• Journal of the Korea Fashion and Costume Design Association
• /
• v.4 no.3
• /
• pp.9-15
• /
• 2002

Compared with synthetic dyes, natural dyes have inferior colorfastness as a result of the exposure of the material to any environment that may be encountered during the processing, testing, storage, display or use of the dyed materials. Especially, colors on fabrics fade excessively after washing. Therefore, it is problem to infer the historic textiles with natural-dyed fabrics. The object of this study is to analyse the factors affected to colorfastness and color change during washing. In experimental, fifteen natural dyes were dyed by the Korean traditional dyeing methods onto natural fiber fabrics: cotton, silk, ramie, and flex. Total 49 dyed fabrics in combination with dyes and fibers were used for the specimen. The Launder-Ometer was used for evaluating the effects of exposure to repetitive washing from 1 to 20 washing cycles (KS K 0430). Color difference(ΔE) in the CIEL＊A＊B＊ color-order system were determined by spectrophotometer at 100 bserver. Washing caused significant changes in the color of natural-dyed fabrics. The degree and nature of color changes on the fabrics were dependent on the combination of fiber and the dye type used. The groups of violet(Lithospermum erythrorhizon Sieb.et Zucc) and black color(Ailanthus altissima Swingle, Phus trichocarpa Miq) yielded excellent colorfastness to repetitive washing. The group of indigo blue color(Polygonum tinctorium Lour.) was also very resistant to color change in washing except silk. Whereas the dye groups of Red, Yellow, Orange, Brown colors indicated greatest changes in color, particularly Carthamus tinctorius L.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.226-229
• /
• 2001

For volume reduction of the wastewater generated on washing the soil contaminated with cobalt, recycling and reuse experiments of the wastewater were executed. Also. the soil remediation efficiency by repetitive washing with fresh citric acid was analyzed. The soil around TRIGA was sampled for the experiment. Results of recycling experiment by replacement-precipitation method were as follows. The remediation efficiency of 1st recycling wastewater was 97% and that of 2nd recycling wastewater was 94%. Also, To obtain remediation efficiency over than 90%, the 5th repetitive washing with fresh citric acid was needed.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.4
• /
• pp.27-35
• /
• 2008

Recently, many studies have reported the fact that an excessively accumulated psychological and physical burden induced from physical labor conducted routinely in home and industry can be one of main reasons of musculoskeletal disorders in the working population. This fact makes increase interests in studies to reduce a risk of musculoskeletal disorders through grafting ergonomic considerations on working environment. However, there are currently limited methodologies in quantitative evaluations of new ergonomic suggestions to reduce a risk of musculoskeletal disorders. The current study is therefore performed to evaluate quantitatively effects of a design of washing machine as a new ergonomic suggestion onto prevention of musculoskeletal disorders, through application of a biomechanical evaluation methodology. For this, three-dimensional motion analysis by using musculoskeletal models with Rapid Entire Body Assessment (REBA), which has been generally used for a simple evaluation of a degree of harmfulness of the human body at specific working postures to be considered, was performed. The results of REBA did not give us enough information and their results were somewhat simple and inaccurate, but the results of the three-dimensional motion analysis give us enough information such as alteration of main muscle forces and joint moments required during washing work. All results showed that the main muscle strengths and joint moments were decreased effectively for reduction of a risk of musculoskeletal disorders during the washing work with newly designed washing machine evaluated in the current study, compared with those generated during the washing work with general washing machine. From these results, it can be concluded that a risk of the musculoskeletal disorders, which may be induced by a repetitive washing work, may be reduced through using the washing machine designed ergonomically and newly. Also, it is thought that if our ergonomic design can be applied for improvement of working environment in lifting and laying works conducted repeatedly for a treatment work of goods, which have a strong resemblance to the behaviors generated frequently during the washing work, a possibility of occurrence of the musculoskeletal disorders by the lifting and laying works may be reduced highly.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.2
• /
• pp.1-10
• /
• 2022

