• Journal of Chest Surgery
• /
• 제37권4호
• /
• pp.307-312
• /
• 2004

With the development of cardiac surgical technique, we need more prosthetic materials for repairing the intra- and extracardiac defects. Although bovine pericardial bioprosthesis treated with glutaraldehyde (GA) solution is one of the most popular materials, it has a drawback of later calcific degeneration. The purpose of this study is to investigate the effectiveness of several materials and methods in reducing the calcific degeneration of bovine pericardium. Material and Method: Forty square-shaped pieces of bovine pericardia were fixed in 0.625% GA solution with 4 g/L MgCl$_2$ㆍ6$H_2O$ as a control group (group 1). Other 40 pieces pre-treated with 1 % SDS(group 2) and 40 pieces post-treated with 8% glutamate (group 3) and 2% chitosan (group 4) were also fixed in the same GA solution. Other 40 pieces pre-treated with 1% SDS and post-treated with 8% glutamate and 40 pieces post-treated with 2% chitosan were also fixed in the same GA solution (group 5, 6). The pericardial pieces were implanted into the belly of 40 Fisher 344 rats subdermally and were extracted 1 month, 2 months, 3 months, and 6 months after the implantation. With an atomic absorption spectrophotometry, we measured the calcium amount deposited and examined the tissue with microscope. Result: The calcium deposition in 1 month was less in group 2, 5, 6 than that in group 1 (p＜0.05). It was most prominent in group 5 (p＜0.01). This finding continued in 2 month. In 3 month, the calcium deposition was less in group 3 and 4 as well as group 2, 5, and 6 than in group 1. In 6 month, the calcium deposition in group 2, 3, 4, 5, and 6 was less than that in group 1 and the difference was more than that of 1, 2, and 6 month. The microscopic calcium deposition was also less in group 2 and 5. Calcium deposition developed in the whole layer of pericardium, beginning with the surrounding the collagen fiber and progressing inwardly. Conclusion: Pre-treatment with SDS, post-treatment with glutamate or chitosan, and SDS pre-treatment and post-treatment with glutamate or chitosan were effective in reducing the calcium deposition in bovine pericardium. Moreover, the combined method of SDS pre-treatment and glutamate post-treatment was more effective than other methods.

• Journal of Life Science
• /
• 제23권10호
• /
• pp.1183-1191
• /
• 2013

Human apurinic/apyrimidinic endonuclease (APEX-1) is a multifunctional protein that is capable of repairing abasic sites and single-strand breaks in damaged DNA. In addition, it serves as a redox-modifying factor for a number of transcription factors. Identifying the transcriptional targets of APEX-1 is essential for understanding how it affects various cellular outcomes. Expression array analysis was used to identify glial cell-derived neurotropic factor receptor ${\alpha}1$ ($GFR{\alpha}1$), which is an encoding receptor for the glial cell-derived neurotropic factor (GDNF) family, the expression of which is induced by APEX-1. A target of GDNF/$GFR{\alpha}$ signaling, c-Src (Tyr418) was strongly phosphorylated by GNDF in the APEX-1 expressing cells. Moreover, GDNF initiated cell proliferation, measured by counting the number of cells, in the APEX-1 expressing cells. Importantly, the down-regulation of APEX-1 by siRNA caused a marked reduction in the $GFR{\alpha}1$ expression level, and it reduced the ability of GDNF to phosphorylate c-Src (Tyr418) and stimulate cell proliferation. These results demonstrate an association between APEX-1 and GDNF/$GFR{\alpha}$ signaling and suggest a potential molecular mechanism for the involvement of APEX-1 in cell survival and proliferation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제27권4호
• /
• pp.62-69
• /
• 2023

This study investigated the electromechanical properties of cement based smart repair materials (SRMs) according to the different amounts of fine steel slag aggregates (FSSAs). SRMs can self-diagnose the quality of repairing and self-sense the damage of repaired zone. The replacement ratios of FSSAs to sand for SRMs were 0% (FSSA00), 25% (FSSA25), and 50% (FSSA50) by sand weight. The electrical resistivity of SRMs generally decreased as the compressive stress of SRMs increased: the electrical resistivity of FSSA25 at the age of 7 hours decreased from 78.16 to 63.68 kΩ-cm as the compressive stress increased from 0 to 22.37 MPa. As the replacement ratio of FSSAs by weight of sand increased from 0% to 25%, the stress sensitivity coefficient (SSC) of SRM at the age of 7 h increased from 0.471 to 0.828 %/MPa owing to the increased number of partially conductive paths in the SRMs. However, as the replacement ratio of FSSAs further increased up to 50%, the SSC decreased from 0.828 to 0.649 %/MPa because some of the partially conductive paths changed to continued conductive ones. SRMs are expected to self-sense the quality and future damage of repaired zone only by measuring the electrical resistivity of the repaired zone in addition to fast recovery in the mechanical resistance of structures.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권3호
• /
• pp.216-221
• /
• 2009

