• Steel and Composite Structures
• /
• 제20권4호
• /
• pp.951-962
• /
• 2016

The determination of the stress intensity factor at the crack tip is one of the most widely used methods to predict the fatigue life of aircraft structures. This prediction is more complicated for repaired cracks with bonded composite patch. This study is used to compute the stress intensity factor (SIF) and crack opening displacement (COD) for cracks repaired with single and double-sided composite patches. The effect of the presence of disbond region in adhesive at the crack was taken into consideration. The results show that there is a considerable reduction in the asymptotic value of the stress-intensity factors and the crack opening displacement at the crack tip. The use of a double-sided patch suppresses the bending effect due to the eccentricity of the patch on one side only.

• 한국안전학회지
• /
• 제38권3호
• /
• pp.20-26
• /
• 2023

Fiber-reinforced composite materials with carbon, glass, and aramid fibers are widely applied to industrial field structures due to their excellent properties. However, carbon fibers are vulnerable to external impacts, whereas aramid fibers degrade when exposed to water. This study evaluated carbon/aramid fiber composites degraded and damaged by high-temperature saline environments using acoustic emission (AE). The test specimen was molded using an autoclave and immersed in seawater at 70 ℃ for 224 days. In order to imitate the damage, a 3-mm-diameter hole was drilled using a diamond drill. Additionally, the specimen with the perforation was repaired by patch attachment processing. Three-point bending was used to conduct the flexural experiment, and an AE sensor with a 150-kHz resonance frequency was attached to evaluate the damage and the effect of patch attachment. AE accumulative counts obtained at the maximum load were 69.2, 67.1, and 91.2 for a high-temperature seawater deteriorated condition, a hole specimen, and a repaired patch specimen, respectively. Furthermore, the maximum amplitude of AE was detected at low values of 28 dB, 31.3 dB, and 30.3 dB.

• 콘크리트학회논문집
• /
• 제20권4호
• /
• pp.423-430
• /
• 2008

최근 들어 고속도로를 중심으로 하여 교량상판 보수재료로 초속경 라텍스개질콘크리트 (Very-Early Strength Latex-Modified Concrete : 이하 VES-LMC)가 개발되어 이용되고 있고, 그 활용 빈도가 커지고 있다. 이는 VES-LMC의 특징상 보수 후 3시간 만에 교통개방이 가능하며, 라텍스 첨가로 기존의 보수재료가 갖는 장기 내구성의 문제를 해결하였기 때문이다. 그러나 위와 같은 장점으로 보수 보강 재료로 사용되고 있는 VES-LMC에 대한 구조적인 연구에 대해서는 미비한 상태이다. 본 연구에서는 VES-LMC를 기존보의 덧씌우기 형태와 열화된 콘크리트의 보수 형태로 나누어 시험체를 제작하고, 4점 휨 실험을 수행하여 휨 거동 및 신 구 콘크리트의 부착 특성과 균열 진전 양상, 보수 보강효과를 확인하고자 하였다. 그 결과 보수 보강두께가 증가함에 따라 보수 보강효과가 증가하는 경향을 보였으며 이는 강성이 증가하여 휨에 대한 저항 능력이 증대되는 것을 확인하였다. 보수 시험체의 경우 철근의 피복두께 이상으로 보수 되었을 경우 강성이 최대 40% 이상 증가 되는 결과는 얻을 수 있었으나 80 mm와 120 mm의 경우 그 값이 비슷한 양상을 보여 보강 두께 선정 시 고려되어야 할 요소라 판단된다. 계면거동을 확인한 결과 보수 및 보강 시험체 모두 계면에서의 상대 변위량이 감소되는 것을 확인하였으며, 두 재료가 비교적 일체로 거동하는 것을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.455-460
• /
• 2002

In this study, a numerical analysis that can effectively predict the effect of strengthening of cracked flexural members is developed using axial deformation link elements. Concrete and interface between concrete and repair material are considered as quasi-brittle material. Reinforcing bars and reinforcing steel plates are assumed to perform as elasto-plastic materials. Unloading behavior of axial deformation link element is implemented. In the developed numerical model, a flexural member is intentionally cracked by pre-loading, then, the cracked member is repaired using extra elements, and reloaded. The results from analysis of repaired flexural members agrees well with available experiment results. Also, it was shown that the effect of strengthening and the change of failure mode with respect to the time for strengthening and thickness of repair materials. Based on the results, it was determined that the developed numerical model has a good agreement for determining failure modes and effect of strengthening in cracked flexural members. By utilizing the developed numerical analysis, the time and dimension of external strengthening in an existing cracked flexural member with predition of failure mechanism can be determined.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권2호
• /
• pp.89-96
• /
• 2010

