• Fashion & Textile Research Journal
• /
• v.13 no.6
• /
• pp.972-982
• /
• 2011

The purpose of this study is to improve the method of color developing with alkali solution as a promotor of color developing for feasible use. Cotton fabric was dyed with persimmon extract ranged with 0~3% alkali component with 5 types of strong to mild alkali solution. Heat treatment for color developing was applied to fabric dyed with persimmon extract and alkali mixing solution. Tests were carried out to analyze the change of surface color, ${\Delta},Ea^*b^*$, and water repellent of the dyed cotton fabric. The alkali mixing sample showed higher ${\Delta},Ea^*b^*$ value than control one without alkali mixing on the base of dyed fabric due to high color developing by alkali in the initial step of dyeing process. As alkali concentration increased, deeper dark color appeared on the fabric. The fabric color was changed to more dark in the application of sodium hydroxide, sodium carbonate, potassium carbonate in the initial step of dyeing process but color was not changed by increased heating time. However, the fabric showed a slight dark color with sodium acetate and more color change than that of the fabric dyed with persimmon extract without alkali. Therefore, sodium acetate seemed to a suitable promotor for color developing in persimmon extract dyeing. Property of water repellent was showed after color developing by heating with low concentration of alkali treatment.

• Fibers and Polymers
• /
• v.6 no.4
• /
• pp.343-347
• /
• 2005

The purpose of this study was to investigate the appropriate amounts of phase change materials to give objective and subjective wear sensations. Vapor-permeable water-repellent fabrics with (WR-PCM) and without (WR) octadecane containing microcapsules were obtained by wet-porous coating process. Then, calculating the area of the WR-PCM treated clothes, we estimated the total calories of the clothing by multiplying the heat of fusion and heat of crystallization of PCM to the calculated area. Wear tests were conducted in both warm environment $(30^{\circ}C,\;65\%\;RH)$ and cold environment $(5^{\circ}C,\;65\%\;RH)$ with sports warm up style experimental garments made with WR and WR-PCM fabrics. Rectal, skin, and clothing microclimate temperatures, saliva and subjective evaluation measurements were done during the wear test. There was no difference of rectal and mean skin temperatures between WR and WR-PCM, but the clothing microclimate temperature of WR-PCM under warm environment was slightly lower than that of WR. In cold environment, WR-PCM showed much higher temperature than in WR. Saliva change did not appear between clothes, but did between two environments. Although subjective sensation between WR and WR-PCM was not significantly different, WR-PCM was rated as cooler than WR in warm environment and as warmer than WR in cold environment. The results of this study indicated that octadecane containing microcapsules in water-repellent fabric provide cooling effect.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.2
• /
• pp.60-69
• /
• 2004

Application methods of chemicals were investigated to minimize strength reduction of corrugated boards under the high humidity environment encountered in the cold chain system. Starch insolubilizers were introduced in the starch solution preparation of the Stein hall method and their insolubilization effect of starch binder were estimated. The performance of water repellent agents(WRA) and moisture proof agents(MPA) were evaluated in terms of water and moisture resistance. And effects of the combination of the chemicals and the coating method were also examined. Addition of the polyamine polyamide insolubilizer to the main part in the Stein hall process improved the binding force and water resistance of starch, which contributed to minimize the strength reduction of paper under the high humidity environment. AZC and Glyoxal type insolubilizers could not be used in the experiment due to an excessively increased viscosity of starch solution and the poor stability. Conventional WRA treatment to the base paper enhanced water and moisture resistance very slightly even though water repellency of the paper reached R10 by the treatment. MPA showed excellent performance than WRA not only in water and moisture resistance but in water repellency. Double coating on paper with MPA was more effective than the single coating at the same coating weight. A newly developed MPA showed excellent performance and runnability only by a single coating instead of a double coating.

• Environmental Analysis Health and Toxicology
• /
• v.7 no.1_2
• /
• pp.1-16
• /
• 1992

Biologically, MGK-264 (N-octyl bicycloheptene dicarboximide) acts as a synergists for insecticides mainly pyrethrins and pyrethroids. It's used extensively in combination with pyrethrin and piperonyl butoxide and also with personal insect repellent and cockroach repellents. But the toxic effect of MGK-264 in mamalians was a relatively little known therefore in this studies it was initiated to examine the toxic effect of MGK -264 in rats. For 5 weeks it administrated daily in each 250 mg and 500 mg of MGK-264 per kg of body weight in rats. 1) The body weight gain and the LYMPH (%) value in blood were observed a slight tendency to reduce in accordance with amount of dose and number treatment time. 2) The content of cytochrome P-450 and activity of NADPH-cytochrome c reductase were decreased in liver and those were observed some tendency in the kidney as liver but not significant. 3) The liver cholinesterase activity in the both 250 mg/kg and 500 mg/kg per kg of body weight with treated groups and the liver aniline hydroxylase in 500 mg/kg treated group were gradually decreased from 4 weeks after treated groups. In consequence it would sugested that the toxic effect of MGK-264 was low but in could offer hazard effect in liver and nervers system of rats if it was administrated move dose of MGK-264 and agumented in number of treated time.

