Means of marginal adaptations were 90.3 ${\ss}{\uparrow}$ for SLS group and 65.1 ${\ss}{\uparrow}$ for CAST group. Two groups were statistically significant differences (p < 0.05). Conclusion: Marginal adaptation of metal cores fabricated by selective laser sintering were ranged within the clinical recommendation.

• 대한치과기공학회지
• /
• 제44권4호
• /
• pp.126-131
• /
• 2022

Purpose: The purpose of this study is to evaluate the quality of dental fixed prostheses fabricated by 3DP (three-dimensional printing). Methods: Ten main models were prepared for the study. Ten specimens were printed by 3DP (3DP group). Ten specimens were fabricated by the lost wax technique and casting method to complete the control group (LWC group). The marginal fit was measured for 20 specimens. The measurement of marginal fit was performed using the silicon replica technique. Finally, the marginal fit of 10 specimens from each group was calculated. An independent sample t-test was run to see if the calculated averages for the two groups were mutually significant (α=0.05). Results: According to the experimental results, the mean marginal fit of the 3DP group was 71.9 ㎛, and the LWC group was 55.3 ㎛. The means of the two groups were found to be significantly different (p<0.001) in the results of the independent sample t-test. Conclusion: The marginal fit of fixed dental prostheses produced by 3DP technology was examined with values greater than those fabricated by traditional technology. However, as it appeared to be a value within the range of clinically acceptable range recommended by numerous studies, it was determined that clinical application would be feasible.

• 보존과학연구
• /
• 통권7호
• /
• pp.218-236
• /
• 1986

In the fields of the cultural properties, the Infrared TV camera is being initiated to use instead of the Infrared photo film fo a better means to detect the description of drawings of the paintings. Seeing from the effect of transillumination, the Infrared TV camera with its long wave of visible spectrum that makes less absorption by the pigments and with the reflection rays passing through the base of colour layers makes it able to findbase drawing and letters. The detection range of transillumination by the infrared rays depends on the kinds of pigments, lines of the base drawing and wave length of the infrared rays. In our country, it was the first time to detect by our Conservation Science Dep't of The Research Institute of Cultural Properties by means of using Infrared TV camera to determine the mural paintings on the Josadang, Busuk Temple, resulted in an epoch-making success, that we have come to know the painting technique methods, how to treat for its conservation and making replica, reproduction, etc.

• Tribology and Lubricants
• /
• 제29권5호
• /
• pp.304-309
• /
• 2013

Shark skin has functionalities such as self-cleaning and antifouling; it also exhibits excellent drag reduction owing to a hierarchical structure of microgrooves and nanometer-long chain mucus drag reduction interfaces around the shark body. In this study, the wettability of a shark skin surface and its replicas are evaluated. First, a shark skin template is taken from a real shark. Then, shark skin replicas are produced directly from a shark skin template, using a micromolding technique. The quantitative replication precision of the shark skin replicas is evaluated by comparing the geometry of the shark skin template to the replica using 2D surface profiles. Contact angles at the solid-air-water interfaces are evaluated for the shark skin template and its replicas under two conditions: with and without hydrophobic coating. The results show that the microriblets on shark skin improve the hydrophobic feature and play a critical role in self-cleaning.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1168-1170
• /
• 2005

Nanoimprint Lithography(NIL) has increasingly been recognized as a key manufacturing technology for nanosized feature. One of the most important task for nanoimprint lithography is to provide the imprinting stamp with low price. The Stamp fabricated with Si based material by e-beam lithography, RIE is extremely expensive and its throughput is very limited and PDMS replica is too soft to hold high imprinting pressure.(>5atm) In this study, we present the imprinting stamp which can be easily replicated from original mold and is based on PVC film. Replication of original Si mold to PVC film was done by Hot embossing technique, ($120^{\circ}C$ of Temperature, 20 atm applied) As small as 100nm patterns were successfully transferred into PVC film. The size of stamp was up to 100mm in diameter.

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.38-46
• /
• 2005

The destructive method is reliable and widely used for the estimation of material degradation but it have time-consuming and a great difficulty in preparing specimens from in-service industrial facilities. Therefore, the estimation of degraded structural materials used at high temperature by nondestructive evaluation such as electric resistance method, replica method, Barkhausen noise method, electro-chemical method and ultrasonic method are strongly desired. In this study, various nondestructive evaluation(NDE) parameters of the Barkhausen noise method, such as MPA(Maximum Peak Amplitude), RMS, IABNS(Internal Area of Barkhausen Noise on Signal) and average amplitude of frequency spectrum are investigated and correlated with thermal damage level of 2.25cr-1.0Mo steel using wavelet analysis. Those parameters tend to increase while thermal degradation proceeds. It also turns out that the wavelet technique can help to reduce experimental false call in data analysis.