• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.32-33
• /
• 2015

As the importance of maintenance of reinforced concrete structure recently has emerged, the attention of durability of structure has been increasing. There are many studies about durability decline especially due to the carbonation. In order to study carbonation progress after surface repair of carbonated concrete, each carbonation penetration velocity from different repair materials of concrete structure is compared through the experiment of carbonation accelerating CO₂ concentration to 100%. As carbonation infiltration progress is predicted through this study, the counterplan of service life evaluation will be prepared on selection of repair materials of concrete structure.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.15-16
• /
• 2014

As the importance of maintenance of reinforced concrete structure recently has emerged, the attention of durability of structure has been increasing. There are many studies about durability decline especially due to the carbonation. In order to study carbonation progress after surface repair of carbonated concrete, each carbonation penetration velocity from different repair materials of concrete structure is compared through the experiment of carbonation accelerating CO2 concentration to 100%. As carbonation infiltration progress is predicted through this study, the counterplan of service life evaluation will be prepared on selection of repair materials of concrete structure.

• Computers and Concrete
• /
• v.16 no.4
• /
• pp.531-544
• /
• 2015

The objective of this study was to examine the effect of repair mortar on the dynamic properties such as natural frequencies, mode shape and damping ratios of two story single span scale reinforced concrete building. To this end, two story single span scale reinforced concrete building having dimensions of 150 cm (width), 150 cm (length) and 135 cm (height) was constructed. Workmanship defects such as separation of material, faulty vibration application and bad gradation of the structure were properly evaluated. Dynamic properties of damaged structure were experimentally determined using Operational Modal Analysis (OMA). Detected defects in the structure were fixed by plastering with repair mortar. Dynamic properties of repaired structure were reevaluated by using the OMA method. Finite element software called Abaqus was used to numerically determine dynamic properties of the structure. Structure modeled as solid was subjected to Linear Perturbation Frequency Method. The changes in dynamic properties of structure after the repair process were comparatively studied by evaluating experimental and numerical results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.652-655
• /
• 2004

In these days, repair materials for leakage cannot help but being taken in temporary way without any noticeable countermeasure. This kind of repair is socially criticized many times that is defective construction even if tills costs a lot. It was not arrange the standard for performance evaluation test method and quality maintenance for materials, even it has been used various injection repairing agent. In conclusion, We suggest that the test method for repair materials for leakage to establish the leakage repairing technology as increase of structure demand, so that the necessity of the establishment of the quality control standard and the performance testing way on the relevant water-proof seal is increasing a lot to regulate the water-proof technology and the leakage repair technology.

• Journal of the Korean Society of Safety
• /
• v.25 no.1
• /
• pp.65-71
• /
• 2010

In this study, a series of finite element analysis using LUSAS were performed in order to assess the quantitative effects of repair and retrofit of stringer in steel plate girder railway bridge with fatigue cracks. And cutoff types of end part of upper flange were considered as right-angled type and round-angled type. Also, as a method of repair and retrofit of fatigue cracks in stringer, perforation of stop-hole and installation of bracket were considered. From the analysis result, it was possible to assess the fatigue safety and fatigue life of stringer with fatigue cracks, and to estimate the stress intensity factor range in cut-off part of stringer using J-integral method. Also, according to the method of perforation of stop-hole and installation of bracket, it was possible to calculate the crack propagation life at the cut-off part of stringer.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.2
• /
• pp.50-60
• /
• 1997

Reconfiguration of a memory array using spare rows and columns has been known to be a useful technique to improve the yield. When the numbers of spare rows and scolumns are limited, respectively, the repair problem is known to be NP-complete. In this paper, we propose the reconfiguration algorithm for an array of memory cells using faulty cel clustering, which removes rows and columns algrithm is the simplest reconfiguration method with the time complexity of $O(n^2)$, where n is the number of faulty cells, however the repair rate is very low. Whereas the exhaustive search algorithm has a high repair rate, but the time complexity is $O(2^n)$. The proposed algorithm provides the same repair rate as the exhaustive search algorithm for almost all cases and runs as fast as the greedy method. It has the time complexity of $O(n^3)$ in the worst case. We show that the propsed algorithm provides more efficient solutions than other algorithms using simulations.

• Journal of the Korean Society for Railway
• /
• v.10 no.3 s.40
• /
• pp.306-312
• /
• 2007

This paper presents the optimal design method of the train repair facility based on the simulation analysis. The train is divided into the power car, motorized car and passenger car for the simulation process analysis and train repair facility is composed of each subsystems such as a blast, dry and wash workshop. In simulation analysis, we consider the critical (dependent) factors and design (independent) factors for the optimal design. Therefore, a simulation optimization uses Evolution Strategy (ES) in order to find the optimal design factors. Experimental results indicate that simulation design factors are sufficient to satisfy the conditions of dependent variables. The proposed analysis method demonstrates that simulation design factors determined by the simulation optimization are appropriate for real design factors in a real situation and the accuracy and confidence for the simulation results are increased.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.212-218
• /
• 1995

This study experimentally evaluated the performance of damaged section which was repaired using polymer materials in reinforced flexural flexural members Six different materials, two types of polymer, two types of polymer-cement and two types of cement, were used by means of injection method on prepacked concrete and spray mortar patching method. As results, the repair works could be done easily and surfaces of the repaired section were smooth.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.1
• /
• pp.223-230
• /
• 2006

In this paper the method for repair LCC evaluation of reinforced concrete structures deteriorated by chloride attack was constructed. Also, the FEM analysis for chloride ion penetration into concrete was conducted to evaluate the repair LCC which was decided by the number of repair times including early stages of construction and repair construction during the service life of structures. As a result, the number of repair times is obtained from the comparing the concentration of the chloride ion in a rebar position, and the critical chloride ion concentration of rebar corrosion through the FEM analysis considering the kind of repair materials and methods. Also, the repair LCC could be calculated by the number of repair times during the service life of structures.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.19-24
• /
• 2014

This study, the exchange value of the car after the repair, which affects the valuation elements and repair characteristics factors were investigated. Based on this specific accident damaged condition of the car, repair range, repair methods, repair costs, market transactions, taking into account the vehicle's depreciation appraisal method is proposed.