The purpose of this study is to analyze the structural properties of 100% wool fabrics knitted with various stitch types and to evaluate dimensional stability from shrinkage in wet cleaning and drying. Materials were weft-knitted from twenty-four different stitches with 7 gauge using a computerized flatbed knitting machine. Weight, thickness, density, and length were measured. A domestic washing machine and a tumble dryer were used for the shrinkage test. The results are as follows: Knitted fabrics were divided into 3 groups based on weight per unit area. Porous knits show light weight whilst milano, pintuck, rib stitches belong to the heaviest group. A positive correlation between weight and thickness was found and the same result was obtained for wale density and weight. Dimensional shrinkage of knitted fabrics was increased during repetitive wet cleaning and drying regardless of knit stitches. Especially, fabrics knitted with float, tuck, cable, and links & links stitches samples were contracted more than 15% in the first treatment whereas 2x1 rib stitch showed 1% shrinkage rate. Fisherman and milano stitches contracted in both course and wale direction with similar shrinkage rates. However, porous knits with float and tuck stitches shrank in course direction by 20% as well as cable samples contracted from 5% to 20% after repeated washing and drying. On the other hand, 30% and 15% contraction of wale direction occurred in orderly float and links & links stitches, respectively. Machine dried knits have a higher shrinkage rate than air-dried knits, but the drying method did not affect to the direction of contraction. In conclusion, variations of knit, tuck, and float stitches affect knit construction and dimensional stability from shrinkage in wet cleaning and drying of wool knitted fabrics.

• Journal of Applied Biological Chemistry
• /
• v.59 no.1
• /
• pp.63-68
• /
• 2016

This study was performed to assess the microbiological quality of Brassica campestris var. narinosa microgreen from harvesting and processing steps. The samples were analyzed for total viable cell counts (TVC), coliforms, Enterobacteriaceae, Escherichia coli, Salmonella spp., Listeria monocytogenes, Vibrio parahaemolyticus, Bacillus cereus, and Staphylococcus aureus. The total viable counts of microgreen (whole leaves) and environment samples from harvesting steps were higher than 6.8 log CFU/g and the contamination level of coliforms in the samples were 3.2 log CFU/g and 3.5 log CFU/g of microgreen and soil, respectively. In case of microgreen samples collected from processing steps, the contamination level of TVC and coliforms were higher in raw materials than samples obtained from later stages of processing, i.e. washing, drain, and final products. The contamination levels of B. cereus in raw materials and environments decreased approximately 1.4 log CFU/g in final products. S. aureus was detected in soil samples but Salmonella spp., Listeria monocytogenes, Vibrio parahaemolyticus and pathogenic E. coli was not detected. In order to identify the sources of contamination for microgreen, the genetic similarity of B. cereus isolates obtained from harvesting and processing steps were compared using the repetitive-sequence-based polymerase chain reaction method. B. cereus isolates obtained from harvesting environments and microgreen were clustered with a similarity greater than 95%. In case of B. cereus isolates obtained from microgreen and environmental samples at processing steps showed low genetic similarity.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.73-80
• /
• 2007

This study was carried out to separate the heavy toxic metals in eco-building materials by low-temperature pyrolysis, especially arsenic (As) compounds in CCA wood preservative as a solid in char. The pyrolysis was carried out to heat the CCA-treated Hemlock at $280^{\circ}C$, $300^{\circ}C$, $320^{\circ}C$, and $340^{\circ}C$ for 60 mins. Laboratory scale pyrolyzer composed of [preheater$\rightarrow$pyrolyzer$\rightarrow$1st water scrubber$\rightarrow$2nd bubbling flask with 1% $HNO_3$ solution$\rightarrow$vent], and was operated to absorb the volatile metal compound particulates at the primary water scrubber and the secondary nitric acid bubbling flask with cooling condenser of $4^{\circ}C$ under nitrogen stream of 20 mL/min flow rate. And the contents of copper, chromium and arsenic compounds in its pyrolysis such as carbonized CCA treated wood, 1st washing and 2nd washing liquors as well as its raw materials, were determined using ICP-AES. The results are as follows : 1. The yield of char in low-temperature pyrolysis reached about 50 percentage similar to the result of common pyrolytic process. 2. The higher the pyrolytic temperature was, the more the volatiles of CCA, and in particular, the arsenic compounds were to be further more volatile above $320^{\circ}C$, even though the more repetitive and sequential monitorings were necessary. 3. More than 85 percentage of CCA in CCA-treated wood was left in char in such low-temperature pyrolytic condition at $300^{\circ}C$. 4. Washing system for absorption of volatile CCA in this experiment required much more contacting time between volatile gases and water to prevent the loss of CCA compounds, especially the loss of arsenic compound. 5. Therefore, more complete recovery of CCA components in CCA-treated wood required the lower temperature than $320^{\circ}C$, and the longer contacting time of volatile gases and water needed the special washing and recovery system to separate the toxic and volatile arsenic compounds in vent gases.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.320-330
• /
• 2012

