• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.235-243
• /
• 2002

Ni-base superalloys are used extensively in industry, both in aeroengines and land based turbines. About 60% by weight of most modern gas turbine engine structural components are made of Ni-base superalloys. To satisfy practical demands, the efficiency of gas turbine engines has been steadily and systematically increased by design modifications to handle higher turbine inlet or firing temperatures. However, the increase in operating temperatures has lead to a decrease in the life of components and increase in costs of replacement. Moreover, around 80% of the large frame size industrial/utility gas turbines operating in the world today were installed in the mid-sixties to early seventies and are now 25 to 30 years old. Consequently, there are greater opportunities now to repair and refurbish the older models. Basically, there are two major factors influencing the weldability of the cast alloys: strain-age cracking and liquation cracking. Susceptibility to strain-age cracking is due to the total Ti plus AI content of the alloy; Liquation cracking is due either to the presence of low melting constituents or constitutional liquation of constituents. Though Rene 41 superalloy has 4.5wt.% total Ti and Al content and falls just below the safe limit proposed by Prager et al., controlled grain size and special heat treatments are needed to obtain crack-free welds. Varying heat treatments and filler materials were used in a laboratory study, then the actual welding of service parts was carried out to verity the possibility of crack-tree weld of components fabricated from Rene 41 superalloy. The microstructural observations indicated that there were two kinds of carbides in the FCC matrix. MC carbides were located along the grain boundaries, while M$_{23}$C$_{6}$ carbide was located both inter and intra granularly. Two kinds of filler materials, Rene 41 and Hastelloy X were used to gas tungsten arc weld a patch into the sheet metal, along with varying pre-weld heat treatments. The microstructure, hardness and tensile tests were determined. The service distressed parts were categorized into three classes: with large cracks, with medium cracks and with small or no visible cracks. No significant difference in microstructure among the specimens was observed. Specimens were cut from the corner and the straight edge of the patch repair, away from the corner. The only cracks present were found to be associated with inadequate surface preparation to remove oxidation. Guidelines for oxide removal and the welding procedures developed in the research enabled crack-free welds to be produced.d.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.12
• /
• pp.1699-1707
• /
• 2000

Thirty-one multiparous Bos indicus${\times}$Bos taurus cows were offered concentrate supplements based on (1) 2 kg wheat bran; (2) 4 kg wheat bran; and (3) concentrate (30 maize: 67 wheat bran) at 0.5 kg per 1.0 kg milk produced, in a one year study in India. All supplements also contained 2 parts of a mineral mixture and 1 part salt. Cows were allocated to treatments at calving on parity (2nd and 3rd calf) with 13, 8 and 10 cows respectively in treatments 1, 2 and 3. They were individually fed for whole lactation, the basal diet being ad libitum berseem clover plus 2 kg wheat straw in the cool season/winter (period 1) and chopped maize in summer (period 2). Diets with berseem offered TDN and CP contents of 67.6, 18.2; 65.5, 16.8; and 67.5, 16.8 percent; and with maize fodder 62.6, 12.0; 62.6, 12.5; and 63.3, 12.5 percent for treatments 1, 2 and 3, respectively. Total dry matter (DM) intakes (1) 9.9 kg, (2) 10.9 kg and (3) 11.1 kg DM/day and intake of nutrients (TDN, CP) increased with level of supplementation (p<0.01), but effects of treatment on animal performance were not significant. Cow milk yields averaged (1) 7.9 kg, (2) 8.1 kg and (3) 8.8 kg milk/day (p>0.05) for lactation lengths of 252, 270 and 220 days (p>0.05) and cows gained +7.3; +8.1; and +12.0 kg respectively over their lactation (p>0.05). Wheat bran was used effectively as the sole energy component in concentrates for lactating dairy cows. Its use could potentially reduce feed costs and demands for cereal grain. Reduced concentrate levels may be considered if green forages of high nutrient content are fed ad libitum. Associated economic advantages or disadvantages require further evaluation.

