• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.592-597
• /
• 1997

Many strengthening methods are introduced and used to rehabilitate existing structures. However, both theoretical background and application techniques are not. One of the most popular methods is bonded plate method using either steel plate or carbon plate. For bonded plate method, bonding at the end of the plate is the most important properties. In this study, a method to reduce the stress distribution at the end of the bonded plate is found and tested. The results showed that the proposed end anchoring method is effective.

• Journal of Chest Surgery
• /
• 제24권5호
• /
• pp.463-469
• /
• 1991

Post-anastomotic leakage and stenoses remain major complications and are still responsible for many mortalities after esophageal reconstructive procedures. If the hand-suture is used, anastomotic leaks developed frequently than stenoses. But post-anastomotic leakages are more critical than post-anastomotic stenoses. If the stapler is used, anastomotic stenoses will develop frequently and not critical than anastomotic leakages. The stapler suture method is easier and quicker than the hand suture method in the esophageal anastomotic procedures. But the disadvantages of the stapler suture method is that there is not reachable site with anastomotic stapler the thoracic inlet region and the cost is expensive. We have treated 44 cases of the surgical complications after esophageal reconstructive procedure with conservative and surgical treatment for 10 years from January, 1980 to December, 1989. The anastomotic site stenoses were 8 cases in the hand-suture methods and 4 cases in the stapler-suture methods. The anastomotic leaks were 8 cases in hand-suture methods and 5 cases in stapler-suture methods. There were one death in the surgical repair of four post-operative anastomotic stenoses and two deaths in the surgical repair of three post-operative anastomotic leakages. Ever though we consider that there is more anastomotic leakage than stenoses after the hand-suture methods in esophageal reconstructive procedures. the cost with long stay in the intensive care unit to treat anastomotic leakage after the hand-suture, would be more expensive than-the cost of the treatment of the anastomotic stenoses after auto-suture.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.541-546
• /
• 2000

Recently, there have been increased mush concerns about repair and rehabilitation works for aged concrete structures to keep up with rapid economic growth in Korea since the early 1970's. In particular, it is believed in these days that there are significantly increasing number of aged concrete bridge slabs, which are strongly needed to construct and rehabilitate by innovative construction method. The objective of this research is to develop the new construction method of concrete slab in bridge structure, which can contribute to minimize the traffic congestion during the repair and rehabilitation works of aged concrete slab, and can also sufficiently assure the quality through the minimization of in-situ works at the site. I-beams with punch holes, which are substituted instead of main reinforcing steels in concrete slabs, will be manufactured in accordance with the specification in the factory, and will be preassembled into the panel. After erecting the preassembled panels in the site, concrete will be poured into the slab panel. This test is to investigate physical properties of I-Beam with punch holes itself, and then to investigate structural properties of assembled I-Beam panels through static and fatigue test, of which can be utilized for the development of new construction method of concrete slab in bridge structure.

• 한국정밀공학회지
• /
• 제34권1호
• /
• pp.19-22
• /
• 2017

This paper describes the efficient equipment maintenance that can offer the exact time for repair and change of component in root industry. A conventional method offered the fixed time for repair and change of component because the method is based on early guarantee specification of the component. However the operating condition of manufacturing field is often under worse condition than early guarantee condition for high productivity. So, most components can't use until early guarantee time due to the operation of various different condition. Therefore we suggest the useful method for efficient equipment-maintenance by manufacturing-field analysis and feedback database. For this, the classification of root industry and related equipment is performed and then the detail classification of the process and component for equipment maintenance. And the monitoring module is also designed to gather data for feedback process and the environment is basically implemented for aging and reliability test.

• 대한두개안면성형외과학회지
• /
• 제19권1호
• /
• pp.79-82
• /
• 2018

Formation of an ideally-shaped tragus remains one of the most challenging issues during staged tragus reconstruction in microtia patients. The authors describe a new method used to treat a unique case of concha-type microtia in which the 10-year-old male patient had only a portion of pre-existing cartilage at the tragus site. An anomalous skin lump was also present. During the initial stages of the reconstruction, the two-stage Nagata method was used for surgical correction of the microtia. An autologous rib cartilage graft was used to form the ear framework. A temporoparietal fascia flap was also constructed. Remnant skin tags and anomalous cartilage that accompany microtia are usually removed during microtia repair. However, the cartilage and skin lump were preserved during the reconstruction. The skin lump was later used to form a vascularized chondrocutaneous island flap that supplemented the portion of cartilage during tragus formation. The result was a new tragus that was satisfactorily improved in both size and shape. Patients with concha-type microtia may benefit from the use of this new method for tragus formation.

• 조명전기설비학회논문지
• /
• 제28권5호
• /
• pp.60-67
• /
• 2014

Wind power is one of the fastest growing renewable energy sources. The blades length and tower height of wind turbine have been growing steadily in the last 10 years in order to increase the output amount of wind power energy. The amount of wind turbine energy is increased by increasing the capacity of wind turbine, but the costs of preventive, corrective and replacement maintenance are also increased accordingly. Recently, Condition Monitoring System that can repair the fault diagnose and repair of wind turbine in the real-time. However, these system have a problem that cannot predict and diagnose of the fault. In this paper, wind turbine predict methodology is proposed by using the SVM method. In the case study, correlation analysis between wind turbine fault and external environmental factors is performed by using the SVM method.