이산화탄소에 의해 열화된 콘크리트 구조물의 보수 후 잔존수명을 평가할 때 보수재의 효과를 고려하기 위해 본 연구에서는 탄산화에 의해 열화를 받은 콘크리트 부재의 보수 후 재열화과정을 Fick's 확산(diffusion) 제1법칙을 이용하여 모델링함으로써 단면복구재에 의해 보수된 콘크리트 부재의 독특한 상황을 고려한 합리적인 예측식을 제시하였다. 연구결과는 보수재의 이산화탄소 확산 프로파일과 기존 구체콘크리트의 탄산화된 부분의 이산화탄소 확산 프로파일을 효과적으로 모델링할 수 있음을 보여줬다. 제시된 평가모델식에 대한 검증예제를 통해 보수재의 이산화탄소 확산지연효과를 확인할 수 있었으며 보수된 콘크리트 구조물의 보수 후 잔존수명을 객관적이고 수치계산적인 방법으로 평가할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.94-97
• /
• 2008

In the welding process, weldments usually include repair weld during the manufacturing process. Repair welds is supposed to cause strong tensile residual stress. Moreover weldments, usually made by Alloy 82/182, is susceptible to PWSCC. Therefore, mitigation of welding residual stress in weldments is important for reliable operating. PWOL is one of the methods for mitigation and verified for over twenty years. In this paper, residual stress distribution of repaired weldments and the effect of PWOL on mitigation is examined for surge nozzle.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.259-262
• /
• 2005

Numerous studies showed that safety and serviceability of many concrete infrastructures and buildings built in 1970's have capacity less than their design capacities and thereby require immediate retrofitting. Currently, these aged concrete structure are being repaired using many repair and strengthening methods developed in the past. Therefore, in this study, a repairing and strengthening method for retrofitting high strength concrete columns that can effectively improve the performance of high strength concrete columns is developed. The square high strength concrete column's cross-sectional shape is modified to octagonal shape by attaching precast members on the surface of the column. Then, the octagonal column surface is wrapped using Carbon Fiber Sheets (CFS). The method allowed the maximum usage of confinement effect of externally wrapped CFS, which resulted in improved strength and ductility of repaired high strength concrete columns.

• 대한치과기공학회지
• /
• 제12권1호
• /
• pp.121-124
• /
• 1990

The purpose of this study was to evaluate the effect of three different retention forms on the bond strength when complete denture repaired. Total 75 samples were divided into 3 groups(Dove-tail form, bevel form, rabbit form). The completed resin samples were compressed in Instron Testing Machine until gross fracture occurred to examine the effect on the bond strength of resin base. The results of the experiment were as follows : 1. The difference of bond strength according to three retention forms were not statistically significant(P>0.05). 2. Dove-tail form was strongest to bond strength among the three retention forms.

• 콘크리트학회논문집
• /
• 제17권2호
• /
• pp.171-177
• /
• 2005

철근콘크리트 구조물은 시간이 경과함에 따라 외력의 증가나 환경의 변화 등에 의하여 노후화되고 그 기능을 상실하게 된다. 이러한 구조물의 기능을 회복하기 위하여 보수$\cdot$보강 공법이 적용되고 있다. 본 연구에서는 이러한 보수$\cdot$보강 공법 중프리스트레싱 공법과 단면증설 공법의 특성을 도입한 강연선과 폴리머 모르타르에 의한 보수$\cdot$보강 공법이 적용된 슬래브의 휨 거동특성을 통해 기존 구조물의 보수$\cdot$보강 효과를 파악하였다. 실험은 강연선의 직경, 모르타르의 종류, 치핑 여부, 모르타르 두께, 강연선의 간격 등의 실험변수에 따라 1방향 슬래브 10개, 2방향 슬래브 4개의 시험체를 제작하여 수행하였다. 실험결과 강연선의 간격이 감소할수록 보강효과가 증가하였고, 치핑을 한 경우 콘크리트와 모르타르의 계면에서의 균열이 극한하중 이후에서 발생하였다.

• 대한치과보철학회지
• /
• 제34권4호
• /
• pp.665-674
• /
• 1996

This study was designed to evaluate the effect of processing method and surface design on the transverse strength of repaired denture base resin. Three heat-cured denture base resins(Vertex, Lucitone, Lang), one cold-cured resin(Lang), and one light-cured resin(Dentacolor gingiva material) were used for repair purpose. The specimens for 3-point flexure test were fabricated by five processing methods such as self-curing, pressure pot, boiling water, processing, and light curing. Finally to evaluate the effect of surface designs for repaired resin, three surface designs(butt, bevel, inverse bevel) were tested. Within the limit of this study, following conclusions were drawn. 1. Lucitone denture base material showed highest flexural strength of $131.37{\pm}2.15MPa$, and there were significant differences in stength between Lucitone and other resins. 2. Between two different self curing methods, self curing repair resin, Lang, cured by pressure pot method showed highest flexural strength, $58.49{\pm}4.89MPa$. 3. Among the heat cured repair resins, maximum transverse strength value of $88.69{\pm}16.60MPa$ was recorded in Lucitone group cured by processing method. 4. Inverse bevel joint design showed significantly higher bond strength than butt joint group, Maximum bond strength was $59.36{\pm}1.33MPa$ in inverse bevel joint design group.