• 한국구조물진단유지관리공학회 논문집
• /
• 제22권1호
• /
• pp.32-39
• /
• 2018

염해에 따라 발생하는 보수시기와 보수로 유지되는 내구수명은 보수비용 평가에 매우 중요한 요소이다. 일반적으로 사용하는 결정론적 보수비용 평가는 사용기간의 연장에 따라 계단식으로 증가하게 되며, 보수로 인해 변동되는 내구수명의 변화를 고려하지 못한다. 본 연구에서는 확률론적인 보수시기 및 비용을 평가하기 위해, 염해에 노출된 콘크리트 교각을 선정하였다. 두 가지 배합과 염화물에 노출된 외부 환경조건을 고려하여 염화물 거동을 평가하였으며, 도출된 내구수명과 수명에 대한 확률변수를 변화시키면서 보수시기 및 비용 변화를 분석하였다. 변동계수의 변화에 따른 보수회수는 큰 차이가 발생하지 않았으나, 초기의 내구수명 연장이 구조물의 보수시기 및 비용에 큰 영향을 미치고 있었다. 또한 확률론적 보수비용 산정 모델은 결정론적 모델과 다르게 연속적인 보수비용이 평가되므로 목표내구수명에 따라 보수회수를 감소시킬 수 있는 효과적인 기법임을 규명되었다.

• 한국건설관리학회논문집
• /
• 제12권6호
• /
• pp.142-150
• /
• 2011

공동주택의 가치와 품질, 관리에 대한 요구와 관심이 증가하면서, 2000년대 이래로 입주자에 의한 권리주장이 하자분쟁으로 나타나, 꾸준히 증가하여 왔다. 이에 본 연구에서는 하자소송판례를 통해 균열 쟁점의 비용적 특성을 알아보기 위하여, 하자보수비용 중 77%를 차지하고 있는 균열하자보수비에 대한 세부쟁점을 분석하였다. 또한, 각 세부 쟁점에 대한 하자보수 비용의 구성 및 하자보수방법에 따른 비용의 차이 등을 분석하였다. 그 결과, 허용균열폭의 인정여부에 따라 균열보수비용의 차이가 발생함을 확인할 수 있었고, 보수보강방법을 표면처리, 충전식, 주입식 공법 중 어느 것을 선택하느냐에 따라 비용 차이가 크게 발생함을 알게 되었다. 한편, 도장방법에 따른 하자보수비용의 차이도 상당한 것으로 나타났다.

• 한국자동차공학회논문집
• /
• 제11권2호
• /
• pp.182-189
• /
• 2003

We have found that the damage of the front part for a vehicle and that of the rear part for a vehicle are the majority of frequency experienced by the traffic accidents. In conventional bumper system was designed by safety standard regulation at low speed crash. For example there are 2.5 mile and 5 mile bumper. The conventional bumper system was the crash from max 5.5 mile to 3 mile low speed occurs most frequently and results in the highest rate of repairing cost in statistically. On this study, in order to check the damageability and repairability of gas tube bumper system RCAR 15 km/h 40 % offset frontal crash test was adopted in low speed and we have a gas tube bumper parts test and vehicle test with gas tube bumper, we can find gas tube bumper system definitely can improve the damageability and repairability of the vehicles and contribute to down the repairing cost.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.114-115
• /
• 2013

The maintenance and repair period consists the largest part of a construction project life cycle cost. However, it has been analyzed that the repairing plan relies on regulations and the officers' experience mostly that sometimes lead to performing unnecessary work. Moreover, the data occurred during repairing have not been stored in a system that can be used in future plans. Therefore, the purpose of this study is to suggest a repairing cost and time predicting model by applying the properties of the building.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.43-48
• /
• 2001