• 대한구순구개열학회지
• /
• 제15권1호
• /
• pp.21-28
• /
• 2012

Unilateral cleft lip is not a simple and independent problem in all aspects. nasal deformity results from the cleft lip, maxillary hypoplasia, and abnormal muscular pull on the nasal structures, including abnormal muscular tension on the alar base and abnormal position of the orbicularis oris muscle. Its gross and histopathologic characteristics include widening of the alar base, a midline deviation of the columella and septum to the noncleft side, dorsal displacement of the dome, lateral rotation of medial crura, buckling of the alar cartilage, and underdevelopment of the pyriform aperture. Since Dr. Millard first presented his method for repair of the unilateral cleft lip and nasal deformity in 1955, no other technique has gained as much popularity as the rotation-advancement principle. Principles established more than 50 years ago and techniques are evolving continuously. Unlike earlier procedures, this repair gives the surgeon the opportunity to manipulate the individual cleft elements through various modifications while maintaining Millard's original surgical and anatomical goals. Although this strategy is applied worldwide, successful execution is variable and highly operator dependent. Millard and many other surgeons have made technical variations to adjust the procedure to each specific patient, to address some of its faults, and to gain new advantages. We will review the Mulliken's modifications that Dr. Millard made to his original rotation-advancement principle and inform cases applied modifying the rotation-advancement principle.

• Archives of Reconstructive Microsurgery
• /
• 제8권1호
• /
• pp.44-49
• /
• 1999

From January 1990 to December 1998, 449 consecutive single-digital replantations were reviewed retrospectively in order to determine the essential number of vascular anastomoses for successful finger replantation. The correlations between the number of anastomosed vessels and survival rate were examined according to the amputated digital levels and all of the correlated results were compared with each other statistically. In zone I, The survival rate of the digits with a repaired vein was higher than that of digits treated with external bleeding method. In zone II, the equal number(s) between the arterial and venous repair was an important factor in successful replantation. And the repaired arteries more than repaired veins in number led to venous congestion and resulted in a failure of replantation, which was maybe due to the large amount of arterial input relative to small volume of amputated stump with small sized vein. In zone III, the equal number(s) between the arterial and venous repair was also an important factor in successful replantation. But unlike in zone II, venous congestion was scarcely happened if the venous drainage was sufficient with a repaired large vein alone. In zone IV, two or more arteries and veins were required for successful replantation. In conclusion, it is desirable that the repair of vessels as many as possible to increase the possibility of a good result. But digital amputations and their condition for replantation were variable, therefore, the numbers in vascular repair should to be modified and straightforward as the case may be.

• Journal of Chest Surgery
• /
• 제46권2호
• /
• pp.93-97
• /
• 2013

Background: Minimally invasive cardiac surgery has emerged as an alternative to conventional open surgery. This report reviews our experience with atrial septal defect using the da VinciTM surgical robot system. Materials and Methods: This retrospective study included 50 consecutive patients who underwent atrial septal defect repair using the da VinciTM surgical robot system between October 2007 and May 2011. Among these, 13 patients (26%) were approached through a totally endoscopic approach and the others by mini-thoracotomy. Nineteen patients had concomitant procedures including tricuspid annuloplasty (n=10), mitral valvuloplasty (n=9), and maze procedure (n=4). The mean follow-up duration was $16.9{\pm}10.4$ months. Results: No remnant interatrial shunt was detected by intraoperative or postoperative echocardiography. The atrial septal defects were mainly repaired by Gore-Tex patch closure (80%). There was no operative mortality or serious surgical complications. The aortic cross clamping time and cardiopulmonary bypass time were $74.1{\pm}32.2$ and $157.6{\pm}49.7$ minutes, respectively. The postoperative hospital stay was $5.5{\pm}3.3$ days. Conclusion: The atrial septal defect repair with concomitant procedures like mitral valve repair or tricuspid valve repair using the da VinciTM system is a feasible method. In addition, in selected patients, complete port access can be helpful for better cosmetic results and less musculoskeletal injury.

• 대한전자공학회논문지SD
• /
• 제47권11호
• /
• pp.30-36
• /
• 2010

최근의 메모리 반도체에 있어서, 수율과 품질을 유지하기 위하여 불량셀은 반드시 수리가 필요하다. 대부분의 워드단위 입출력을 갖는 system-on-chip (SoC)를 포함한 많은 메모리가 다중 블록으로 구성되어 있음에도 불구하고, 기존의 대부분의 자체내장수리연산회로의 연구들은 단일블록을 대상으로 하였다. 워드 단위 입출력 메모리의 특성상 다중메모리 광역대체수리구조를 갖는 경우가 많다. 본 논문에서는 이러한 메모리를 대상으로 기존에 최적 수리효율을 갖는 대표적인 자체내장 수리연산 회로인 CRESTA를 기본으로 하여, 보다 적은 면적으로 최적 수리효율을 낼 수 있는 알고리즘과 연산회로을 제안한다. 제안하는 자체내장수리 회로는 단위블록의 연산결과를 순차적으로 비교하여 워드단위 메모리의 제약조건을 만족시키는 최종 수리해를 구해내며, 기존의 회로보다 훨씬 빠른 시간 내에 최적의 수리 해를 구해 낼 수 있다.