• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.3
• /
• pp.267-277
• /
• 2009

Recently implant supported single crown is the popular treatment option to replace a single missing tooth. The purpose of this retrospective study was to analyze and evaluate the survival of implants with the $TiUnite^{TM}$ surface for single tooth replacement. From September 2002 to December 2006, 269 TiUniteTM surfaced implants were used in single tooth replacements at the Institute of Oral Health Science, Samsung Medical Center. Twenty one cases were excluded because of neighbor implants, missing records & short follow up period. Among 248 implants, the 129 implants (52.0%) were inserted in the maxilla and 119 (48.0%) in the mandible. One hundred implants placement (40.3%) were combined with guided bone regeneration, and 36 implants placement (14.5%) were combined with sinus bone augmentation. Mean observation period was $26.0{\pm}11.8$ months after implant placement. Twelve implants were recorded as failures, rendering a single implant survival rate of 95.2% over the observation period. Among failed 12 implants, 10 implants placed in the maxilla. The survival rate in the maxilla was 92.2% and in the mandible was 98.3%. The use of $TiUnite^{TM}$ surfaced single implant placement showed high survival rate for short time period.

• Imaging Science in Dentistry
• /
• v.45 no.1
• /
• pp.31-39
• /
• 2015

Purpose: This study was performed to evaluate the feasibility of visualizing soft tissue lesions and vascular structures using contrast-enhanced cone-beam computed tomography (CE-CBCT) after the intravenous administration of a contrast medium in an animal model. Materials and Methods: CBCT was performed on six rabbits after a contrast medium was administered using an injection dose of 2 mL/kg body weight and an injection rate of 1 mL/s via the ear vein or femoral vein under general anesthesia. Artificial soft tissue lesions were created through the transplantation of autologous fatty tissue into the salivary gland. Volume rendering reconstruction, maximum intensity projection, and multiplanar reconstruction images were reconstructed and evaluated in order to visualize soft tissue contrast and vascular structures. Results: The contrast enhancement of soft tissue was possible using all contrast medium injection parameters. An adequate contrast medium injection parameter for facilitating effective CE-CBCT was a 5-mL injection before exposure combined with a continuous 5-mL injection during scanning. Artificial soft tissue lesions were successfully created in the animals. The CE-CBCT images demonstrated adequate opacification of the soft tissues and vascular structures. Conclusion: Despite limited soft tissue resolution, the opacification of vascular structures was observed and artificial soft tissue lesions were visualized with sufficient contrast to the surrounding structures. The vascular structures and soft tissue lesions appeared well delineated in the CE-CBCT images, which was probably due to the superior spatial resolution of CE-CBCT compared to other techniques, such as multislice computed tomography.

• Journal of Broadcast Engineering
• /
• v.19 no.3
• /
• pp.342-354
• /
• 2014

This paper deals with digital watermarking methods to protect ownership of image with targeting the ultra-high multi-view or free-view image service in which an arbitrary viewpoint image should be rendered at the user side. The main purpose of it is not to propose a superior method to the previous methods but to show how difficult to construct a watermarking scheme to overcome the viewpoint translation attack. Therefore we target the images with various attacks including viewpoint translation. This paper first shows how high the error rate of the extracted watermark data from viewpoint-translated image by basic schemes of the method using 2DDCT(2D discrete cosine transform) and the one using 2DDWT(2D discrete wavelet transform), which are for 2D image. Because the difficulty in watermarking for the viewpoint-translated image comes from the fact that we don't know the translated viewpoint, we propose a scheme to find the translated viewpoint, which uses the image and the corresponding depth information at the original viewpoint. This method is used to construct the two non-blind watermarking methods to be proposed. They are used to show that recovery of the viewpoint affect a great deal of the error rate of the extracted watermark. Also by comparing the performances of the proposed methods and the previous ones, we show that the proposed ones are better in invisibility and robustness, even if they are non-blind.

• The Journal of the Korea Contents Association
• /
• v.14 no.10
• /
• pp.506-513
• /
• 2014

As a measure to overcome the limit of small city which is weak in spontaneous competitiveness and to improve the quality of environmental, cultural and economic life of dwellers, it analyzed the geographical characteristics of city, movement path, economic status and other simple problems comprehensively and produced the vague problem solutions for dwellers and the practical direction for design using the 3D simulation rendering in order to suggest the result to change the potential for urban policy into substantial alternative. Geochang-gun selected as research area is evaluated for the place with high symbolic value of bridge in terms of environment, and the new design development for this kind of public design can be the good measure to increase the competitiveness of the city. This research is to understand the direction of the bridge recreation project which provides the cultural space connecting with other areas and improves the competitiveness of small city and to suggest the appropriate bridge design in order to provide the reasonable maintenance direction related to the future development of public design and the achievement of the symbolism of the region and to suggest the examples of public design for the urban competitiveness. For this purpose, focusing on Wicheon-stream in Geochang County, Gyeongsangnam-do selected as the research and development area for bridge design, it is to design the concept design bridge newly emphasizing the symbolism of bridge-oriented city for the development of future city.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.3
• /
• pp.163-171
• /
• 2017