The natural dyeing of cotton fabrics with guava leaf extract was investigated. The temperature and time of dyeing are $40^{\circ}C$ and $90^{\circ}C$ for eighty minutes, respectively. In addition, the dyebath has been set at pH 5. Sn pre-mordanted fabrics showed the highest K/S value. Regardless of dyeing temperature, K/S values were high when Al, Cu, Fe-mordanted fabrics were dyed in post-mordanting and Sn-mordanted fabrics were dyed in pre-mordanting. The K/S value of dyeing fabrics could be increased with repetitive dyeing and mordanting. Compared to untreated dyed fabrics, the K/ S values of fabrics which had been treated with soybean milk, chitosan and gall nut tannin were increased. The changed surface colors of fabrics that were treated with soybean milk, chitosan and gall nut tannin were Y, YR and achromatic colors. Fabrics dyed with alkaline water extract showed reddish color. Sn-mordanted fabrics dyed with acidic water extract showed vivid yellowish color, and Cu-mordanted fabrics dyed with ethanol extract showed yellowish green color. In case of Sn-mordanted fabrics, the washing fastness was level 4. The dry cleaning fastness also showed very excellent result with level 4-5. The rubbing fastness was better in dry rubbing than in wet rubbing of the fabrics. For the light fastness, all dyed fabrics showed low fastness. For antibacterial activity, the powder of guava leaf extract and the dyed fabrics with guava leaf extract showed 99.9% of high antibacterial activity. All dyed fabrics showed higher deodorization and UV protection rate than control fabric.

• Parasites, Hosts and Diseases
• /
• v.44 no.1 s.137
• /
• pp.73-79
• /
• 2006

We evaluated the efficacy of health education in reducing indoor arthropod allergens in Seoul. The mite control measures comprised the use of mite-proof mattress and pillow coverings, regular washing of potentially infested materials, maintenance of a low humidity, removal of carpets, and frequent vacuum cleaning. Cockroach control measures included trapping, application of insecticides, and protecting food. Of 201 homes enrolled in October 1999, 63 volunteers were included in a 2-year follow-up survey between April 2000 and January 2002. Before intervention, the density of mites/g of dust varied greatly; 27.1/g in children's bedding, 20/g in adult bedding, 7.2/g on the floors of children's bedrooms, 6.8/g in sofas, 5.9/g on the floors of adult's bedrooms, 3.9/g on living room floors, 3.7/g in carpets, and 1.9 mites/g on kitchen floors. The predominant mite species and house percentages infested were; Dermatophagoides farinae $93\%$, D. pteronyssinus $9\%$, and Tyrophagus putrescentiae $8\%$. Comparing 1999 and 2001 infestations, before and after 25 mo of education, mite abundance was reduced by $98\%$, from 23.7 to 0.57 mites/g of dust. In 1999, cockroaches were detected in $62\%$ homes: $36\%$ Blattella germanica and $35\%$ Periplaneta spp., including $9\%$ double infestations of B. germanica and P. americana. Following intervention, cockroach infestation rates decreased to $22\%$ of houses in 2000 and $23\%$ in 2001. We conclude that continuous and repetitive health education resulted in the effective control of domestic arthropods.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.15 no.2
• /
• pp.143-151
• /
• 2004

