• 전기전자학회논문지
• /
• 제5권2호
• /
• pp.201-210
• /
• 2001

광 시분할 및 파장분할 다중화에 의한 초고속 광통신 시스템에 적합한 파장 및 반복율 가변 능력을 갖는 초단 펄스열을 고리형 반도체 광섬유 레이저의 광주입 모드잠김에 의해 발생시켰다. 발생된 광 펄스열은 10 GHz, 20 GHz, 30 GHz, 및 40 GHz의 다양한 반복율에서 ${\sim}10$ 피코초 정도의 펄스폭과 30 nm가 넘는 파장 가변능력을 보였다.

• 국제물리치료학회지
• /
• 제1권2호
• /
• pp.185-191
• /
• 2010

Background: This study investigated effective posture for gluteus medius rehabilitation training and effects of isometric muscle activity by electrophysiology through EMG while performing dynamic isotonic behavior of weight placed differently on upper limbs. Method: 16 healthy male subjects 20 to 29 years of age volunteered for the study. Lateral stabilizer right gluteus medius activity was assessed using EMG while the right lower extremity maintains single limb support, and the left upper extremity elevation movement maintains 5 seconds without load, 1RM to 1 repetition, 5RM to 5 times, 10RM to 10 times, 5RM and 10RM maintain 5sec. Results: Comparison of the mean value of EMG data showed a statistically more significant difference in upper extremity elevation movement on opposite upper extremity added weight than one that was not added on a single limb weight bearing posture(p>.05). Weight supported side gluteus medius activity for 1RM, 5RM, 10RM weight difference and movement repetition did not differ(p>.05). Comparison in maximum value showed statistically significant differences in not adding weight on upper limb elevation exercise and 1RM, 5RM, 10RM repeated behavior. Elevation behavior and repetition appeared over 70% of MVIC. Conclusion: Unilateral weight bearing stance added weight in the opposite upper limb elevation movement was an indirect exercise to effectively stimulate gluteus medius activity. Applying various added weight will have effective exercise on the early stages of rehabilitation because activity gluteus medius did not differ through added weight.

• 음성과학
• /
• 제11권2호
• /
• pp.105-117
• /
• 2004

Recently, many scholars have emphasized the importance of English listening ability for smoother communication. Most audio materials, however, were recorded in a quiet sound-proof booth. Therefore, students who have spent so much time listening to the ideal audio materials are expected to have difficulty communicating with native speakers in the real life. In this study, we examined how well thirty three Korean university students and five native speakers will repeat the recorded English sentences under noise and speed conditions. The subjects' production was scored by listening to each recorded sentence and counting the number of words correctly produced and determined the percent ratios of correctly produced words to the total words in each sentence. Results showed that the student group correctly repeated around 65% of all the words in each sentence while the native speakers demonstrated almost perfect match. It seemed that the students had difficulty perceiving and repeating function words in various conditions. Also, high-proficiency student group outperformed the low-proficiency student group particularly in their repetition of function words. In addition, the student subjects' accuracy of repetition remarkably dropped when the normal sentences were both sped up and mixed with noise. Finally, it was observed that the Korean students' percent correct ratio fell down as the stimulus sentence became longer.

• 반도체디스플레이기술학회지
• /
• 제6권1호
• /
• pp.11-15
• /
• 2007

Low-k wafer engraving process has been investigated by using UV pico-second laser with high repetition rate. Wavelength and repetition rate of laser used in this study are 355 nm and 80 MHz, respectively. Main parameters of low-k wafer engraving processes are laser power, work speed, assist gas flow, and protective coating to eliminate debris. Results show that engraving qualities of low-k layer by using a laser with UV pico-second pulse width and high repetition rate had better kerf edge and higher work speed, compared to one by conventional laser with nano-second pulse width and low repletion rate in the range of kHz. Assist gas and protective coating to eliminate debris gave effects on the quality of engraving edge. Total engraving width and depth are obtained less than $20\;{\mu}m$ and $10\;{\mu}m$ at more than 500 mm/sec work speed, respectively. We believe that engraving method by using UV pico-second laser with high repetition rate is useful one to give high work speed in laser material process.

• 한국음향학회지
• /
• 제37권3호
• /
• pp.139-146
• /
• 2018

단상태 소나는 음원의 송신시간과 반사파의 수신시간 정보를 이용하여 표적의 위치를 산출한다. 그러나 음원의 송신시간 정보를 수신센서와 공유하지 않는 비동기 양상태 소나 시스템에서는 표적의 위치를 산출하기 위해 수신센서에서 음원의 직접파(direct blast)를 탐지해야한다. 본 논문에서는 직접파에 대한 PRI(Pulse Repetition Interval)와 적응적인 임계치 추정을 통해 직접파 탐지를 수행하는 기법을 제안한다. 모의 신호 및 해상 실험 데이터를 이용하여 제안하는 기법의 성능을 분석하였고 그 결과 강한 배경소음 및 직접파와 유사한 다수의 표적 반사파가 존재하는 환경에서도 강인한 직접파 탐지 성능을 보여주었다.

