• 한국구조물진단유지관리공학회 논문집
• /
• 제8권2호
• /
• pp.231-238
• /
• 2004

R/C교량에서 진행성 균열과 과도한 처짐에 의한 휨 내력의 저하는 차량하중에 의한 동적 반복하중으로부터 발생한다. 이러한 사실은 정적인 단조증가 하중 재하실험으로부터 획득한 자료의 동적 반복하중에서의 확인과 평가의 필요성을 제기한다. 따라서, 본 연구는 CFS로 보강된 R/C보를 단조증가하중 재하실험과 반복하중 재하실험을 동시에 수행하였다. 동적 반복하중 재하실험에 의하여, 단조증가하중 재하실험에 의한 결과의 타당성 및 적합성을 확인하고 반복하중에 의한 모멘트-곡률, 휨 강도의 감소, 균열 및 파괴 특성 등을 평가하였다.

• 인지과학
• /
• 제16권4호
• /
• pp.255-270
• /
• 2005

항목이 연달아 반복되는 경우(집중반복)보다 간격을 두고 반복되는 경우(간격반복) 기억 수행이 더 우수한 현상을 간격효과라 한다. 단서기억과제(재인과제)의 간격효과 및 성공적 부호화와 관련된 신경기전을 밝히기 위해 event-related fMRI연구를 수행하였는데, 부호화단계에서 단어의 반복제시 간격을 조작하고서 fMRI 영상을 구하였다. 그 결과, 재인 수행에서 전형적인 간격효과가 관찰되었고 집중반복조건에 비해 간격반복조건 뿐만 아니라 비반복조건에서 좌반구의 배외측 전두피질(DLFC), 복외측 전두피질(VLFC)의 높은 활성화가 관찰되었다. 이러한 결과는 간격효과 및 이와 관련된 성공적 부호화가 높은 수준의 주의통제와 의미적 처리에 기인한다는 것을 시사한다.

• Journal of Microbiology and Biotechnology
• /
• 제17권7호
• /
• pp.1208-1212
• /
• 2007

Production of extracellular epothilone B, one of the potent anticancer agents, by free and immobilized Sorangium cellulosum was studied using the repeated batch culture process. The concentration of alginate used in immobilization was directly related to the mass transfer rate of nutrients, mechanical stability, and the epothilone B production yield. With the optimized 3% (w/v) calcium alginate carrier, a prolonged repeated batch culture was investigated for the 5 repeated batches for 24 days. The maximum productivity of epothilone B obtained from the alginate-immobilized cells was 5.03 mg/l/day, which is 3 times higher than that of free cells (1.68 mg/l/day).

• 항공우주시스템공학회지
• /
• 제2권4호
• /
• pp.7-12
• /
• 2008

Averaged heat transfer coefficients were measured in a turbine blade internal cooling passage model with three blockage walls. Each blockage wall was equipped with 9 staggered holes or slots in order to create different shaper of repeated jet impingement. The effect of jet shape on the averaged heat transfer coefficient was studied by the copper-thermocouple method and three Reynolds number of 10,000, 20,000, and 30,000 were tested. Results showed that the repeated stagger jets could increase the averaged heat transfer coefficient by at least 9 times compared to the smooth channel cases. Due to the large pressure drop induced by the repeated jet impingement, the thermal performance was less than 1 for all cases and decreased as the Reynolds number increased. Among the tested cases, the widest slot showed the best thermal performance. The measurement results showed that the thermal performance of the heat transfer augmentation by repeated stagger jets could be improved by altering the jet shape, and other shape of impingement jet will be studied in near future.

• Toxicological Research
• /
• 제15권1호
• /
• pp.27-34
• /
• 1999

To study the nature of differentially manifested adaptive response of an organism according to the intensities of the stress, the immune effects of different levels of repeated hypoxia were investigated. Four experimental groups (NH : not -handled, 20% : handled, 15% or 10% : exposed to 15% or 10% $\textrm{O}_2$ 씨오투 with balanced nitrogen, respectively) of mice were exposed to different levels of hypoxia for 60 min/day, 5days/week in a repeated and intermittent manner. After 8 weeks' exposure to hypoxia environment, mice were subjected to immune function measurements, A decreased proportion of CD3+ CD8 phenotype cells in the study of splenocyte subsets was observed in the 10% group. Ovalbumin-stimulated IgG2a production was increased in the 15% group, while no changes were noted in the IgGl and IgM production. No significant changes of the antigen-stimulated splenocyte proliferation and the natural killer cell cytotoxicity were found. These results show that the stress effects on the immune systems can be varied according to the strength of the stress and that a mild level of repeated hypoxic stress can enhance the immune function of mice in this experimental model.