• Journal of Chest Surgery
• /
• v.23 no.4
• /
• pp.617-621
• /
• 1990

A heart supplies blood of about 15, 000 liters to each human organ in a day. A normal function of heart valves is necessary to accomplish these enormous work of heart. The disease of heart valve develops to a narrowness of a closure, resulting in an abnormal circulation of blood. In an attempt to eliminate the affliction of heart valves, the operative method to replace with artificial heart valves has developed and saved numerous patients over past 30 years. This replacement operation has been performed since early 1960`s in Korea, but all the artificial heart valves used are imported from abroad with very high costs until recent years. New artificial heart valves have been developed in Korea Advanced Institute of Science and Technology since early 1980`s. The first developed valve was designed with a free-floating pyrolytic carbon disk that is suspended in a titanium cage. The design of the valve was tested in vitro, and in animals in 1987. The results from this study was that the eccentrically placed struts creates a major and minor orifice when the disc opens and stagnation of flow in the area of the minor orifice has led to valve thrombosis. In this work, the design of the valve was changed from a single - leaflet valve to double - leaflet one in order to resolve the problems observed in the first - year tests. Morphological and hemodynamic studies were made for the newly designed valves through the in vitro and in vivo tests. The design and partial materials of the artificial heart valve was improved comparing with first - year`s model. The disc in the valve was modified from single - leaflet to bi - leaflet, and the material of the cage was changed from titanium metal to silicon - alloyed pyrolytic carbon. A test was made for the valve in order to examine its mechanical performance and stability. Morphological and hemodynamic studies were made for the valve that had been implanted in tricuspid position of mongrel dogs. All the test animals were observed just before the deaths. A new artificial heart valve was designed and fabricated in order to resolve the problems observed in the old model. The new valve was verified to have good stability and high resistance to wear through the performance tests. The hemodynamic properties of the valve after implantation were also estimated to be good in animal tests. Therefore, the results suggest that the newly designed valve in this work has a good quality in view of the biocompatibility. However, valve thrombosis on valve leaflets and annulus were found. This morphological findings were in accordance with results of surface polishing status studies, indicating that a technique of fine polishing of the surface is necessary to develop a valve with higher quality and performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.57-64
• /
• 2016

The purpose of this research is to study, through the Delphi method, using an expert panel of 14 persons, effective workforce plans for CCTV applications. The need for professional manpower for activities related to CCTV has emerged through technological development and increased utilization of the CCTV industry sectors. Efficient workforce improvement for the CCTV sector presented in this study are in regards to student education. This study proposes an appropriate description for curriculum and related promotional information. This study should create an environment for overcoming the lack of student involvement and commitment to the environment and ensure training after qualification status after the training provided, including measures to maintain. In order to prevent employee turnover, CCTV training is necessary to actively review government support measures. This study also proposes providing a proper educational environment and supply of replacement staff members brought on by training courses. In terms of education administration bodies, we propose that education and training in CCTV management provide a variety of benefits including participation in education, adequate publicity through cooperation with relevant institutions, and introduces new educational programs. We propose providing adequate training that meets the needs of consumer, as well as education, course selection and expanded curriculum in accordance with operating options and the costs of training. In addition, senior student-selected personnel are needed to address the shortage of operators starting work-experience or training.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.866-871
• /
• 2002

