• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.345-350
• /
• 2006

This study investigated the removal of recalcitrant organics in dyeing wastewater using a fluidized bed reactor(FBR) that contained cell-immobilized pellets. The pellets were manufactured and condensing the gel phase by mixing PEG-polymer and cells to form micro-porous PEG-polymer pellets whose size were ${\Phi}\;4mm{\times}H\;4mm$ on average. An industrial activated sludge without any pre-adaptation was used for the cell immobilization because it gave an equivalent removal efficiency to a pre-adapted sludges. The feed was obtained from an effluent of a biological treatment plant, which contained $SCOD_{Cr}$ of 330 mg/L and $SBOD_5$ of 20 mg/L. The $SCOD_{Cr}$ removal efficiency was over 45% and the effluent $COD_{Mn}$ concentration was less than 100 mg/L at HRTs from 6 to 24 hrs. The optimum HRT in the FBR was determined as 12 hrs considering the removal efficiency and cost. When a raw wastewater containing 768 mg/L of $COD_{Cr}$ was fed to the FBR, the effluent $COD_{Cr}$ concentration increased only slightly, giving a 70% of $COD_{Cr}$ removal or a 97% of $BCOD_5$ removal. This indicated that the FBR had an excellent capability of biodegradable organics removal also. In conclusion, the FBR could be applied to textile wastewater treatment in place of an activated sludge process.

• Journal of Environmental Science International
• /
• v.21 no.6
• /
• pp.667-676
• /
• 2012

This research investigated to reduce mass of heavy metals in AMD(acid mine drainage) by microbial mats formed on the channel bed. As, Cd, Cu, Fe, Mn and Zn components were monitored in water and microbial mats, at three points (AMD1, AMD2 and AMD3), in a total of six times. Average daily discharge mass of heavy metals was highest in July, Fe component contained more than 76% of total discharge mass. Discharge mass of heavy metals of AMD and heavy metal contents in microbial mats decreased with downstream at channel. Heavy metal components that average daily discharge mass is over 0.5 kg were Fe, Cu and Zn, and they were highest in July. Average removal efficiency of heavy metals in AMD was highest about 21% in Fe, this microbial mats were due to form from precipitation of Fe component in AMD by aerobic iron bacteria. Relative content for As component in microbial mats than AMD was over 16 times, this As components were due to absorb at iron oxide and iron hydroxide on the surface of microbial mats.

• Clean Technology
• /
• v.8 no.3
• /
• pp.167-172
• /
• 2002

The adaptability of earthworm casts produced form the waste sludge of pulp and paper plants for a biocarrier used in the advanced wastewater treatment was investigated. Removal efficiencies of nutrients in the activated sludge technology without carrier were compared with those treated with carrier made of casts under the different conditions such as the composition of the input and kinds of carrier. When the waste water was treated in the activated sludge technology without carriers, removal efficiencies of T-P and T-N were average values of 31% and 52%, respectively. On the contrary, pellet type carrier and pack type carrier increased the removal efficiencies of T-P and T-N by 1.3~1.4 and 1.9~2.0 times, respectively. At the same time, the high removal of T-P and T-N were observed irrespective of the types of carrier in which many kinds of microorganisms were grown. The difference in the removal efficiencies of BOD and COD between the treatment with and without carrier was negligible. According to this research, the carrier made of casts was thought to be highly applicable in the advanced wastewater treatment.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.68-71
• /
• 2004

Effects of surfactants and natural organic matter (NOM) on the sorption and reduction of tetrachloroethylene (PCE) and chromate with iron were examined in this study. PCE and chromate reduction by iron depended on the ionic type of the surfactants in this study. The apparent reaction rate constants of PCE with Triton X-100 and hexadecyltrimethyl ammonium (HDTMA) at one half and two times of the critical micelle concentration (CMC) were relatively higher than without surfactants because of the enhanced PCE partitioning and surface concentration. In the presence of sodium dodecyl benzene sulfonate (SDDBS) at 2000 mg/L and NOM at 50 mg/L, the apparent reaction rate constants of PCE increased, but TCE production decreased. The enhanced removal rate of PCE was not due to the dechlorination, and the sorption was dominant iron with SDDBS and NOM. The apparent reaction rate constants of chromate by iron with Triton X-100 and NOM were 1.4-3.1 times lower than without surfactants while that with HDTMA was two times higher than without HDTMA, When the sorbed HDTMA molecules form admicelles, negatively-charged chromate has an affinity for the positively-charged HDTMA head group.

• Journal of the Korean Society for Railway
• /
• v.17 no.5
• /
• pp.365-372
• /
• 2014

Technologies for rapid concrete curing using elevated temperature are important for saving cost and time when constricting concrete structures. Recently, a microwave heating form was developed. In this study the early strength of concrete cured by the developed form was experimentally investigated. Large scale mock up tests were conducted six times, and the results were analyzed based on the maturity theory. Logarithmic correlation curves were generated based on the measured strength and estimated maturity. It was confirmed that the strength development of the concrete cured by microwave heating form can be estimated by the equivalent age theory usually applied to steam-curing technology. By using the microwave heating form, one day at most is enough to get the required strength for the safe removal of forms, even in cold weather.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.1
• /
• pp.40-48
• /
• 2016

A siderophore-producing bacterium (i.e., Pseudomonas aeruginosa) capable of chelating Fe³⁺ from its mineral form (i.e., iron oxides) was used to enhance As uptake by plants. Since As in soil is mainly associated with iron oxides, siderophore can play an important role in As mobilization through the dissolution of As-bearing iron oxides. A series of pot experiment using Pteris cretica showed that As removal by P. cretica with siderophore-producing bacteria addition increased more than three times compared to that without bacteria addition. Competition between indigenous bacteria and introduced bacteria (i.e., P. aeruginosa) was also observed, but such competition seemed not to be significant. This study suggests that enhanced-phytoremediation by siderophore-producing bacteria addition could be a visible option for longterm As removal in the forest area at the former Janghang smelter site.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.5
• /
• pp.42-59
• /
• 2017