To overcome the disadvantages of conventional excavation technology, various trenchless (or excavation free, or no-dig) repair-reinforcement technologies have been developed and tried. But trenchless technologies so fat developed have some brawbacks such as high cost and inconvenience of operation. In this study, a repairing-reinforcing process for underground pipes with glass fiber fabric polymer composites using VARTM(Vacuum Assisted Resin Transfer Molding) has been developed. The developed process requires shorter operation time and lower cost with smaller and simpler operating equipments than those of the conventional trenchless technologies. For the reliable operation of the developed method, a simple method to apply pressure and vacuum to the reinforcement was devised and flexible mold technology was tried. Also, resin filling and cure status during RTM process were monitored with a commercial dielectrometry cure monitoring system, LACOMCURE. From the investigation, it has been found that the developed repairing-reinforcing technology with appropriate process variables and on-line cure monitoring has many advantages over conventional methods.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2001년도 학술논문발표회
• /
• pp.136-141
• /
• 2001

If we build new building after demolition of commercial building that is located in the downtown, it will be caused a social and environmental problem as wasting of resources and generating of waste. In this study, I investigated about remodel ins, this conclusion is given below. 1. Reconstruction cost is 2.1 times, and construction period is 1.4 times as much remodeling. So remodeling has an advantage. 2. For repairing and reinforcing timeworn building, we reinforced it as using carbon fiber sheet (girder, slab) and injecting method steel plate bonding Also, we tried to maintain efficiency of new building as using epoxy to protect concrete crack. 3. In the side of waste products and cost, remodeling has much more advantage than reconstruct. But demolition used construction period much. Because it had to be reused as repairing and reinforcing. And there was no difference between remodeling cost and reconstruct cost. If we develop research with enterprise.university.laboratory to exploit material and equipment and to train specialized engineer who will has a capacity to know construct repair and reinforce, it can be attribute to prevail remodeling in new construct market.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.159-167
• /
• 2014

PURPOSES : The purpose of this study is to analyze the requirements of the road traffic safety moderator robot when road repairing. The road traffic safety moderator robot is road traffic safety equipment and to conversions mechanical engineering and IT when road repairing. METHODS : The study used AHP based on the survey from road repair related expert that field engineers, design engineers, public officials and professors. The survey used paired comparison. The survey items were safety, convenience and economics. The safety is classified as visibility or efficiency, the convenience is classified as utility or mobility and the economics is classified as initial investment cost or maintenance $ management cost. The survey alternatives were the road traffic safety moderator robot, traffic regulation by human, traffic regulation by mannequin and traffic signs. The software for AHP is Expert Choice 2000. RESULTS : The results of AHP analyze, the weighted value of safety was analyzed with the highest at 0.488 of survey items. The weighted value of convenience was analyzed at 0.295, the weighted value of economics was analyzed at 0.218. The results of the road traffic safety moderator robot, the weight value of efficiency and utility were analyzed with the highest at 0.284 and 0.259 of alternatives. The weighted value of initial investment cost and maintenance & management cost were analyzed with the lowest at 0.203 and 0.211 of alternatives. The consistency test results of each items, null hypothesis is rejected because the CR values were 0.000 respectively. Therefore, the study results are consistency. CONCLUSIONS : The result of this study, overall value of the road traffic safety moderator robot came off second-best of other alternatives. The road traffic safety moderator robot has been received highest praise by the result of the study as good road traffic safety equipment when road repairing because the weighted values of efficiency and utility were analyzed with the highest of survey items. The efficiency mean securing safety and the utility mean practical assistance when road repairing. The results of this study showed that the road traffic safety moderator robot will effective for traffic safety when road repairing. economics and visibility are that supplementation of the road traffic safety moderator robot because the weighted values of economics and visibility were analyzed with the lowest of survey items. The consistency test results are consistency because the CR values were 0.000 respectively.