• Applied Biological Chemistry
• /
• v.48 no.2
• /
• pp.150-154
• /
• 2005

To overcome the problems associated with chemical pesticides, biological pest controls agent extracted from Ginkgo biloba was studied. Insecticidal activities components in Ginkgo biloba extracts were analyzed using high performance liquid chromatography (HPLC). This results of HPLC analysis, GG-W80 were included bilobalide $611\;{\mu}g/kg$, ginkgolide A $37\;{\mu}g/kg$ and ginkgolide B $243\;{\mu}g/kg$, while YG-W80 were included bilobalide $214\;{\mu}g/kg$ and ginkgolide B $46\;{\mu}g/kg$. The biological activity of Ginkgo biloba extracts were conducted to repellent and pesticidial effect of Tetranichus urticae, Aphis gossypii and Myzus persicae treated with Ginkgo biloba leaves extracts. Mortalities of adult T. urticae to green Ginkgo biloba extracts (GG-W80) and yellow Ginkgo biloba extracts (YG-W80) were shown 98.3% and 20.0%, respectively. From these results, terpenes components in Ginkgo biloba extracts could be use for biological controls for T. urticae.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.87-91
• /
• 2008

It is commonly known that water repellency of the fabric treated with fluorocarbon resin brings about a decrease by the washing and recovers by the subsequent heat treatment. In this article, effect of the water repellency was investigated on the nylon 6, triacetate and silk fabrics treated with hydrocarbon and silicon resins. Hydrocarbon and silicon resins have been widely used in the textile finishing as the softening and water proofing agents. The fabrics were treated with hydrocarbon resins, Paragium JQ and RC (Ohara Paragium Chemical Co.) and a silicon resin, Poron MR (Shinetsu Chemical Co.), and then washed and subsequently heat treated. Although the water repellency increased by the resin treatment, it decreased by the washing apparently and recovered a little by the heat treatment. The effect of the heat treatment was small comparing with that of the fluorocarbon resin. Furthermore, as a mechanical property of the treated fabric, KES shearing and bending hysteresis parameters, modulus and hysteresis width of the hydrocarbon resin-treated nylon 6, triacetate and silk fabrics decreased by the heat treatment after washing. Therefore, the treatment is effective at improving the softening of the fabric in water repellent finish.

• Textile Coloration and Finishing
• /
• v.3 no.4
• /
• pp.22-28
• /
• 1991

Perfluoropropene was plasma polymerized in the form of thin film on PET fabrics to give hydrophobic and barrier properties without affecting air permeability. Changes in surface characteristics were detected by application of ESCA, IR, SEM and contact anglemeter. The surface properties was changed markedly to be water and stain repellent although the effect was not much sensitive to the differences of chemical components of the thin films formed at different experimental conditions. The protective barrier characteristics of the thin film was also applicable to suppress the amounts of dyes extracted from fabrics in laundering.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.203-209
• /
• 1997

An experimental study to evaluate to evaluate corrosion protection systems was undertaken with 44 reinforced concrete slab specimens subjected to cyclic wet and dry saltwater exposure. Corrosion measurements included monitoring macrocell corrosion currents, which are genrerally accecpted in United States practice. Test results indicate that specimens containing 2 kg/$\textrm{m}^3$ of NaCl and exposed to wet(outdoor) and dry(indoor) conditions but not to saltwater show very low values of corrosion measurements regardless applying any corrosion protective systems. Corrosion currents of the specimens exposed at 10 percent of NaCl were higher than that of the specimen exposed at 5 percent of NaCl, so the density of the salt water had an influential effect on the test. For the specimens with water repellent membrane currents kept relatively low numerical values, but test specimens with surface corrosion inhibitor protective system showed high values of corrosion current. It would be expected that evaluation of the corrosion protective systems need long-term measurement.

• Korean Journal of Organic Agriculture
• /
• v.23 no.4
• /
• pp.911-921
• /
• 2015

We evaluated two herbal plants, basil (Ocimum basilicum) and lemon balm (Melissa officinalis), for their potential as repellent plants in the management of striped flea beetle (Phyllotreta striolata), in organic production of chinese cabbage. It was confirmed that striped flea beetle avoided these two herbal plants in olfactometer experiment. We conducted field experiment in which the suppressive effect of the two selected herbal plants and cruciferous crops preferred by striped flea beetle were evaluated through cultivating as inter crops and border crops, respectively. In inter-cropping experiment, unlike in vitro test, the density of striped flea beetle was low in basil- or mustard-intercropping cultivation plot, but high in lemon balm-intercropping cultivation plot. In border cropping experiment, the density of striped flea beetle on chinese cabbage in lemon balm or basil cultivation plot were approximately zero. As a result of this study, we think that border cropping of lemon balm or basil can be used to reduce preventively striped flea beetle of chinese cabbage under organic farming system.

• Applied Microscopy
• /
• v.42 no.2
• /
• pp.95-103
• /
• 2012

The cell surface sculpture of the plant epidermis has received great interest recently. It has also been an active area of research, as the biological microstructures of the surface, such as papillae and waxes, exhibit several unique properties, including self-cleaning character; namely the "Lotus effect" first described in the leaves of the lotus, Nelumbo nucifera. The Lotus effect is the phenomenon in which the super-hydrophobic and water-repellent nature of lotus leaves allow water drops to run off easily on the surface in a rolling and sliding motion thereby facilitating the removal of dirt particles. It is well-known that surface roughness on the micro- and nanoscale is a primary characteristic allowing for the Lotus effect. This effect is common among plants and is of great technological importance, since it can be applied industrially in numerous fields. In the present study, Nelumbo nucifera leaf and stem epidermal surfaces have been examined with a focus on the features of papillae and wax crystalloids. Both young and mature Nelumbo nucifera leaf epidermis demonstrated the Lotus effect on their entire epidermal surface. The central area of the upper epidermis, in particular, formed extremely papillose surfaces, with an additional wax layer, enabling greater water repellency. Despite the presence of wax crystalloids, epidermal surfaces of the lower leaf and stem lacking papillae, were much more easily wetted.