An experiment was conducted at the experimental duck farm of Cantho University to determine the effects of feeding duckweed (Lemna minor) that replaced commercial protein supplements in diets for local and Cherry Valley breeding ducks. The experiment included a total of 180 ducks, with five treatments and three replicates and six breeding ducks (one male plus five females together) per replicate, for both local and exotic Cherry Valley ducks. The five diets were fed ad libitum and were based on rice byproducts supplemented with roasted soya bean meal plus dried fishmeal at levels of 100% (SF100, control), 75 (SF75), 50 (SF50), 25 (SF25) or zero (SF0) % of the protein in the control diet, corresponding to 18, 15, 13, 10 and 8% CP in the diets for both breeds, respectively. Fresh duckweed was supplied ad libitum for all treatments. These diets were fed to local breeding ducks from 7 to 12 months of age, and to exotic breeding ducks (Cherry Valley) from 8 to 13 months of age. Total mean daily dry matter (DM) intakes were 183, 178, 176, 177 and 174 g (p<0.05) for the local ducks, and 221, 208, 215, 219 and 210 g (p<0.01) for the exotic ducks for the SF100 (control), SF75, SF50, SF25 and SF0 diets, respectively. Laying rates of the local ducks were 66.5, 65.2, 62.9, 63.1 and 62.3%, and of the Cherry Valley ducks 61.9, 58.4, 58.9, 59.1 and 53.5% (p<0.001) for the control (SF100), SF75, SF50, SF25 and SF0 treatments, respectively. Fertile egg rates were 95.6, 95.6, 97.8, 97.8 and 92.2%, and hatchabilities 89.4, 80.6, 87.2, 88.6 and 77.8% (p<0.05) for the local breed, and 97.8, 97.8, 91.1, 92.2 and 90.0% (p<0.05) and 72.8, 74.7, 75.0, 74.3 and 76.7% for the Cherry Valley ducks for diets SF100, SF75, SF50, SF25 and SF0, respectively. Corresponding feed conversion ratios (dry matter basis) were 3.83, 3.82, 3.89, 4.01 and 3.96 kg feed per kg egg mass for the local ducks and 4.52, 4.56, 4.58, 4.73 and 5.02 kg feed per kg egg mass for the Cherry Valley ducks for the SF100, SF75, SF50, SF25 and SF0 treatments, respectively. Replacement of 100% of the protein supplement by fresh duckweed in the diets of the local laying ducks decreased the feed costs by 25% compared to the control diet.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.526-534
• /
• 2011

The MFS (Mlti-Functional Structure) concept, which integrates the electronics, thermal control and structure into a single packaging system, has been developed and applied to reduce the volume and weight of the satellite. Therefore, this MFS can eliminate the bulky chassis/frames, cables and connectors of the electronic equipment. The main point of this traditional MFS is the replacement of the electrical chassis/frames with MCMs (Multi-Chip Modules) that require much costs and efforts for developing. This paper shows the new MFS concept that effectively saves the volume and weight. The structure including the thermal control and radiation shielding elements will be designed and manufactured as the rectangular grid-stiffened structure. The rectangular grid-stiffened structure is the modification of the iso-grid structure, and provides the enough spaces for putting the general PCBs without the chassis/frames.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.588-588
• /
• 2013

Nanoscale noble-metals have attracted enormous attention from researchers in various fields of study because of their unusual optical properties as well as novel chemical properties. They have possible uses in diverse applications such as devices, transistors, optoelectronics, information storages, and energy converters. It is well-known that nanoparticles of noble-metals such as silver and gold show strong absorption bands in the visible region due to their surface-plasmon oscillation modes of conductive electrons. Silver nanocubes stand out from various types of Silver nanostructures (e.g., spheres, rods, bars, belts, and wires) due to their superior performance in a range of applications involvinglocalized surface plasmon resonance, surface-enhanced Raman scattering, and biosensing. In addition, extensive efforts have been devoted to the investigation of Gold-based nanocomposites to achieve high catalytic performances and utilization efficiencies. Furthermore, as the catalytic reactivity of Silver nanostructures depends highly on their morphology, hollow Gold nanoparticles having void interiors may offer additional catalytic advantages due to their increased surface areas. Especially, hollow nanospheres possess structurally tunable features such as shell thickness, interior cavity size, and chemical composition, leading to relatively high surface areas, low densities, and reduced costs compared with their solid counterparts. Thus, hollow-structured noblemetal nanoparticles can be applied to nanometer-sized chemical reactors, efficient catalysts, energy-storage media, and small containers to encapsulate multi-functional active materials. Silver nanocubes dispersed in water have been transformed into Ag@Au nanoboxes, which show highly enhanced catalytic properties, by adding $HAuCl_4$. By using this concept, $SiO_2$-coated Ag@Au nanoboxes have been synthesized via galvanic replacement of $SiO_2$-coated Ag nanocubes. They have lower catalytic ability but more stability than Ag@Au nanoboxes do. Thus, they could be recycled. $SiO_2$-coated Ag@Au nanoboxes have been found to catalyze the degradation of 4-nitrophenol efficiently in the presence of $NaBH_4$. By changing the amount of the added noble metal salt to control the molar ratio Au to Ag, we could tune the catalytic properties of the nanostructures in the reduction of the dyes. The catalytic ability of $SiO_2$-coated Ag@Au nanoboxes has been found to be much more efficient than $SiO_2$-coated Ag nanocubes. Catalytic performances were affected noteworthily by the metals, sizes, and shapes of noble-metal nanostructures.