Purpose: The retention of the basement membrane complex, which was the unique feature of the acellular dermal matrix ($AlloDerm^{(R)}$), plays an important role in the normal process of wound healing. The present study was aimed to compare the healing of the acellular dermal matrix according to the graft method in the rabbit ear. Materials and methods: Six mature rabbits weighing about 3.0 kg were used, $10\;{\times}\;5\;mm$ sized subcutaneous pockets were created between the ear skin and the underlying perichondrium. In the control group, the acellular dermal matrix was grafted with the basement membrane facing toward the perichondrium. On the contrary, the acellular dermal matrix was grafted with the basement membrane facing toward the skin side in the experimental group I. In the experimental group II, the acellular dermal matrix was grafted like rolled configuration with basement membrane side in. The grafted site was picked at 3, 7, and 21 days after the graft. Serial sections were processed by H-E stain and examined under light microscopy to assess the healing patterns. Results: There was no distinct volume loss in the gross examination, but resorption was observed from the edge of the acellular dermal matrix in the histological examination. The space of resorption was replaced by the newly formed fibrous tissues and vessels. The inflammatory cells were more increased at 7 days after the graft than the early days. However, inflammation was decreased at 21 days after the graft. Regardless of the graft direction, no differences were observed between the control and the experimental group I in the healing patterns. Conclusion: These results suggest that the acellular dermal matrix can be used simply and effectively without regard to the graft direction as a substitute of autogenous material for repairing soft tissue defect.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.573-576
• /
• 2008

Recently, it is the well-known that there are some kinds of problem the waste concrete generated while repairing, reinforcing and dismantling of structures in the domestic and overseas. In this paper, various tests were performed about the use of the recycled concrete fine aggregate for the materials of high quality and structural concrete. And also, in order to improve structural performance of the concrete structure the steel frame was under overcrowded arrangement of steel bar. Consequently, it was be necessary the Self-Consolidating Concrete(SCC) that can fill the concrete into the work-form corner which has become overcrowded arrangement of steel bar without any other vibration. The purpose of this study is related to the properties of Self-Consolidating Concrete(SCC) according to mixing ratio of recycled concrete fine aggregate.

• Journal of architectural history
• /
• 제17권4호
• /
• pp.43-64
• /
• 2008

Kyeongbokgung succeeded in regaining its status as a royal palace after the reconstruction that began in the second year of King Gojong(1865) only to have most of its buildings taken down in the early 20th century. Fortunately, however, there is the Pukkwoldohyong(Map of North Palace), which drew out each of the buildings of Kyeongbokgung and their arrangement in details in 1907 when the royal palace lost its original appearance. And there is another plot plan of the royal palace at the Korea University Museum, which labeled it Kyeongbokgung-Baechido(Planning Map of Kyeongbokgung Palace). The map presents almost the same plan as Pukkwoldohyong in terms of making and expressive methods, being estimated to have been made in 1888 since its building arrangement doesn't show the changes made after 1890. The map also offers more information about the uses of each building than Pukkwoldohyong and matches the excavation results of the relics. Kyeongbokgung-Jeondo(Map of Kyeongbokgung Palace), which is recorded to be made during the reconstruction of the palace in the early years of King Gojong in historical materials, describes the shapes and arrangements of the buildings in a concrete and realistic fashion. The Kyeongbokgung-Baechido seems to be one of the plans made in the process of restoring and repairing buildings that were lost or destroyed in fire. The Kyeongbokgung-Baschido has the following historic values; 1) it provides dues to estimate the early state of the palace after the reconstruction during the reign of King Gojong. In fact the Sujeongjeon and Heungbokjeon show the early state of the reconstruction; 2) it contains data with which to understand the changes to the palace after 1890, around which they added Hamhwadang and Jibokjae; and 3) it offers information about the uses of the palace's buildings from 1885 to 1880 with its descriptions of the building purposes and relationships regarding the life in the palace.

