• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.6
• /
• pp.707-712
• /
• 2015

The rapid spread of solar power plants with a variety of design, development, construction, maintenance and related technology companies to co-vary. In this paper, we review and research necessary to proceed with a technical background and potential and further development to control various operating solar power plants in the new and older remotely.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.12-16
• /
• 2007

A dynamic model of proton exchange membrane fuel cell(PEMFC) system is designed to understand the performance of the PEMFC in residential power generator(RPG) over various balance of plant(BOP) options. In particular, since the performance of PEMFC system should be optimized for given operating ranges, it is necessary to design suitable BDP components which can support the operating ranges. The objective of this study is to develop a dynamic system model for the study of PEMFC performance over various BOP options. Therefore, a dynamic model is composed of a PEMFC stack model, a water management system model, a thermal management system model and a fuel/air supply model and the model is integrated under SIMULINK(R)environment. Basic simulation results will be presented.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.614-618
• /
• 2009

The effects of design parameters for small scale hydro power(SSHP) plants due to rainfall condition have been studied. The model to predict hydrologic performance for SSHP plants is used in this study. The results from analysis for rainfall conditions based on KIER model show that the capacity and load factor of SSHP site had large difference between the period. Especially, the hydrologic performance of SSHP site such as design flowrate due to rainfall condition of recent period varied sensitively. And also, the methodology represented in this study can be used to decide the primary design specifications of SSHP sites.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.160.2-160.2
• /
• 2011

바다를 가로막는 방벽이나 방조제의 배수갑문 또는 조력발전소의 수문과 같이 인공 해양구조물을 통하여 흐르는 고속 해류를 이용하여 발전하는 해류발전 방식에 있어서, 고속 해류에 적합한 수차터빈과 발전기의 특성을 알아보았다. 조석간만의 차가 큰 지역에 설치되는 인공 해양구조물을 지나는 해류는 인공 해양구조물 전후에 발생하는 해수의 위치에너지 차이가 운동에너지로 바뀌면서 조석간만의 자연현상에 의해 발생되는 조류의 속도보다 훨씬 더 빠르게 흐른다. 이론적으로 우리나라의 서해안의 조석간만의 범위 3~8m로부터 7.5~12m/s 정도의 고속 해류가 가능하다. 이러한 경우에 적합한 해류발전기는 수차터빈 날개지름의 크기가 5m에서부터 12m 이하이면서, 증속기어박스와 발전기, 유압시스템 및 냉각시스템 그리고 전력변환장치를 포함하는 발전시설들을 해수면 위에 설치하는 것이 바람직하다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.71-73
• /
• 2008

Different biosolid fuel (wood pellet) properties between trunk and root of pine (Pinus densiflora) biomass were investigated. Trunk has more organic solvent extracts and Klason lignin content which has higher heating values than root biomass component. In root biomass, polysaccharides content was higher than trunk biomass. Based on Higher Heating Value (HHD) analysis and ash content, trunk biomass showed better solid fuel characteristics than root biomass. But pine root biomass had lower HHD than trunk biomass, its HHD values were higher than other hardwood or annual plant lignocellulosic biomass.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.157-160
• /
• 2008

본 연구에서는 디스크 이동식 폐타이어 열분해 실증 설비(10톤/일)를 설계, 제작 그리고 시운전을 통하여 열분해 설비의 안정적인 연속 운전이 가능함을 확인하였다. 시운전 결과 반응기 내부 온도는 $500{\sim}600^{\circ}C$, 내부 압력은 $-80{\sim}-100mmHg$, 체류시간은 $60{\sim}90min$ 범위에서 안정적인 열분해가 일어났다. 또한 이번 과제 수행을 통해NC 가스의 연소기를 개발 적용하여 NC 가스의 열분해 열원으로 사용 가능성을 확인하였으며, NC 가스 연소 시 대기 측정을 통하여 규제치도 만족함을 확인할 수 있었다. 지금까지 나온 결과는 장기 연속 운전과 scale-up을 위한 기초 자료가 될 것이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.234-237
• /
• 2008

분류층 가스화기에서 가스화기 운전 온도는 슬래그의 원활한 배출과 가스화기 성능 등에 영향을 미친다. 가스화기 운전온도는 또한, 석탄 및 산소 소비량에도 영향을 미쳐 궁극적으로는 가스화 플랜트의 주요 설비 용량을 결정하는 주요 요인중의 하나이다. 가스화기 운전 온도가 일정수준 이상으로 증가할 경우 냉가스 효율이 저하되고 가스화 성능에 약 영향을 미친다. 본 논문에서는 Coal 및 Flux 공급장치, 슬래그 배출장치 당의 구성을 설명하고 Flux 투입량에 따른 슬래그 Tcv, 가스화기 성능 등을 예측하였다. 또한, 300MW IGCC 실증 가스화플랜트 엔지니어링을 위한 예비단계로 석회석 투입에 따른 Flux 공급장치를 포함한 Feeding 설비 용량, 슬래그처리설비 용량, 가스화기 내부 및 출구 적정온도를 예측하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.242-245
• /
• 2008

In the power generation industry, various efforts are needed to cope with tightening regulation on carbon dioxide emission. Integrated gasification combined cycle (IGCC) is a relatively environment friendly power generation method using coal. Moreover, pre-combustion $CO_2$ removal is possible in the IGCC system. Therefore, much effort is being made to develop advanced IGCC systems. However, removal of $CO_2$ may affect the system performance and operation through reduction of fuel gas supplied to the gas turbine. This study predicts system performance change due to $CO_2$ capture by pre-combustion process from the normal IGCC performance without $CO_2$ capture and presents results of design parametric analysis.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.1
• /
• pp.40-45
• /
• 2011

As increasing the importance of renewable energy recently, the scale of a wind power plant is increasing to the number of GW scale and specially, it is trend to move from onshore to offshore to use the higher quantity and quality of wind. Consequently to meet the trend, it is largely considered the importance of communication protocol to control and monitor remotely. But, because the communication protocol between the control center and a wind turbine has been independently developed by each wind turbine vendor, it is absence of the compatibility and extensibility when the heterogeneous wind turbines are installed in the wind farm. The IEC 61400-25 is the specifying standard for these problems in Europe. In this paper, we will show the state of these problems and present a new structure of communication based on the IEC 61400-25 to get the compatibility and extensibility between a control center and wind turbines.

• Journal of Navigation and Port Research
• /
• v.36 no.2
• /
• pp.113-121
• /
• 2012

According to the climate change and the improvement of income level, floating building on water has been emerging as a strong alternative. This study was intended to suggest some reference materials of sustainability for new floating building projects. The concept of sustainability and floating building was investigated, and 3 realized projects and 3 planned projects were reviewed in terms of sustainability. Sustainable features of the sample projects can be summarized as recycled and relocatable usage, adoption of various renewable energy techniques, installation of self-supporting plant, application of modular system and others like new material & open layout. Sustainable features need to be developed more and more in detail and applied to many types of floating buildings.