Objectives : Child and adolescent onset obsessive compulsive disorder(C-OCD) is known to be associated with poor drug response, high comorbid rate and strong genetic tendencies. Till now studies for C-OCD have been very rare in Korea. We conducted this study to investigate the informations about clinical features, familial psychiatric loading, treatment profiles and course of server C-OCD from the retrospective analysis of inpatient data of Seoul National University Children's Hospital. Method : Retrospective chart review and data analysis was performed. Twenty(male 16 : female 4) patients with final C-OCD diagnosis by DSM-IV at discharge from 1994 to 2002 were found and their medical chart, psychological data, family interview data and nursing reports were collected and analyzed. Results : 1) The sex ratio of C-OCD was male dominant(4:1). 2) Phenomenological, most common obsession was pathologic doubt, contamination fear, followed by aggressive obsession, need for symmetry, sexual obsession, most common compulsion was checking and washing, followed by breathing, movement, symmetry, repetitive asking, hoarding, mental compulsion. 3) Most common comorbid diagnosis was depression. Other axis-I diagnosis associated OCD were anxiety disorder, tic disorder, conduct and oppositional defiant disorder and psychosis. 4) Regarding psychiatric familial loadings, 17 patients(85%) had relatives with psychiatric disorders, OC-spectrum disorders(OCD or OCPD) were found in 9 patients(45%). 5) The majority of patients(75%) have received SSRI and antipsychotics treatment. The response rate above 'moderate improved" by CGI was 75%. 6) During follow-up period in outpatient clinic, five patients(25%) showed continuous complete remission, 10 patients (50%) did residual symptoms with chronic course. Conclusion : This seems to be the first systemic investigation of severe pediatric OCD patients in Korea. The children & adolescents with severe OCD in inpatient-setting showed the high comorbid rate, familial psychiatric loading, and combined pharmacotherapy with antipsychotics, As for symptoms, high rate of aggressive-sexual obsession and atypical compulsions like breathing and moving was reported in this study. Severe pediatric OCD patients, however, responded well to the combined SSRI and antipsychotics regimen.

• Clean Technology
• /
• v.25 no.3
• /
• pp.256-262
• /
• 2019

Hydroxylammonium nitrate (HAN)-based liquid propellants are attracting attention as environmentally friendly propellants because they are not carcinogens and the combustion gases have little toxicity. The catalyst used to decompose the HAN-based liquid propellant in a thruster must have both low temperature activity and high heat resistance. The objective of this study is to prepare an Ru/alumina/metal foam catalyst by supporting alumina slurry on the surface of NiCrAl metal foam using a washing coating method and then to support a ruthenium precursor thereon. The decomposition activity of a HAN aqueous solution of the Ru/alumina/metal foam catalyst was evaluated. The effect of the number of repetitive coatings of alumina slurry on the physical properties of the alumina/metal foam was analyzed. As the number of alumina wash coatings increased, mesopores with a diameter of about 7 nm were well-developed, thereby increasing the surface area and pore volume. It was optimal to repeat the wash coating alumina on the metal foam 12 times to maximize the surface area and pore volume of the alumina/metal foam. Mesopores were also well developed on the surface of the Ru/alumina/metal foam catalyst. It was found that the metal form itself without the active metal and alumina can promote the decomposition reaction of the HAN aqueous solution. In the case of the Ru/alumina/metal foam-550 catalyst, the decomposition onset temperature was significantly lowered compared with that of the thermal decomposition reaction, and ${\Delta}P$ could be greatly increased in the decomposition of the HAN aqueous solution. However, when the catalyst was calcined at $1,200^{\circ}C$, the catalytic activity was lowered inevitably because the surface area and pore volume of the catalyst were drastically reduced and Ru was sintered. Further research is needed to improve the heat resistance of Ru/alumina/metal foam catalysts.