• Computers and Concrete
• /
• 제30권6호
• /
• pp.409-419
• /
• 2022

The purpose of this study is to examine the effectiveness of biological repairing mortars on restoring the structural performance of a sewage culvert deteriorated by sulfate attack. The biological mortars were developed for protecting concrete structures exposed to sulfate attack based on the block membrane action of the bacterial glycocalyx. The diffusion coefficient of sulfate ions in the biological mortars was determined from the natural diffusion cell tests. The effect of sulfate-attack-induced concrete deterioration on the structural performance of culverts was examined by using the moment-curvature relationship predicted based on the nonlinear section lamina approach considering the sulfuric-acid-induced degradation of the structure. Typical analytical assessments showed that biological mortars were quite effective in increasing the sulfate-resistant service life of sewage culverts.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.687-688
• /
• 2015

The objective of identifying the cause of inconsistency in determining priority of educational facility maintenance, any related factors were thoroughly identified and tested, to see if it has any effect on decision-making process in resource allocation for educational facilities. On the assumption that 'the more there are to be repaired/maintained and deferred, the higher the relevant cost will be, this will lead to a significant social loss. Accordingly, this study established a framework of determining resource allocation priority based on deferred maintenance and its related expenses. For doing so, it was required to determine relative ranking in terms of resource allocation within a pre-assigned school district, in consideration of the criticality of each deferred maintenance attribute/variable.

• Advances in aircraft and spacecraft science
• /
• 제10권4호
• /
• pp.335-346
• /
• 2023

In this study, The Von Mises stresses in composite plate loaded in tension and repaired by a boron/epoxy scarf patch were analyzed using the finite element method. The performance of the repairs depends on several parameters: the dimensions and the intrinsic properties of the patch and the adhesive which are dependent on each other. Therefore, the method of experiment designs is used to determine the interaction effect of different parameters (patch folds), their optimum and the most influential parameter. The optimum of stacking sequences allows reducing stresses significantly, and thus permits designers to improve the quality of repairs.

• Archives of Plastic Surgery
• /
• 제51권1호
• /
• pp.27-29
• /
• 2024

Facial massages are frequently performed to achieve a feeling of freshness, rejuvenation, skin tightening, and delayed onset of wrinkles. However, vigorous massages can induce unexpected symptoms. Here, we present a case of a woman who complained of an asymmetric facial appearance and a mass-like lesion following a long-term facial massage intervention. A facelift incision was performed. Platysma muscle rupture was observed intraoperatively, which was then repaired. To our knowledge, this is the first report of a vigorous facial massage-induced ipsilateral platysma rupture.

• 한국위성정보통신학회논문지
• /
• 제9권1호
• /
• pp.45-50
• /
• 2014

본 논문에서는 한 도시(원주시)를 대상으로 안정적이면서 높은 경제 절감 효과를 얻을 수 있는 광대역 무선 Smart-city형 네트워크 커버리지를 제안하고자 한다. 이를 위하여 해당 지역에 대한 사전 지리적 조사를 실시하고 환경에 적합한 장비를 선택하여 네트워크망의 추가 및 복구가 쉬운 무선 메쉬 네트워크망을 설계하였고 시뮬레이션을 통해 기존에 구축되어 있는 네트워크망과 그 성능을 비교, 평가하고 고찰하였다. 본 논문이 추구하는 목표는 연구를 통해 무선 메쉬 네트워크의 경비 절감 효과 및 우수한 성능을 평가받고 이를 활용하여 그린 IT의 기초가 될 수 있는 미래지향적 도심 통합 네트워크를 제안하는데 있다.

