• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.648-652
• /
• 2004

A comparative investigation of an experimental and a simulation of chemical kinetics for NOx removal from dielectric barrier discharges is presented. Several types of dielectric barrier discharges were implemented depending upon the configuration of electrodes. The simulation was based on an approximate mathematical model for plasma cleaning of waste gas. The influence of non uniform distributions of species due to the production of primary active particles in the streamer channel was taken into account. A comparison of observed experimental to the calculated removal efficiency of NOx showed acceptable agreement.

• 상하수도학회지
• /
• 제18권3호
• /
• pp.385-391
• /
• 2004

This paper examines the applicability of DAF-system to the domestic sewers for the effective CSOs treatment. The procedures for the experiment include mainly two steps. One is to analyse the water qualities and settling test of the CSOs and the other focuses on general characteristics of the CSOs such as the removal efficiency of pollutant, the distribution of particle size and mass balance of DAF-system. The result of this study show that the application of DAF-system is more effective and economical than the existing treatment systems because it has two removal mechanisms of sedimentation and flotation simultaneously.

• 반도체디스플레이기술학회지
• /
• 제6권2호
• /
• pp.35-40
• /
• 2007

An integrated material removal model considering thermal, chemical and contact mechanical effects in CMP process is proposed. These effects are highly coupled together in the current modeling effort. The contact mechanics is employed in the model incorporated with the heat transfer and chemical reaction mechanisms. The mechanical abrasion actions happening due to the mechanical contacts between the wafer and abrasive particles in the slurry and between the wafer and pad asperities cause friction and consequently generate heats, which mainly acts as the heat source accelerating chemical reaction(s) between the wafer and slurry chemical(s). The proposed model may be a help in understanding multi-physical interactions in CMP process occurring among the wafer, pad and various consumables such as slurry.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권5호
• /
• pp.16-24
• /
• 2016

A new strain of Pseudomonas sp. was isolated from mercury (Hg)-contaminated sites in Taiwan. This bacterium removed more than 80% of Hg present in the culture medium at 12 h incubation and was chosen for further analysis of the molecular mechanisms of Hg tolerance/removal abilities in this Pseudomonas sp. We used RNA-seq, one of the next-generation sequencing methods, to investigate the transcriptomic responses of the Pseudomonas sp. exposed to 60 mg/L of Hg²⁺. We de novo assembled 4,963 contigs, of which 10,533 up-regulated genes and 5,451 down-regulated genes were found to be regulated by Hg. The 40 genes most altered in expression levels were associated with tolerance to Hg stress and metabolism. Functional analysis showed that some Hg-tolerant genes were related to the mer operon, sulfate uptake and assimilation, the enzymatic antioxidant system, the HSP gene family, chaperones, and metal transporters. The transcriptome were analyzed further with Gene Ontology (GO) and Cluster of Orthologous Groups (COGs) of proteins and showed diverse biological functions and metabolic pathways under Hg stress.

• The Korean Journal of Physiology
• /
• 제25권2호
• /
• pp.159-170
• /
• 1991

In the rabbit renal artery, mechanisms of contraction by sodium depletion were investigated. The helical strips of isolated renal artery were immersed in the Tris-buffered salt solution. The contractions were recorded isometrically using a strain-gauge transducer. Na-free solution (Na was substituted by Li, choline or sucrose) produced contractions which were dependent on the nature of the Na substitutes. Na-free solution (choline) produced the contraction in ouabain-pretreated artery (Na loaded artery) even in the presence of verapamil. The amplitude of the contraction was dependent on the duration of the pretreatment with ouabain $(10\;^5M)$. Monensin potentiated the effect of ouabain on the contraction. Removal of Ca from bathing solution abolished the contraction and the substitution of Sr for Ca produced the contraction. Divalent cations such as Mg, Mn blocked the depolarization-induced contraction, while they had little effect on the Na-free contraction in Na loaded artery. These results suggest that the contraction induced by Na removal is dependent on the cellular Na content and may be caused by Ca influx via the Na-Ca exchange carrier.

• 한국습지학회지
• /
• 제20권1호
• /
• pp.63-71
• /
• 2018

강우유출 조건에서 침투도랑의 여과기작은 수리학적 조건에 따라 변화할 수밖에 없다. 침투도랑에서 유출시간에 따른 다양한 여과조건이 입자상 물질의 제거에 미치는 영향을 이해하는 것은 매우 중요하다. 본 연구에서는 도로강우 유출수 처리를 위해 설치된 우드칩 충진 침투도랑에서 일어나는 여과기작을 조사 분석하였다. 유출수문곡선을 몇 개의 영역으로 분리하고 각 영역에서의 여과 메커니즘을 분석한 결과 여과는 수직흐름과 수평흐름, 그리고 불포화 흐름, 부분 포화흐름, 그리고 포화흐름을 거치면서 진행되는 것으로 나타났다. 불포화 흐름조건에서는 입자상 물질의 제거효율은 55-76%를 나타냈으며 주요 기작은 물리적인 억류(trapping)로 나타났으며 유출유량이 크게 증가하여 침투도랑에서 포화흐름이 조성되었을 때 제거효율은 75-95%로 크게 증가하였는데 이는 확산기작의 작용 때문인 것으로 분석되었다. 강우 중단 후 유출량 감소로 침투도랑이 부분 포화흐름으로 전환되는 시점에는 음으로 하전된 공기와 물의 경계면의 존재로 여과효율이 감소한 것으로 추정된다. 강우시 급격히 변화하는 수리학적 조건에서 발생하는 흐름조건 및 여과 메커니즘과 이와 같은 인자가 여과효율에 미치는 영향을 도출하기 위하여 변수통제가 비교적 용이한 실험실 규모의 침투도랑에 대한 연구가 필요하다.