• 중환자간호학회지
• /
• 제6권2호
• /
• pp.24-36
• /
• 2013

Propose: This study was to investigate the educational effect and retention of repeated simulation-based basic life support (BLS) training for nursing students. Methods: A comparison group design with pretest and posttest was used. A total of 35 nursing students (18 for the experimental group, 17 for the control group) participated in the study. A repeated simulationbased BLS training program which include a lecture, skills training, and two repeated sessions of simulation practice and debriefing was provided twice for experimental group. Knowledge, self-efficacy, and skill performance of cardiopulmonary resuscitation (CPR) were measured three times: at baseline, week 2, and week 6. Descriptive analysis, repeated measures ANOVA, and t-test were used for data analyses. Results: Knowledge, self-efficacy and skill performance of CPR were not significantly changed by group assignment, by the time, and interaction of group by time. Effectiveness of intervention was not maintained until Week 6. Conclusion: The results suggest that the timing of repeat education, total training time, and students' mastery of CPR performance should be considered when developing simulation-based programs to improve and maintain students' CPR knowledge, self-efficacy, and skill performance.

• Toxicological Research
• /
• 제20권2호
• /
• pp.123-129
• /
• 2004

The present study was conducted to investigate the single and 2-week repeated dose toxicity of DHP2, a hydrophobic drug delivery vehicle, in ICR mice. The test article was administered orally to mice at the dose levels of 2.5, 12.5 and 37.5 g/kg for single dose toxicity study and at the dose levels of 0, 2.5, 5, and 10 g/kg for repeated dose toxicity study. In both studies, there were no treatment-related effects on mortality, clinical signs, food and water consumption, ophthalmoscopy, urinalysis, hematology, serum biochemistry, necropsy findings and organ weights of all animals treated DHP2. Based on these results, it was concluded that the 2-week repeated oral dose of DHP2 may have no toxic effect in mice at a dose level of 10 g/kg. In the condition of this study, the no-observed-adverse-effect level (NOAEL) was considered to be 10 g/kg/day for both sexes.

• The Journal of the Acoustical Society of Korea
• /
• 제26권2E호
• /
• pp.39-43
• /
• 2007

Music summarization refers to a technique which automatically extracts the most important and representative segments in music content. In this paper, we propose and evaluate a technique which provides the repeated part in music content as music summary. For extracting a repeated segment in music content, the proposed algorithm uses the weighted sum of similarity measures based on multi-level vector quantization for fixed-length summary or optimal-length summary. For similarity measures, count-based similarity measure and distance-based similarity measure are proposed. The number of the same codeword and the Mahalanobis distance of features which have same codeword at the same position in segments are used for count-based and distance-based similarity measure, respectively. Fixed-length music summary is evaluated by measuring the overlapping ratio between hand-made repeated parts and automatically generated ones. Optimal-length music summary is evaluated by calculating how much automatically generated music summary includes repeated parts of the music content. From experiments we observed that optimal-length summary could capture the repeated parts in music content more effectively in terms of summary length than fixed-length summary.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권6호
• /
• pp.670-682
• /
• 2018

This paper presents the experimental and numerical investigation results of the response of low-temperature steel (LT-FH32 grade steel) beams under repeated impacts at room temperature and a single impact at a sub-zero temperature. After conducting tensile tests at room and sub-zero, repeated impact tests were conducted on two clamped single-beam models at room temperature, and single-impact tests of two other clamped single-beam models were conducted at $-50^{\circ}C$. The single and repeated impact tests were conducted by releasing a knife-edge striker using a drop testing machine. The permanent deflection of the model measured after each impact gradually increased with increasing number of impacts. Under the reduced temperature, the permanent deflection of the models slightly decreased. The numerical analyses were also performed to predict the damage response of the tested single-beam models. A comparison of the numerical prediction with those of experiments showed quite reasonable agreement.

• Journal of Korean Neurosurgical Society
• /
• 제30권2호
• /
• pp.211-216
• /
• 2001

Hemorrhage due to capillary telangiectasia is rare. We report a case of capillary telangiectasia presenting with repeated cerebellar hemorrhage in a 38-year-old male. To our knowledge this is the first case of repeated cerebellar hemorrhage from the capillary telangiectasia. At the first operation, we removed hematoma only, but rebleeding occurred repeatedly in the same area. Finally, we evacuated the recurrent hematoma and vascular mass of capillary telangiectasia at the second operation under surgical microscope. Based on the findings of this case and a review of the literature, we conclude that capillary telangiectasia can be the cause of the massive repeated hemorrhage.