• 대한방사선치료학회지
• /
• 제6권1호
• /
• pp.21-30
• /
• 1994

To analyze the states of operation of radiotherapy facilities in the period from 1979 to 1992 and to get the base for efficient operation and maintenance of the radiotherapy facilities. Data on the records of annual number of patients operated by each facility; span of suspension of operation, the cost and span of repairing, and parts of oui-of-order in the period from 1979 to 1992 were analyzed. We made a comparative analysis of average annual number of patients, annual span of the suspension of operation, annual cost ratio of repair, span of repairing per break down, and total number of broken parts. We could get following annual number of patients(day), span of the suspension of span ($\%$)(day). annual cost ratio fo repair($\%$), span of repairing per break down(Min-Max, day), and number of broken parts from this analysis. 1. Cobalt unit (Picker C-9) : 10,389(43), 0.4(0.83) 0.07, 1hr-2, 3 2. Linac(Clinac 6/100) : 11,492(50), 4.0(9.57), 0.98, 1hr-30, 12 3. Linac(Clinac 18) : 9.115(44), 12.7(30.5), 3.54, 1hr-108. 41 4. Simulator(Picker Ther-X) : 2,017(9), 0.51(1.3), 0.24, 1hr-2, 7 5. RTP(Capentec Cap-plan) : 528(2), 0.4(0.93), - hrs, - The conclusion obtained from statistical analysis above are as follows. 1. The rate of operation of Cobalt unit($99.6\%$) was higher that of Linear Accelerators ($87.3\%$). The rates operation of Simulator and RTP computer were very close to that of Cobalt unit. 2. In order to raise up the working ratio of accelerator. it is desirable that we keep our engineer to learn a sufficient technical skill and the equipment agent to stock sufficient spare parts. 3. In order to maintain Linear Accelerator efficiently, it is desirable to have annually $2.3\%$ of the purchase price of equiment for repairing.

• 한국건설순환자원학회논문집
• /
• 제5권3호
• /
• pp.239-246
• /
• 2017

콘크리트 구조물은 목표내구수명동안 초기의 시공에 따른 내구수명과 보수를 통한 내구수명 확보를 통하여 성능을 유지한다. 결정론적인 방법에서는 내구한계에 이르면 보수횟수에 따라서 경비 및 탄소량이 계단식으로 증가하지만, 확률론적인 방법을 이용할 경우, 보수 경비와 탄소량을 연속적으로 도출할 수 있으며, $CO_2$의 흡착을 고려할 경우, 더욱 탄소량을 감축시킬 수 있다. 본 연구에서는 탄산화에 노출된 지하구조물에 대하여 결정론 및 확률론적인 방법을 배경으로 보수시기와 사용기간에 따른 흡착/발생 $CO_2$량을 평가하였다. 탄산화 깊이에 따른 $CO_2$흡착을 고려한 해석은 초기시공 및 보수재의 내구수명의 증가에 따라 탄소저감에 매우 효과적임을 나타내었다. 또한 초기 시공재료 및 보수재의 내구수명 변동성을 정의할 수 있다면, 확률론적 기법에서는 보수횟수를 감소시킬 수 있으므로 경비 및 $CO_2$저감에 효과적인 기법이 될 수 있다.

• Journal of Biosystems Engineering
• /
• 제4권1호
• /
• pp.67-74
• /
• 1979

This survey was carried out to grasp the actual condition of a power tiller utilization . Now, the power tiller has become the leading machinery in the field of agriculture throughout the country . Two hundred farm houses, located in the provincial districts of Kimcheon and kum0rung, hav etaken part in the survey from October 1, 1976 to September 30, 1977. The results are summarized as follows . 1. The average size of cultivated land of a farm household in the districts surveyed was 1.77ha which was bigger than that of whole country. And the average age of power tiller drivers was analyzed in which only 105 of total drivers was on their 30's. 2. Distribution of a power tiller utilization was appeared to be 34.4% for transporting , 24% for tilling , 23% for pumping , 11.5% for threshing and 6.6% for spraying. 3. Frequency of a power tiller utilization was high during the month of June, July and October while it was low during February and December . 4. Distribution of repairing cost was 8.5% for trailer, 7.1% for throttle lever and 6.7% for casket, respectively. The annual cost for repairing was 5,290 won.5. The annual cost for using a power tiller was composed of 51.5% of fixed cost and 48.5% of operating cost. 6. Economic analysis showed that it was not economically practical for individual ownership of a power tiller on the farm surveyed. Therefore, custom operation and joint ownership by a few farmers were recommended.