• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1474-1482
• /
• 1994

In order to study the influence of a circular inclusion on a stress field neat a crack tip, mutual interference of a crack and the circular inclusion is analyzed by using the two dimensional boundary element method program made for the analysis of a bimaterial inclusion. The stress intensity factor of an inclusion which has small stiffness is a little greater than that of large stiffness in the near-by crack tip, and similar values tends to appear for distant crack tips. A line crack shows the repetition phenomena which caused by stress mutual interference depending on the radius and stiffness of an inclusion, and the repetition phenomena becoms weak in the inclusion which has large stiffness. Stress mutual interference shows repetition phenomena after extension of a line crack by the length of the radius of the inclusion which has small stiffness.

• 대한음성학회지:말소리
• /
• 제67호
• /
• pp.61-77
• /
• 2008

The purpose of this study is to blow the characteristics of disfluency in childhood. The subjects were 144 normal children at the age of between 3 to 8 years who lived in Seoul. All the subjects provided spontaneous conversational speech samples during free-play interactions with their friends. We investigated the patterns and the frequency of disfluency and its relevance with subject's age, speaking rate and MLU(mean length of utterance). The results of this study can be summarized as follows. (1) There was no difference in the frequency of disfluency with the speaker's age or speaking rate. (2) Interjection was the most frequently occurring pattern of disfluency. (3) Prolongation, revision, interjection increased with age while part-word repetition, single-syllable word repetition, multi-syllable word repetition decreased gradually. (4) A significant effect of MLU on the frequency of disfluencies were demonstrated. The regression analysis has shown that more disfluencies occurred in utterances of children whose MLU is longer.

• 한국컴퓨터정보학회논문지
• /
• 제21권7호
• /
• pp.39-46
• /
• 2016

In this paper, we proposed an application which can conduct to take repetition images for special effect shooting at movies or drama using Bluetooth of smart device. The proposed application can move a camera with motors several times as the same moving after saving of the control data based on the application during specific time using Bluetooth. At the repetition moving, we do not permit to control motors of the camera by person for keeping the same start position and end position after saving the moving data. The camera motors are only moved remotely by saving data of the proposed application. We developed the proposed application and a hardware which works motors with camera to check performance evaluation. Then, we confirmed that the proposed application exactly did the same moving to the motors with camera several times according to saved data. Therefore, because the proposed application can take a same images as control remotely the motors of camera, it will be a useful technology for special effect shooting of movies or dramas.

• 한국통신학회논문지
• /
• 제41권12호
• /
• pp.1768-1770
• /
• 2016

본 논문에서 상대 차족을 이용하여 분산 저장 부호의 한 종류인 분할 반복 부호를 설계하는 방법을 제안한다. 제안하는 부호는 각 데이터 심볼마다 다른 반복 차수를 지원할 수 있다. 모의실험을 통하여 제안하는 부호가 랜덤 분할 반복 부호보다 더 많은 양의 데이터를 저장할 수 있음을 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1696-1698
• /
• 1998

Pulsed Nd:YAG laser using Nd:YAG crystal operates stably in the thermal conductivity, mechanical, optical condition. That is used broadly in material processings because of easy reaction to the materials, and the maintenance is very easy because of lamp excitation. In these material processings, power dinsity control is very important to improve processing technology. Power density is controled by inductance and capacitance or repetition rate. Therefore we are going to control laser power density as One-Chip Microprocessor(PIC16C55) and 8051. We have been experimented at the pulse repetition rate range of 10pps to 60pps(pulse per second).

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.611-615
• /
• 2014

We report high-speed pulse train generation from a relatively low-speed 10-GHz mode-locked laser by means of line-by-line spectral coding. To increase the pulse repetition rate multiplication (RRM) factor, we combine coding schemes for both spectral intensity and phase by placing a simple mask at the coder focal plane. The resulting RRM factor, determined by multiplying the RRM factors of the individual coding schemes, rises as high as 16. To verify the generated pulses, the optical spectra and autocorrelation traces are examined.