• The Journal of Advanced Prosthodontics
• /
• 제3권3호
• /
• pp.166-171
• /
• 2011

PURPOSE. The purpose of this study is to evaluate and compare the shear bond strength of the gingiva-colored composite resin and the tooth-colored composite resin to porcelain, metal and zirconia. MATERIALS AND METHODS. Sixty cylindrical specimens were fabricated and divided into the following 6 groups (Group 1-W: tooth-colored composite bonded to porcelain, Group 1-P: gingiva-colored composite bonded to porcelain, Group 2-W: tooth-colored composite bonded to base metal, Group 2-P: gingiva-colored composite bonded to base metal, Group 3-W: tooth-colored composite bonded to zirconia, Group 3-P: gingiva-colored composite bonded to zirconia). The shear bond strength was measured with a universal testing machine after thermocycling and the failure mode was noted. All data were analyzed using the two-way analysis of variance test and the Bonferroni post-hoc test at a significance level of 0.05. RESULTS. The mean shear bond strength values in MPa were 12.39, 13.42, 8.78, 7.98, 4.64 and 3.74 for Group 1-W, 1-P, 2-W, 2-P, 3-W and 3-P, respectively. The difference between the two kinds of composite resin was not significant. The shear bond strength of Group 1 was the highest and that of Group 3 was the lowest. The differences among Group 1, 2 and 3 were all significant (P<.05). CONCLUSION. The shear bond strength of the gingiva-colored composite was not less than that of the tooth-colored composite. Thus, repairing or fabricating ceramic restorations using the gingiva-colored composite resin can be regarded as a practical method. Especially, the prognosis would be fine when applied on porcelain surfaces.

• The Journal of Advanced Prosthodontics
• /
• 제12권5호
• /
• pp.322-328
• /
• 2020

PURPOSE. This study evaluated the shear bond strength between 3D printed provisional resin and conventional provisional resin depending on type of conventional provisional resin and different surface treatments of 3D printed resin. MATERIALS AND METHODS. Ninety-six disc-shaped specimens (Ø14 mm × 20 mm thickness) were printed with resin for 3D printing (Nextdent C&B, Vertex-Dental B. V., Soesterberg, Netherlands). After post-processing, the specimens were randomly divided into 8 groups (n=12) according to two types of conventional repair resin (methylmethacrylate and bis-acryl composite) and four different surface treatments: no additional treatment, air abrasion, soaking in methylmethacrylate (MMA) monomer, and soaking in MMA monomer after air abrasion. After surface treatment, each repair resin was bonded in cylindrical shape using a silicone mold. Specimens were stored in 37℃ distilled water for 24 hours. The shear bond strength was measured using a universal testing machine at a crosshead speed of 0.5 mm/min. Failure modes were analyzed by scanning electron microscope. Statistical analysis was done using one-way ANOVA test and Kruskal-Wallis test (α=.05). RESULTS. The group repaired with bis-acryl composite without additional surface treatment showed the highest mean shear bond strength. It was significantly higher than all four groups repaired with methylmethacrylate (P<.05). Additional surface treatments, neither mechanical nor chemical, increased the shear bond strength within methylmethacrylate groups and bis-acryl composite groups (P>.05). Failure mode analysis showed that cohesive failure was most frequent in both methylmethacrylate and bis-acryl composite groups. CONCLUSION. Our results suggest that when repairing 3D printed provisional restoration with conventional provisional resin, repair with bis-acryl composite without additional surface treatment is recommended.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.654-658
• /
• 2006

To solve some problems that reveals in the exiting stickiness problem of the housetop, the housetop finishing impact layer can be displaced by the existing concrete block. By doing in this way, this need is rising that the excess cost should be reduced and the materials should be recycled in repairing. According to the above, this study is going to suggest the basic data on building and using of the dry process method by estimating and analyzing a overall determinate quantity through the experiment on the insulation performance among the capacity items on the outside insulation waterproof dry process suggested. In addition, choosing the building method according to the use, the peculiar property and the importance of the building can be possible by analyzing the defect causes happening in the rooftop insulation and waterproof, suggesting the better method and classifying the most proper choosing methods for the need of the building according to the importance of the main factors.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제22권3호
• /
• pp.84-89
• /
• 2018

Recently, study on self-healing materials have been performed to increase the life by repairing the damage of structures themselves, which are difficult to repair or require high maintenance costs. A water permeability test has been widely used for the evaluation of self-healing performance. However, in the self-healing performance test method, the initial crack width of the concrete greatly affects on the self-healing performance but it does not have a consistent standard. Therefore, in this study, the correlation between crack and permeability and that between time and permeability were analyzed based on crack width and permeability. In addition, since the initial crack width measured by optical microscope is not reliable, the value is derived from the Poiseuille flow and the tendency of time-permeability and time-crack width are analyzed.