• Journal of the Optical Society of Korea
• /
• 제12권3호
• /
• pp.166-169
• /
• 2008

The submersion monitoring system based on a reflective side-polished optical fiber submersion sensor with an optical fiber mirror was shown to be an effective alarm system with remote monitoringwhen the drainage capacity of a common utility duct is exceeded due to heavy rainfall. The proposed sensor was connected to an existing installed optical fiber network at a height of 250mm in a common utility duct, and then tested under sample materials(distilled water, river water, sea water, foul water, muddy water, petroleum, edible oil) at a distance of 1km from the sensor for remote sensing. In experiments, the proposed real-time sensor system reduced maintenance cost and improved monitoring efficiency by using a reflection-type side-polished optical fiber submersion sensor efficient for remote monitoring of a common utility duct.

• 조명전기설비학회논문지
• /
• 제21권1호
• /
• pp.82-90
• /
• 2007

이 논문은 유도전동기 원격제어를 위한 분산 임베디드시스템에 관한 연구로 제어시스템은 CAN통신을 기반으로 하는 네트워크를 구성하였으며 원격제어를 위하여 Ethernet TCP/IP-CAN 게이트웨이를 개발하였다. 이를 통하여 유도전동기 2대의 구동시스템을 제작하여 원격제어실험을 수행하였으며 실험 결과 개발된 알고리즘 및 TCP/IP-CAN 게이트웨이가 매우 우수한 성능을 가지고 있음을 확인하였다.

• 한국멀티미디어학회논문지
• /
• 제23권10호
• /
• pp.1307-1317
• /
• 2020

In recent years, the PV plant is gradually increasing in korea and has begun to focus on PV system O&M(Operation and Management). The legacy PV system can hardly be gathering realtime information. That is why it is difficult for the facility to respond immediately to situations in which problems arise. This leads to economic losses due to reduced power generation. In this study, we implemented an RMC(Remote Maintenance Control) gateway that supports multi-area equipment(inverters, junction boxes, switchboards, environmental sensors) that are not limited to specific manufacturers. It provides a function to visualize the collected data. Users can easily check the power generation and operation status of PV system equipment. In the future, we will develop an algorithm capable of analyzing beta factors that cause equipment performance degradation, parts aging, and deterioration using data collected from facilities. We intend to use this algorithm as a fundamental technology for O&M by transplanting it to the RMC gateway.

• 태양에너지
• /
• 제18권3호
• /
• pp.147-151
• /
• 1998

Several PV-diesel hybrid systems were built in isolated islands in Korea, where they are far from the inland to be supplied the electric power to a utility level from it. A lot of efforts has been concentrated to find a cost-effective electric supply system with higher reliability and minimum maintenance when compared with a diesel generator. For this purpose, an autonomous PV-diesel hybrid system with multi-channel remote monitoring system was investigated to supply electric power under minimum operating cost and maintenance in a small isolated island. In this report, the economic analysis was performed for comparison with photovoltaic system and diesel generator by computer simulation. And it was proven that a PV system is more cost-effective than an internal combustion engine for the remote island with less than 150 households. Especially, in the case of islands with less than 50 households, the initial construction cost of the PV system is comparable to and its operating cost is about 70% less than the diesel generator.

• 한국구조물진단유지관리공학회지
• /
• 제17권4호
• /
• pp.74-83
• /
• 2013

본 논문은 "구조물의 실시간 원격 모니터링 및 제어(Remote Structural Monitoring and Control in Real Time)"로 언급되는 융합기술에 초점을 맞추고 있다. 이러한 기술은 대형의 복잡한 인프라구조물의 복구나 지속성을 향상시킬 수 있다. 이러한 관점에서 본 논문은 기존의 구조물 모니터링 기술을 실시간 원격 모니터링 및 제어로 확장하고자 한다. 이는 유틸리티(Utility)의 안정적인 운영을 위한 기존 SCADA(Supervisory Control and Data Acquisition) 시스템을 발달시켜 차세대 SCADA 시스템을 개발하는 것으로 확보할 수 있다. 본 논문에서는 차세대 SCADA 시스템을 활용한 물공급 네트워크에 대해 설명하고 이를 교량이나 다른 시스템에 적용하고자 한다.

• 한국철도학회논문집
• /
• 제13권6호
• /
• pp.541-545
• /
• 2010

현대의 도시철도차량 시스템은 복잡하고 첨단화 되어 있으며, 상호 인터페이스 체계를 구축하고 있는 차량 유지보수시스템의 체계적인 종합관리가 필요하다. 본 연구는 무선 전송 장치를 이용하여 전동차 정보 자동 수집 장치를 도입 적용한 사례에 대한 분석 결과이다. 무선 전송 장치는 차량기지로 입고한 전동차 열차종합 제어장치에 수집된 각종 정보를 무선 통신으로 데이터를 전송함으로써 유지보수 비용절감과 데이터 전송의 신뢰성 향상 효과가 있으며 이러한 무선 전송 장치를 도입 적용하여 기존의 열차정보수집 방법을 개선한 운용 사례를 제시한다.

• 드라이브 ㆍ 컨트롤
• /
• 제13권1호
• /
• pp.94-99
• /
• 2016

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.432-436
• /
• 2009

This paper is described that advanced study on network design of remote diagnosis system for power facilities of electric railway. In the field, it is very difficult for worker to diagnosis power facilities including catenary because workers should be maintenance on AC power supply. Therefore, to properly design on remote diagnosis system, we have searched the inside and outside of the country-related technology trends. Also we confirmed that required technologies to design interface technology required for the development of sensor devices and the USN network was designed in accordance with required skills. Throughout variety of requirements, we have development iRFS based ZA sensors and iRFM to receive data of sensor. Also CC2420 is applied as single-chip which used 2.4GHz IEEE802.15.4 compliant RF tranciver designed for low-power and low-voltage wireless applications for ZigBee communication.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.911-916
• /
• 1991

Spent nuclear fuel is highly radioactive and requires remote operation due to radiation exposure. Motors which have been used in the highly radioactive environments are a DC type because of their easy implementation on control system. However there are some problems such as mechanical maintenance of brush and commutator, high cost, and heavy material control. AC servo motors are applied and tested on fuzzy and conventional control algorithms. Fuzzy logic controls of AC servo give adequate control accuracy and power for spent fuel handling in radioactive environments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.230-234
• /
• 1989

This paper presents the design of a prototype robot and architecture of a distributed control system. The robot, named as KAEROT, has been developed for the purpose of the reduction of personal radiation exposure and the remote maintenance tasks in nuclear facilities. The mobile system with robotic manipulator has been designed to go up and down stairs. For the dextrous handling, this manipulator will be designed as a redundant type to act like a human arm. Manipulator control system is to be extended easily for further usage with a modular architecture to get independency and reliability by minimizing EMI effects.