To investigate rooting and community forming ability, sod strips of Gramineae such as Miscanthus sacchariflorus (Maxim.) Benth., Miscanthus sinensis var. purpurascens(Andersson) Rendle, Imperata cylindrica var. koenigii(Retz.) Pilg., and Arundinella hirta(Thunb.) Tanaka were planted horizontally at a width of 10~15cm in October 2010 on the bank slope of Kwangju Stream in Korea. Seeds of each species were sown in April 2010 in plastic seedbeds(60cm length ${\times}$ 30cm width ${\times}$ 5cm depth) filled with 4cm of garden soil and grew until October 2010 to form rectangular sod, which then was cut into multiple strips(20cm length ${\times}$ 6cm width ${\times}$ 4cm root depth). Weeds growing on the experiment sites were removed twice a year until those four species had formed a community by 2013. Weeds were not eradicated during 2014 and 2015 to observe whether the community formation can be maintained without weed removal. t-tests on stem numbers and heights in May, July, and September were conducted between 2013 and 2014, and between 2014 and 2015. Stem numbers and heights of the four species in 2014 were significantly decreased(p<0.001) compared with those in 2013 due to weed damage to their growth in 2014. Stem numbers and heights of Miscanthus sacchariflorus(Maxim.) Benth., Miscanthus sinensis var. purpurascens(Andersson) Rendle, Imperata cylindrica var. koenigii(Retz.) Pilg. in 2015 were similar to those in 2014(p>0.05). Stem numbers and heights of Arundinella hirta(Thunb.) Tanaka in 2015, however, were significantly reduced compared with those in 2014(p<0.001) due to weed impact on its growth. After three years of weed removal, a community of each species was formed. Miscanthus sacchariflorus(Maxim.) Benth., Miscanthus sinensis var. purpurascens(Andersson) Rendle, Imperata cylindrica var. koenigii(Retz.) Pilg. were able to establish communities without any further weed removal. Arundinella hirta(Thunb.) Tanaka, however, was not able to maintain its community due to considerable damage to its growth caused by weeds even after three years of weed removal. Miscanthus sacchariflorus(Maxim.) Benth., Miscanthus sinensis var. purpurascens(Andersson) Rendle, Imperata cylindrica var. koenigii(Retz.) Pilg. are more suitable to sod strip plantings on stream bank slopes in terms of the maintenance of community formation without weed eradication. t-test on stem numbers and heights each September during the five year experiment period between sod strip planting and potted plants of the four species were conducted. Stem numbers of strip sod plantings were significantly higher(p<0.001) than those of potted one. Heights of strip sod plantings, however, were significantly lower(p<0.05) than those of the potted samples. Therefore, strip sod planting is more advantageous regarding bank slope erosion protection due to the higher number of stems.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2004.05a
• /
• pp.384-387
• /
• 2004

The purpose of the present investigation was to develop a novel method for cell immobilization. Aureobasidium pullulans cells were mixed with an alginate solution, and the mixture was extruded to form small gel beads as hydrated- immobilized cells. The beads were then placed at $-15^{\circ}C$ for 6-24 h to induce freeze-dehydration. The freeze-dehydration resulted in shrinkage of beads due to water removal reducing bead volume by 82% and bead weight by 85%. The dehydrated beads were successfully used for the production of fructo-oligosaccharides in a model reactor system. This study showed that bioreactor performance can be improved up to 2 times by the use of the dehydrated beads.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.105-110
• /
• 2011

The doping procedure in crystalline silicon solar cell fabrication usually contains oxygen injection during drive-in process and removal of phosphorous silicate glass(PSG). In this paper, we studied the effect of oxygen injection and PSG on conversion efficiency of solar cell. The mono crystalline silicon wafers with $156{\times}156mm^2$, $200{\mu}m$, $0.5-3.0{\Omega}{\cdot}cm$ and p-type were used. After etching $7{\mu}m$ of the surface to form the pyramidal structure, the P(phosphorous) was injected into silicon wafer using diffusion furnace to make the emitter layer. After then, the silicon nitride was deposited by the PECVD with 80 nm thickness and 2.1 refractive index. The silver and aluminium electrodes for front and back sheet, respectively, were formed by screen-printing method, followed by firing in 400-425-450-550-$880^{\circ}C$ five-zone temperature conditions to make the ohmic contact. Solar cells with four different types were fabricated with/without oxygen injection and PSG removal. Solar cell that injected oxygen during the drive-in process and removed PSG after doping process showed the 17.9 % conversion efficiency which is best in this study. This solar cells showed $35.5mA/cm^2$ of the current density, 632 mV of the open circuit voltage and 79.5 % of the fill factor.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.41-47
• /
• 1999

In this paper, we report 3D-simulations of a plasma etching process by employing cell-removal algorithm takes into account the mask shadow effect os well as spillover errors. The developed simulator haas an input interface to take not only an analytic form but a Monte Carlo distribution of the ions. The graphic user interface(GUI) was also built into the simulator for UNIX environment. To demonstrate the capability of 3D-SURFILER(SURface proFILER), we have simulated for a typical contact hole structure with 36,000($30{\times}40{\times}30$) cells, which takes about 20 minutes with 10 Mbytes memory on sun ultra sparc 1. as an exemplary case, we calculated the etch profile during the reactive ion etching(RIE) of a contact hole wherein the aspect ratio is 1.57. Furthermore, we also simulated the dependence of a damage parameter and the evolution of topography as a function of the chamber pressure and the incident ion flux.