Effects of different packaging methods for maintaining the shelf life and postharvest quality of iceberg lettuce (Lactuca sativa L.) were studied after harvesting in summer season. Lettuce heads were packaged in plastic crate with or without different films such as (A) Individual lettuce head sealed packaging with linear low density polyethylene (LLDPE) film; (B) Packaging lettuce head in plastic crate and wrapped with LLDPE film; (C): Individual lettuce head sealed packaging with perforated high density polyethylene (HDPE) film; (D) Packaging lettuce head in plastic crate and wrapped with perforated HDPE; and (E) Packaging lettuce head in plastic crate without any film (control), and stored at $2^{\circ}C$ for 35 days. Several quality parameters such as fresh weight loss, SPAD (soil & plant analyzer development) meter value, respiration rate, moisture content and appearance of lettuce were investigated. The lettuce wrapped with individually-sealed LLDPE film showed the lowest weight loss and the highest SPAD value rendering the best appearance index among the treataments throughout the three-week storage period at $2^{\circ}C$. Extending the freshness of iceberg lettuce during low temperature storage will definitely increase the salability potential in the domestic market even during summer season.

• Ocean Science Journal
• /
• v.41 no.1
• /
• pp.11-29
• /
• 2006

We investigated species composition and spatial distribution of the euphausiid community in the Yellow Sea and identified the relationship with environmental factors (temperature, salinity, chlorophyll $\alpha$, nitrate, phosphate, and silicate) using bimonthly data from June, 1997 to April, 1998. The environment varied during the sampling period. In warm seasons, thermocline was well developed rendering lower temperature and higher salinity and nutrient concentrations in the bottom layer. During cold seasons the water column was well mixed and no such vertical stratification was noted. Horizontal distribution of temperature, however, differed slightly between near-coast and offshore areas because of the shallow depth of the Yellow Sea, and between southern and northern areas because of the intrusion of water masses such as Yellow Sea Warm Current and Changjiang River Diluted Water. Four euphausiid species were identified: Euphausia pacifica, E. sanzoi, Pseudeuphausia sp. and Stylocheron affine. E. sanzoi and S. affine were collected, just one juvenile each, from the southern area in June and December, respectively. Pseudeuphausia sp. were collected in the eastern area all the year round except June. E. pacifica occurred at the whole study area and were the predominant species, representing at least 97.6% of the euphausiid abundance. Further, the distribution pattern of the species was varied in regards to developmental stages (adult, furcilia, calyptopis, egg). From spring to fall, E. pacifica adults were abundant in the central area where the Yellow Sea Bottom Cold Water prevailed. Furcilia and calyptopis extended their distribution into nearly all the study area during the same period. From late fall to winter, adults were found at the near-coastal are a with similar pattern for furcilia and calyptopis. The distribution pattern of E. pacifica was consistent regarding temperature, salinity, and three nutrients during the sampling period, whereas chlorophyll $\alpha$ showed a different pattern according to the developmental stages. The nutrients should indirectly affect via chlorophyll $\alpha$ and phytoplankton concentration. With respect to these results, we presented a scenario about how the environmental factors along with the water current affect the distribution of E. pacifica in the Yellow Sea.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.10
• /
• pp.1507-1516
• /
• 2002