• Earthquakes and Structures
• /
• 제14권5호
• /
• pp.379-388
• /
• 2018

This study aims to identify the effect of both longitudinal reinforcement details and damage level on making a decision of repairing pre-damaged bridge columns using basalt fiber reinforced polymer (BFRP) jackets. Two RC bridge columns with improper details of the longitudinal and/or transverse reinforcement were tested under the effect of a constant axial load and increasing lateral cyclic loading. Test results showed that the lap-splice column exhibited an inferior performance where it showed rapid degradation of strength before achieving the theoretical strength and its deformation capacity was limited; however, quick restoration is possible through a suitable rehabilitation technique. On the other hand, expensive repair or even complete replacement could be the decision for the column with the confinement failure mode. After that, a rehabilitation technique using external BFRP jacket was adopted. Performance-based design details guaranteeing the enhancement in the inelastic performance of both damaged columns were addressed and defined. Test results of the repaired columns confirmed that both reparability and the required repairing time of damage structures are dependent on the reinforcement details at the plastic hinge zone. Furthermore, lap-splice of longitudinal reinforcement could be applied as a key design-tool controlling reparability and restorability of RC structures after massive actions.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권2호
• /
• pp.55-60
• /
• 2000

A comparison of Riveted and bonded repairs, bearing and net tension failures, and Al 6061-T6 plates is presented. The results are then compared with previous papers about bonded repairs on different patch materials and shapes. Aluminum alloys, including Al 6061-T6, have a face-centered-cubic crystal structure. Under normal circumstances, these types of crystal structures do not exhibit cleavage fractures even at very low temperatures. In aluminum-base structures, the cracked plate structures are frequently repaired using mechanical fasteners-either rivets of bolts- even though patch-bonding techniques are applied to repair and reinforce the structure. Static test results indicate that the riveted repairs are affected by the position of the rivers. When using the same size of patch, the bonded repair technique is stronger; the rate of elongation is also increased. Form FEM analysis, it is revealed the origin of patch debonding in patch-bonded structures is the edge of the patch along to the tensile strength.

• 대한한의학회지
• /
• 제17권2호
• /
• pp.133-144
• /
• 1996

This study investigated the effect of InJinORyungSan on the nephrotoxicity in rat treated with cyclosporin A. Control group were injected with cyclosporin A alone. whereas test group were injected with cyclosporin A and InJinORyungSan extract. In the control group, blood urea nitrogen(BUN), serum creatinine(S-Cr) and renal lipid peroxidation(LPO) level were significantly increased, but renal superoxide dismutase(SOD) activity was significantly decreased. In the kidney of control group, the destruction of distal convoluted tubules(DCT) and proximal convoluted tubules(PCT) were observed in renal cortex, lymphocytes and fibroblast were appeared in the portion of DCT destruction. However, in the test group, BUN, S-Cr and renal LPO level were significantly decreased as compared with control group, on the other hand, renal SOD activity was significantly increased. In the kidney of test group, the destruction of DCT and PCT were repaired as compared with control group. These results demonstrated that InJinORyungSan. can be attributed to recovery from nephrotoxicity, We consider that activated SOD by InJinORyungSan suppress renal LPO or production of free radicals induced by cyclosporin A.

• Structural Engineering and Mechanics
• /
• 제57권2호
• /
• pp.295-313
• /
• 2016

In this study, the three-dimensional finite element method is used to determine the stress intensity factor in Mode I and Mixed mode of a centered crack in an aluminum specimen repaired by a composite patch using contour integral. Various mesh densities were used to achieve convergence of the results. The effect of adhesive joint thickness, patch thickness, patch-specimen interface and layer sequence on the SIF was highlighted. The results obtained show that the patch-specimen contact surface is the best indicator of the deceleration of crack propagation, and hence of SIF reduction. Thus, the reduction in rigidity of the patch especially at adhesive layer-patch interface, allows the lowering of shear and normal stresses in the adhesive joint. The choice of the orientation of the adhesive layer-patch contact is important in the evolution of the shear and peel stresses. The patch will be more beneficial and effective while using the cross-layer on the contact surface.

• 한국전산구조공학회논문집
• /
• 제22권6호
• /
• pp.557-564
• /
• 2009

용접과정 중 발생되는 인장잔류응력은 원전 배관 이종용접부의 PWSCC가 발생되는 원인 중 하나라고 알려져 있다. 일반적으로 보수용접은 용접과정 중 흔히 일어나는 현상이다. 보수용접은 강한 인장잔류응력을 유도하기 때문에 이종용접부의 PWSCC를 유도하기 쉽다. 본 논문에서는 강한 인장잔류응력이 발생되는 보수용접부에 대해 보수용접 깊이에 따라 동종용접과 예방용접 overlay로 인하여 인장잔류응력의 크기가 변화하는 것을 정량적으로 확인하였다.