• 대한치과보철학회:학술대회논문집
• /
• 1998.11a
• /
• pp.86-86
• /
• 1998

• Journal of the Korea Construction Safety Engineering Association
• /
• s.31
• /
• pp.60-72
• /
• 2005

• Proceedings of The Korean Cleft Lip And Palate Association
• /
• 2002.02a
• /
• pp.11-28
• /
• 2002

• Journal of KIBIM
• /
• v.9 no.1
• /
• pp.11-21
• /
• 2019

Recently, there is an increase in fire incidents in building structures. Due to this, the importance of fire-damaged buildings' safety diagnosis and evaluation after fire is growing. However, the existing fire-damaged safety diagnosis and evaluation methods are personnel-oriented, so the diagnostic results are intervened by investigators' subjectivity and unquantified. Thus, improper repair and reinforcement can result in secondary damage accidents and economic losses. In order to overcome these limitations, this study proposes using 3D laser scanning technology. The case analysis of fire-damaged building structures was conducted to verify the effectiveness of accuracy and manpowering by comparing the existing method and the proposed method. The proposed method using 3D laser scanning technology to obtain point cloud data of fire-damaged field. The point cloud data and BIM model is combined to inspect the fire-damaged area and depth. From inspection, quantified repair and reinforcement quantity take-off can be acquired. Also, the proposed method saves half of the manpowering within same time period compared to the existing method. Therefore, it seems that using 3D laser scanning technology in fire-damaged safety diagnosis and evaluation will improve in accuracy and saving time and manpowering.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.4
• /
• pp.348-355
• /
• 2006

Tennison was the first to recognize and to preserve the Cupid's bow by lowering the peak in the margin of the cleft. Randall had modified the Tennison's repair based on accurate measurements. Bardach's technique evolved from the basic concept of triangular flap cleft lip repair described by Tennison-Randall method. Precise measurements are used to define the dimensions of the equilateral triangular flap, which is created on the cleft side and is inserted into an equilateral triangular defect on the noncleft side. Two symmetrical vertical distances on either side of the cleft are thus formed. It is essential that the incisions in the skin correspond precisely with those on the muscles and mucosa, and that all layers are sutured with the use of the triangular flap, thus preventing vertical scar contracture. This procedure produces a symmetric, balance lip with a well-defined Cupid's bow, a symmetric vermilion, and a properly aligned orbicularis oris muscle. We had treated three patients with unilateral incomplete cleft lip by using Bardach's triangular flap method. The operation scars could be reduced comparing to Millard method because Bardach's method did not use the columella base and the alar base incision. And the flap design was more simple and accurate comparing to Tennison-Randall method. On the other hand, the postoperative scars on the philtrum pointed as a disadvantage of triangular flap method were cosmetically acceptable because the three patients had incomplete cleft lip. We have experienced that Bardach's triangular flap is a recommendable technique for the repair of unilateral incomplete cleft lip.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.172-178
• /
• 2021

In the ship repair market, interest in maintenance and repair is steadily increasing due to the reinforcement of prevention of environmental pollution caused by ships and the reinforcement of safety standards for ship structures. By reflecting this effect, the number of requests for repairs by foreign shipping companies increases to repair shipbuilders in the Southwest Sea. However, because most of the repair shipbuilders in the southwestern area are small and medium-sized companies, it is difficult to lead to the integrated synergy effect of the repair shipbuilding companies. Moreover, the infrastructure is not integrated; hence, using the infrastructure jointly is a challenge, which acts as an obstacle to the activation of the repair shipbuilding industry. Floating docks are indispensable to operating the repair shipbuilding business; in addition, most of them are operated through renovation/repair after importing aging caisson docks from overseas. However, their service life is more than 30 years; additionally, there is no structure inspection standard. Therefore, it is vulnerable to the safety field. In this study, the finite element analysis program of ANSYS was used to evaluate the structural safety of the modified caisson dock and obtain additional structural reinforcement schemes to solve the derived problems. For the floating docks, there are classification regulations; however, concerning structural strength, the regulations are insufficient, and the applicability is inferior. These insufficient evaluation areas were supplemented through a detailed structural FE-analysis. The reinforcement plan was decided by reinforcing the pontoon deck and reinforcement of the side tank, considering the characteristics of the repair shipyard condition. The final plan was selected to reinforce the side wing tank through the structural analysis of the decision; in addition, the actual structure was fabricated to reflect the reinforcement plan. Our results can be used as reference data for improving the structural strength of similar facilities; we believe that the optimal solution can be found quickly if this method is used during renovation/repair.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.11a
• /
• pp.43-48
• /
• 2002