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.357-361
• /
• 2013

A regenerative Er-doped fiber amplifier system for a high-repetition-rate optical pulse train is investigated for the first time. A signal pulse train with a wavelength tuning range of 18 nm is produced by a passive mode-locked fiber laser based on a nonlinear polarization rotation technique. In order to realize the amplification, an optical delay-line is used to achieve time match between the pulses' interval and the period of pulse running through the regenerative amplifier. The 16 dB gain is obtained for an input pulse train with a launching power of -30.4 dBm, a center wavelength of 1563.4 nm and a repetition rate of 15.3 MHz. The output properties of signal pulses with different center wavelengths are also discussed. The pulse amplification is found to be different from the regenerative amplification system for CW signals.

• 미국학
• /
• 제34권1호
• /
• pp.181-202
• /
• 2011

The purpose of this paper is to examine Paul Auster's Leviathan according to Slavoj Žižek's theory. Analyzing the characters in Leviathan, this paper chiefly discusses the postmodern subject's anxiety and obsessive repetition that the lack of the big Other led to. Section II explains the disintegration of the big Other and the subject's anxiety and obsessive repetition by the interpretation of the characters: Peter Aaron, Maria Turner, and Benjamin Sachs. Aaron wants to write on Sachs's life to overcome his uneasy subject's condition, and to establish the consistent and whole world. But his writing fails to meet his desire, owing to uncertainty of his understanding, and the incompleteness of his writing. In case of Maria, her uneasy subject's condition led to her obsessively repetitive picture-shooting herself and others, which proved to be a meaningless struggle for filling the void of the big Other and herself. Although Sachs already knows the lack and inconsistency of the big Other, he also repetitively tries to establish the consistent and whole Other. In Section III, this paper examines Sachs's terror as he struggles for the preservation of the big Other. His extreme striving also fails to reestablish the big Other as it loses its symbolic effectiveness in the postmodern era because he does not grasp the big Other as an empty Symbolic order, and rejects the premise of the big Other itself.

• 한국전기전자재료학회논문지
• /
• 제28권6호
• /
• pp.360-364
• /
• 2015

Electronic systems based on solid state devices have changed to be more complicated and miniaturized as the electronic systems developed. If the electronic systems are exposed to HPEM (high power electromagnetics), the systems will be destroyed by the coupling effects of electromagnetic waves. Because the HPEM has fast rise time and high voltage of the pulse, the semiconductors are vulnerable to external stress factor such as the coupled electromagnetic pulse. Therefore, we will discuss about malfunction behavior and DFR (destruction failure rate) of the semiconductor caused by amplitude and repetition rate of the pulse. For this experiment, the pulses were injected into the pins of general purpose IC due to the fact that pulse injection test enables the phenomenon after the HPEM is coupled to power cables. These pulses were produced by pulse generator and their characteristics are 2.1 [ns] of pulse width, 1.1 [ns] of pulse rise time and 30, 60, 120 [Hz] of pulse repetition rate. The injected pulses have changed frequency, period and duty ratio of output generated by Timer IC. Also, as the pulse repetition rate increases the breakdown threshold point of the timer IC was reduced.

• 한국컴퓨터산업학회논문지
• /
• 제2권8호
• /
• pp.1055-1062
• /
• 2001

본 연구에서는 1KHz 부근의 펄스 반복율을 가지는 경제적이고 컴팩트한 펄스형 $CO_2$ 레이저의 개발에 관해서 기술하였다. 고압 고주파 펄스 변압기와 수 십 KHz의 스위칭에 적합한 IGBT를 사용한 고압 펄스전원 장치를 레이저 공진기에 접목시켜 새로운 방식의 고반복 $CO_2$ 레이저 장치를 개발하였다. 전원장치에 사용된 2개의 IGBT를 정밀하게 제어하기 위해서 제어부에는 PIC 마이크로프로세서가 사용되었고 공진기는 수냉방식의 저속축류형으로 제작되었다. 완성된 장치의 펄스 반복율과 동작압력 그리고 레이저 매질 가스의 혼합비의 변화에 따른 레이저빔의 출력 특성실험을 통하여 가스 배압비 $CO_2$： $N_2$：He ＝ 1：9：15펄스 반복율 700 Hz, 동작압력 15 Torr에서 최대 레이저 출력 약 20.5 W, 최대 효율 약 8%를 달성하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1072-1074
• /
• 1999

In this study, it is the purpose to develope a cheap and compact pulsed $CO_2$ laser with pulse repetition rate range of 1 kHz. We used a IGBT switched power supply as a power supply, which is cheap and simple comparing to others. PIC one-chip microprocessor was used for precise control of a laser power supply on the control part. And the laser cavity was fabricated as an axial and water cooled type. The laser performance characteristics as various parameters, such as pulse repetition rate gas pressure, and gas mixture rate have been investigated. The experiment was done under the condition of total pressure of $CO_2:N_2$:He = 1.3:10, 1:1.5:5 1:9:15 from 6 Torr to 15 Torr and pulse repetition rate from 100 Hz to 900 Hz. As a result, the maximum average output was about 20.5 W at the total pressure of 15 Torr, the gas mixture $CO_2:N_2$:He = 1:9:15 and the pulse repetition rate of 700 Hz.