• Korean Journal of Social Welfare
• /
• v.50
• /
• pp.87-108
• /
• 2002

According to Neo-liberalism, the privatization of social security systems is pivotal for a country's economic growth and the wellbeing of its people, because such systems hinder the full operation of the market, eventually leading the national economy to collapse. The Chilean case of pension privatization is often cited as a good evidence for the Neo-liberal argument. Neo-liberalists say that Chile has experienced a rapid economic growth and retirees have enjoyed a much more pension payment since the national pension system was successfully privatized in 1981. The primary purpose of this article is to provide a critical review on the results of the Chilean pension privatization reform implemented in 1981. This study is intended to give an objective understanding of the reform because the existing evaluations, particularly those from the neo-liberalism, over-emphasize the bright sides of the reform. for this purpose, this article will pay a particular attention to the change in the level of pension payment after the reform. The conclusion of this study is that, contrary to the argument of Neo-liberalism, the pension reform has lowered the level of pension payment and, compared to the old public pension, has made the lives of ordinary retirees less secure. Reorganization of the social security system is more desirable than privatization as a remedy for the current problems of the welfare state.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.475-478
• /
• 2011

driver for safety always check the status of their vehicle, and it is essential to understand. But if you want to know the status of the driver of the vehicle in specialist referral time and money because it costs the operator shall be paid. Today's rapidly changing IT technology with the development of the various features of your phone to check the status of the vehicle was able to do. However, the car's existing phone system, car diagnostic expertise must be learned because it will reveal the status of the vehicle do not have the expertise to not highlight the need for diagnostic. To reflect these points in smartphone users to easily use their own vehicles at a time to determine the status of a system that is required. In this paper, OBD-II protocol conversion WiFi OBD-II connector, retrieving information from the driver of the vehicle replacement cycle of consumables required vehicle inspection, vehicle problems in real-time diagnostic information to the user ease of use shows the IOS implementation in the automotive supply was implemented based on the smartphone.

• Korea journal of population studies
• /
• v.33 no.2
• /
• pp.113-136
• /
• 2010

Low fertility has become quite commonplace worldwide, and Europe has experienced below replacement fertility for several decades. In addition, lowest-low fertility, defined as period total fertility rate below 1.3, has rapidly spread in Europe during the 1990s and is likely to expand further. After the turn of century, lowest-low fertility started spreading in Eastern Asia. Korea's TFR of 1.19 in 2008 is lower than most European countries, although it is higher than the Hongkong(1.02) and Taiwan(1.09). The purpose of this paper is to examine the socioeconomic determinants of lowest-low fertility in Korea. In doing so, this paper discusses the effects of female labour force participation, labour instability on family formation and fertility. The data includes female labour force participation rate, unemployment rate, age at first marriage, and total fertility rate from 1980 to 2008. First, the economic recession hindered young people's economic independence and propensity to marry. Married couples were also depressed with uncertainty toward the future and avoided to have children. Second, the growth in female labor force participation had a negative impact on fertility, under the low level of compatibility between women's work and childrearing. Moreover, this paper argues that the rising cost of children including public and private educational costs is thought to be the main reason of the recent low fertility in Korea. Policy implications and some comments on population policies are also presented in the final section.