Meat and bone meal is a valuable protein and mineral source in diets of production animals and contributes to the protein, energy and mineral component of diets. The aim of the present study was to more accurately characterise the apparent ileal amino acid digestibility of meat and bone meals produced in New Zealand and evaluate routine in vitro assays used in practise to measure meat and bone meal quality. A total of 94 commercial meat and bone meals from 25 New Zealand rendering plants over a two and a half year period were analysed for proximates, gross energy, gross amino acid content (incl. hydroxyproline, hydroxylysine and lanthionine), apparent ileal amino acid digestibility, pepsin nitrogen digestibility, protein solubility and bone content. The mean crude protein content of the 94 meat and bone meal samples was 56.8% with a range of >35% units and a coefficient of variation of 9.8%. The mean crude fat and ash content were 10.0 and 28.4% respectively. These latter components showed a large range (16 and 43%, respectively) with coefficients of variation above 22%. Amino acid digestibility between samples was highly variable with lysine and sulphur amino acids digestibility ranging between 45.8-89.0 and 38.2-85.5%, respectively. Pearson correlation coefficients are presented between crude protein content and individual gross amino acids, crude protein content and individual digestible amino acid content, and pepsin N digestibility and individual digestible amino acid content. There was a significant relationship between the digestible amino acid nitrogen content and the crude protein content while pepsin nitrogen digestibility was not correlated to ileal amino acid nitrogen digestibility (r=-0.06). Meat meals with a high protein content had relatively low hydroxyproline and hydroxylysine levels something that was attributed to the levels of collagen from bone. The data indicated that lanthionine (formed upon heat treatment of cysteine with a hydroprotein) is not a good indicator of the heat treatment employed to meat and bone meals. Step-wise multiple regression equations to predict the apparent digestible content of amino acids from rapid in vitro assays are presented. The most selected variables included ash and crude fat content. In general the equations derived for the essential amino acids had a higher degrees of fit (R2) compared to the non-essential amino acids. The R2 for the essential amino acids ranged from 0.43 for histidine and 0.68 for leucine. These equations provide a means of more rapidly estimating the apparent ileal digestible amino acid content (protein quality) of meat and bone meal using standard analyses.

• Journal of the Korean Chemical Society
• /
• v.50 no.3
• /
• pp.237-242
• /
• 2006

Nowadays, LEDs has been applied to the luminescent devices of various fields because of the invention of high efficient blue chip. Recently, especially, the white LEDs composed of InGaN blue chips and a yellow phosphor (YAG:Ce3+) have been investigated extensively. With the exception of YAG:Ce3+ phosphor, however, there are no reports on yellow phosphor that has significant emission in the 450~470 nm excitation range and this LED system is the rather low color rendering index due to their using two wavelength. Hence, we have attempted to synthesize thiogallate phosphors that efficiently under the long wavelength excitation range in the present case. Among those phosphors, we have synthesized Sr2Ga2S5:Eu2+ phosphor by change the host material of SrGa2S4:Eu2+ which is well known phosphor and we investigated the luminescent properties. In order to obtain the harmlessness and simplification of the synthesis process, sulfide materials and mixture gas of 5 % H2/95 % N2 were used instead of the CS2 or H2S gas. The prepared phosphor shows the yellow color peaking at the 550 nm wavelength and it possible to emit efficiently under the broad excitation band in the range of 300~500 nm. And this phosphor shows high luminescent intensity more than 110 % in comparison with commercial YAG:Ce3+ phosphor and it can be applied for UV LED due to excitation property in UV region.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.4
• /
• pp.628-645
• /
• 2010

To perform the engagement level simulation between the underwater vehicle model and the surface model those are constituted with various systems/ sub-systems, we implemented four different federates as a federation according to the IEEE 1516 HLA (High Level Architecture) protocol that is the international standard in the distributed simulation. Those are CFCS (Command and Fire Control System) federate, motion federate, external entities (torpedos, countermeasure and surfaceship) federate, and visualization federate that interacts with OSG (Open Scene Graph)-based visualization rendering module. In this paper, we present the detailed method about the model constitution for discrete event simulation in the distributed environment. For the sake of this purpose, we introduce the DEVS (Discrete Event System Specification)-HLA-based modeling method of the CFCS federate that reflects not only the interations between models, but also commands from user and tactics manager that is separated from the model. The CFCS federate makes decisions in various missions such as the normal diving, the barrier misision, the target motion analysis, the torpedo launch, and the torpedo evasion. In the perspective of DEVS modeling, the CFCS federate is the coupled model that has the tactical data process model, command model and fire control model as an atomic model. The message passing and time synchronization with other three federates are settled by the $m\ddot{a}k$ RTI (Runtime Infrastructure) that supports IEEE 1516. In this paper, we provides the detailed modeling method of the complicated model that has hierarchical relationship such as the CFCS system in the submarine and that satisfies both of DEVS modeling method for the discrete event simulation and HLA modeling method for the distributed simulation.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.94-98
• /
• 2006

An optical microphone based on a dual-core fiber collimator and a membrane type micromirror serving as an optical head and a reflective diaphragm respectively was implemented. The micromirror diaphragm is suspended by a thin silicon bar linked with a frame, thus it is subject to a displacement induced by acoustic waves. The optical head incorporating two collimators integrated in a single housing gives light to and receives it from the diaphragm, rendering the optical microphone structure simple and compact. This dual-core collimator having a slowing varying beam profile facilitates the initial alignment of the optical head with the diaphragm, especially the distance between them. For the assembled microphone, the static characteristics were investigated tofind the operation point defined as the optimum distance between the head and the diaphragm, and a frequency response with a variation of about $\pm$5 dB for the range of up to 3kHz was achieved.