Since the basement building like the communication hole and etc. is built under the ground where it is pressed by the water, the leakage happens due to the dried-shrinking crack, the sinking crack, the creation of the work-joint of the building and etc. caused by the character of the material and construction way of the reinforced concrete building. Especially, a lot of repair for the leakage cannot help but being taken in temporary way without any noticeable countermeasure. Therefore, this kind of repair is socially criticized many times that this is defective construction even if this costs a lot. The fundamental reason of the above mentioned symptoms can be found in the creation of the work-joint caused by the character of the concrete building, the limitation of the physical performance of the existing water-proof and repair material, the limitation of the construction, the limitation of the physical sustaining performance of the concrete building, the limitation(heat-injury, deterioration) of the constancy of the durability caused by aging and etc. Therefore, in this study, we would like to present the better understanding on the water-proof seal relating to the application at the spot and its test evaluation related data since the necessity of the establishment of the quality control standard and the performance testing way on the relevant water-proof seal is rising a lot to regulate the water-proof technology and the leakage repair technology in accordance with the growth of the demand on the facility.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.105-110
• /
• 2001

Autoclave curing using the vacuum bagging method is widely used for the manufacture of advanced composite prepreg airframe structures. Due to increasing use of advanced composites, specific techniques have been developed to repair damaged composite structures. In order to repair the damaged part, it is required that the damaged areas be removed, such as skin and/or honeycomb core, by utilizing the proper method and then repairing the area by laying up prepreg (and core) then curing under vacuum using the vacuum bagging materials. It shall be cured either in an oven or autoclave per the original specification requirements. Delamination can be observed in the sound areas during and/or after a couple times exposure to the elevated curing temperature due to the repeated repair condition. This study was conducted for checking the degree of degradation of properties of the cured parts and delamination between skin prepreg and honeycomb core. Specimens with glass honeycomb sandwich construction and glass/epoxy prepreg were prepared. The specimens were cured 1 to 5 times at $260^{circ}F$ in an autoclave and each additionally exposed 50, 100 and 150 hours in the $260^{circ}F$ oven. Each specimen was tested for tensile strength, compressive strength, flatwise tensile strength and interlaminar shear strength. To monitor the characteristics of the resin itself, the cured resin was tested using DMA and DSC. As a results, the decrease of Tg value were observed in the specific specimen which is exposed over 50 hrs at $260^{circ}F$. This means the change or degradative of resin properties is also related to the decrease of flatwise tensile properties. Accordingly, minimal exposure on the curing temperature is recommended for parts in order to prevent the delation and maintain the better condition.

• Clinics in Shoulder and Elbow
• /
• v.5 no.1
• /
• pp.55-62
• /
• 2002

Purpose : To compare and analyze the results of arthroscopic subacromial decompression and rotator cuff repair between partial rotator cuff tear and complete rotator cuff tear. Material and Methods : The authors studied 42 patients of rotator cuff tear with operation and followed over one year at Dankook university hospital from September, 1998 to March, 2001 The patient average age is 53 years and follow up period is 23 months (12-42mon1hs). We obtained 22 cases in the partial rotator cuff tear group and 20 cases in the complete rotator cuff tear group. In all cases, we used ASES methods to evaluated pain scale and function. Result : In the last follow up patients, the pain scale is decreased from 7.2 to 0.9 (ASES method : 34 to 91) in the partial rotator cuff tear group and from 7.6 to 1.2 (ASES method . 29 to 88) in the complete rotator cuff tear group, but there was no evidence of statistical difference between two groups (P>0.05). The range of motion after operation were increased in two groups. Excellent to good results were obtained 93％ and 95％ patients had pain relief and satisfied function. Conclusion : Arthroscopic subacromial decompression and arthroscopic rotator cuff repair showed good results for both of (ult-thickness and partial thickness rotator cuff tear patients in pain relief and improving the function.

• Archives of Plastic Surgery
• /
• v.33 no.3
• /
• pp.308-312
• /
• 2006

Time to time, we face patients who missed the proper time for primary palatal repair. Although we do not have enough available documents, it is important to establish efficacy of palatal repair in patients more than 4 years old. From May 1995 to March 2005, we selected 14 patients who underwent palatal repair in more than 4 years old patients and they are able to tolerate speech articulation tests. Out of 14 patients 5 males an 9 females in sex, aged form 4 to 50 years old. 6 patients with incomplete cleft palate and 8 patients with submucous cleft palate. Double reversing Z-plasty(n=5), pushback palatoplasty(n=4), two flap palatoplasty(n=2), von Langenbeck palatoplasty(n=2), and intravelar veloplasty(n=1) were performed. Preoperative and postoperative speech articulation test, "Simple method of speech evaluation in Korean patients with cleft palate", were conducted. Satisfaction rate was sorted into 5 levels. There is no significant statistical correlation in the speech improvement, satisfaction rate, patients sex, cleft type and operative method. But there is significant statistical correlation between the speech improvement and patienet's age. There were better result in younger patient group than aged patients group.