• 한국물환경학회지
• /
• 제34권1호
• /
• pp.96-108
• /
• 2018

Large efforts have recently been made on research and development of sustainable and energy-efficient short-cut nitrogen removal processes owing to strong attention to the energy neutral/positive wastewater treatment system. Anaerobic ammonium oxidizing bacteria (anammox bacteria) have been highlighted since 1990's due to their unique advantages including 60% less energy consumption, nearly 100% reduction for carbon source requirement, and 80% less sludge production. Side-stream short-cut nitrogen removal using anammox bacteria and partial nitritation anammox (PN/A) has been well established, whereas substantial challenges remain to be addressed mainly due to undesired main-stream conditions for anammox bacteria. These include low temperature, low concentrations of ammonia, nitrite, free ammonia, free nitrous acid or a combination of those. In addition, an anammox side-stream nitrogen management is insufficient to reduce overall energy consumption for energy-neutral or energy positive water resource recovery facility (WRRF) and at the same time to comply with nitrogen discharge regulation. This implies the development of the successful main-stream anammox based technology will accelerate a conversion of current wastewater treatment plants to sustainable water and energy recovery facility. This study discusses the status of the research, key mechanisms & interactions of the protagonists in the main-stream PN/A, and control parameters and major challenges in process development.

• 환경영향평가
• /
• 제21권5호
• /
• pp.707-713
• /
• 2012

There are a lot of parameters affecting microbial acclimation/cultivation characteristics such as dynamic conditions, F/M ratio and substrate affinity. From the process control point of view, the effect of high salinity on the removal efficiencies of BOD and SS have been documented by few researchers. In this research, lab-scale CAS(Conventional Activated Sludge) process and modified $A_2O$(Anaerobic/Anoxic/Oxic) process were operated and monitored to evaluate the characteristics of microbial acclimation and cultivation under high salinity wastewater during the period of three weeks. As a result of acute microbial activity test(6hr) at various $Cl^-$ concentration, the appropriate $Cl^-$ concentration for microbial growth and acclimation ranged under 3,100 mg/l. As a result of acclimation/cultivation test, the trend of COD removal efficiency reduced gradually as time elapsed. It is considered that $NH_4$-N removal phenomenon of the conventional pollutants removal mechanisms gave little effect to the microbial acclimation/cultivation under high salinity wastewater.

• 자원환경지질
• /
• 제32권1호
• /
• pp.43-51
• /
• 1999

In order to remediate hazardous waste site, a process of electrokinetically purging chemicals from saturated soil is examined by laboratory experiments. Electrokinetic soil remediation is one of the most promising soil decontamination processes that habe igh removal efficiency and time-effectiveness in low-permeability soils such as clay. Being combined with several mechanisms-electromigration, elec troosmosis, diffusion and electrolysis of water, electrokinetic soil processing can remove non-polar organics as well as ionic contaminants. The objectives of this study are; 1) the exploration of the feasibility of electrokinetic soil processing on the removal of heavy metals, 2) the investigation of applicability to the tailing-soils in aban doned mining area, 3) the examination of effects of soil pH and conductivity on the transport phenomena of elements in soils, and 4) the investigation of the applicability of the ionexchange membrance to the efficient collection of heavy metals removed from contaminated soils. With the result of this study, it is suggested that the removal efficiency is significantly influenced by applied voltage & current, type of purging solutions, soil pH, permeability and zeta potentials of soil. Although further study should be needed, it is possible to collect removed heavy metals with ion-exchange membrance in cathode compartment.

• Advances in environmental research
• /
• 제1권2호
• /
• pp.167-179
• /
• 2012

Pistachio shell (Pistacia vera) (PS), a low-cost material, has been utilized for the removal of the Cr(VI) ions after treatment with citric acid. Batch experimental steps were applied to obtain Cr(VI) ion adsorption details for the equilibrium between Cr(VI) and modified pistachio shell (MPS). The influences of contact time, pH, adsorbent dose and initial chromium concentration on the adsorption performance of MPS was investigated in detail. The results displayed that adsorption of Cr(VI) by MPS reached to equilibrium after 2 h and after that a little change of Cr(VI) removal efficiency was observed. The sorption percent is higher at lower pH and lower chromium concentration. Two possible mechanisms for reduction of Cr(VI) to Cr(III) can be suggested in Cr(VI) removal. In the first mechanism, Cr(VI) is reduced to Cr(III) by surface electron-donor groups of the adsorbent and the reduced Cr(III) forms complexes with adsorbent or remains in the solution. This Cr(III) is not adsorbed by adsorbent at pH 1.8. But in second mechanism, the adsorption-coupled reduction of Cr(VI) to Cr(III) occurred on the adsorbent sites. The equilibrium sorption capacity of Cr(VI) ion after 2 h was 64.35 mg/g for MPS.