• 한국전기전자재료학회논문지
• /
• 제11권12호
• /
• pp.1055-1059
• /
• 1998

The correlation between the propagation of electrical tree and distributions of partial discharge(PD) pulses accompanying with electrical tree of bush type in low density polyethylene were discussed. We measured the growth of electrical tree by using optical microscope and PD data simultaneously. The PD data detected and analyzed were PD magnitude, repetition rate, average discharge power, average phase angle, and $\psi$-q-n distribution pattern. The average discharge power and repetition rate of PD had good linear relation with area of tree. Repetition rate and peak discharge magnitude and width of discharge phase angle increased with the tree.

• 전기학회논문지
• /
• 제64권5호
• /
• pp.746-750
• /
• 2015

In this paper, we propose a simulator to evaluate the performance of the semi-active laser guidance or the quadrant photodetector and to simulate the laser power reflected from a target. The laser pulse repetition frequency was generated and synchronized with the laser pulse repetition(PRF) code. To evaluate the performances of the proposed methods, we implemented a prototype system and performed experiments. As a result, the generated high voltage was variable in the range of DC 3V to 340V and has the rate of change of 2000 V/s. PRF code can be generated within 50ms ∼ 100ms and the error is implemented within 0.3ns. The laser output is synchronized with the PRF code and has a dynamic range of 23.6dB.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3326-3333
• /
• 2023

The results of the analysis of a mathematical modeling for the IBR-2M pulsed reactor dynamics for a transition from a power pulse repetition frequency of 5 Hz-10 Hz are presented. The change in the amplitude response of the reactor for variable pulse delayed neutron fraction was studied. We used a set of power feedback parameters determined experimentally in 2021 at an energy output of 1820 MW·day. At a pulse repetition frequency of 10 Hz, the amplitude of pulse energy oscillations significantly depends on the value of the delayed neutron fraction in pulse β_p. Depending on β_p both suppression and amplification of reactor power fluctuations in the frequency ranges of 0.05-0.20 and 1.25-5.00 Hz can be realized.

• 대한소아치과학회지
• /
• 제28권1호
• /
• pp.32-44
• /
• 2001

Er : YAG 레이저의 상아질 삭제효과와 이에 따른 온도변화를 평가하고자 발거된 소구치와 대구치로 상아세관내 조직액과 치수내압을 유지할 수 있는 상아질 시편을 제작하고 $2.94{\mu}m$의 pulsed Er : YAG 레이저(SDL-300EN, 삼성전자, 한국)를 handpiece형의 전달계를 이용한 비접촉식 방법으로 조사세기, pulse repetition rate, 조사시간, 물 분사여부 등의 조사조건을 달리하여 상아질 면에 조사하고 이때의 삭제량과 상아질 두께에 따른 온도변화, 그리고 삭제형태를 조사, 분석하여 다음과 같은 결과를 얻었다. 1. 레이저 조사세기와 pulse repetition rate가 클수록, 그리고 조사시간이 길수록 삭제량이 증가되었다(P<0.05). 그러나 5Hz의 pulse repetition rate에서는 조사시간에 따른 삭제량의 차이가 크지 않았다. 2. 삭제된 와동은 비교적 변연부가 명확하고 깨끗하였으며 와동의 바닥은 원추형이였으며 부드러웠다. 조사세기와 pulse repetition rate가 클수록, 그리고 조사시간이 길수록 와동의 상부 직경이 넓었으며 150mJ, 5Hz, 5sec에서는 와동변연부에 약간의 crack이 관찰되었다. 3. 레이저 조사세기와 pulse repetition rate가 클수록, 그리고 조사시간이 길수록 상아질의 온도가 더 많이 상승하였으며 시편의 두께가 두꺼울수록 온도상승이 적었다(P<0.05). 4. 물을 분사하며 레이저를 조사할 경우 물을 분사하지 않은 경우에 비해 온도상승이 매우 감소되었다(P<0.05). 이상의 결과를 종합해 볼 때 Er : YAG 레이저를 상아질에 조사할 경우 와동의 형태가 명확하고 물을 분사할 경우 온도상승이 많이 유발되지 않으므로써 삭제력이 좋고 치수에 유해작용이 없는 것으로 생각된다. 향후 임상에서 치질을 제거하는데 효율적으로 이용되기 위해서는 더욱 크고 이에 따른 온도상승을 최소로 할 수 있는 조사 시스템 및 방법에 대한 연구가 계속적으로 이루어져야 할 것으로 사료된다.