• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.239-242
• /
• 2006

Impervious surface is an important index for the estimation of urbanization and environmental change. In addition, impervious surface has an influence on the parameters of rainfall-runoff model during rainy season. The increase of impervious surface causes peak discharge increasing and fast concentration time in urban area. Accordingly, impervious surface estimation is an important factor of urban rainfall-runoff model development and calibration. In this study, impervious surface estimation is performed by using remote sensing images such as landsat-7 ETM+ and high resolution satellite image and regression tree algorithm based on case study area ? Jungnang-cheon basin in Korea.

• Korean Journal of Remote Sensing
• /
• v.20 no.5
• /
• pp.315-327
• /
• 2004

Nowadays, interests in land cover classification using not only multi-sensor images but also thematic GIS information are increasing. Often, although useful GIS information for the classification is available, the traditional MLE (maximum likelihood estimation techniques) does not allow us to use the information, due to the fact that it cannot handle the GIS data properly. This paper propose two extended MLE algorithms that can integrate both remote sensing images and GIS thematic data for land-cover classification. They include modified MLE and Bayesian predictive likelihood estimation technique (BPLE) techniques that can handle both categorical GIS thematic data and remote sensing images in an integrated manner. The proposed algorithms were evaluated through supervised land-cover classification with Landsat ETM+ images and an existing land-use map in the Gongju area, Korea. As a result, the proposed method showed considerable improvements in classification accuracy, when compared with other multi-spectral classification techniques. The integration of remote sensing images and the land-use map showed that overall accuracy indicated an improvement in classification accuracy of 10.8% when using MLE, and 9.6% for the BPLE. The case study also showed that the proposed algorithms enable the extraction of the area with land-cover change. In conclusion, land cover classification results produced through the integration of various GIS spatial data and multi-spectral images, will be useful to involve complementary data to make more accurate decisions.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.507-515
• /
• 2002

Remote Sensing Monitoring and Loss Estimated System of Flood Disaster based on GIS is an integrated system comprised flood disaster information receiving and collection, flood disaster simulation, and flood disaster estimation. When the system receives and collects remote sensing monitoring and conventional investigation information, the distributional features of flood disaster on space and time is obtained by means of image processing and information fusion. The economic loss of flood disaster can be classified into two pus: direct economic loss and indirect economic loss. The estimation of direct economic loss applies macroscopic economic analysis methods, i.e. applying Product (Industry and Agriculture Gross Product or Gross Domestic Product - GDP) or Unit Synthetic Economic Loss Index, direct economic loss can be estimated. Estimating indirect economic loss applies reduction coefficient methods with direct economic loss. The system can real-timely ascertains flood disaster and estimates flood Loss, so that the science basis fur decision-making of flood control and relieving disaster may be provided.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.917-919
• /
• 2003

This paper demonstrates that RADARSAT ScanSAR data can be an important data source of radar remote sensing for monitoring crop systems and estimation of rice yield for large areas in tropic and sub-tropical regions. Experiments were carried out to show the effectiveness of RADARSAT ScanSAR data for rice yield estimation in whole province of Guangdong, South China. A methodology was developed to deal with a series of issues in extracting rice information from the ScanSAR data, such as topographic influences, levels of agro-management, irregular distribution of paddy fields and different rice cropping systems. A model was provided for rice yield estimation based on the relationship between the backscatter coefficient of multi-temporal SAR data and the biomass of rice.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.192-192
• /
• 2000

In this paper, a platoon merging is considered as a remote-controlled system with the state represented by a stochastic process. In this system, it becomes to encounter situations where a single decision maker controls a large number of subsystems, and observation and control signals are sent over a communication channel with finite capacity and significant transmission delays. Unlike classical estimation problem in which the observation is a continuous process corrupted by additive noise, there is a constraint that the observation must be coded and transmitted over a digital communication channel with finite capaci쇼. A recursive coder-estimator sequence is a state estimation scheme based on observations transmitted with finite communication capacity constraint. Using the coder-estimator sequence, the remote control station designs a feedback controller. In this paper, we introduce a stochastic model for the lead vehicle in a platoon of vehicles considering the angle between a road surface and a horizontal plane as a stochastic process. The simulation results show that the inter-vehicle distance and the deviation from the desired inter-vehicle distance are well regulated.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.46-46
• /
• 2017

We developed a rice simulation model for remote-sensing (SIMRIW-RS, Homma et al., 2007) to evaluate rice production and management on a regional scale. Here, we reports its application trial to estimate rice production in farmers' fields in Sendai, Japan. The remote-sensing data for the application was periodically obtained by multispectral camera (RGB + NIR and RedEdge) attached with unmanned air vehicle (UAV). The airborne images was 8 cm in resolution which was attained by the flight at an altitude of 115 m. The remote-sensing data was relatively corresponded with leaf area index (LAI) of rice and its spatial and temporal variation, although the correspondences had some errors due to locational inaccuracy. Calibration of the simulation model depended on the first two remote-sensing data (obtained around one month after transplanting and panicle initiation) well predicted rice growth evaluated by the third remote-sensing data. The parameters obtained through the calibration may reflect soil fertility, and will be utilized for nutritional management. Although estimation accuracy has still needed to be improved, the rice yield was also well estimated. These results recommended further data accumulation and more accurate locational identification to improve the estimation accuracy.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.337-340
• /
• 2007

Many researches conducted to investigate the relationship between surface emissivity and surface temperature in the past two decades and pointed out that the emissivity play a key role in applying remote sensing data to retrieve surface temperature. The task of surface temperature estimation is so important in many research fields, such as earth energy budgets, evapotranspiration, drought, global change and heat island effect. Therefore, it is indispensable to develop an effective and accurate technique to estimate the emissivity for accurate surface temperature estimations. This study developed an improved emissivity estimation technique for the use of surface temperature retrievals with MODIS data. The result of applying this improved technique using Band 31 of MODIS shows that the accuracy of estimated surface temperatures will be improved. This study also uses MODIS data observed in 2005 to establish the relationship between the surface emissivity correction factor and NDVI. Through the use of these correction factors, the land surface temperature can be retrieved more accurate with MODIS data.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.565-565
• /
• 2004

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.292-294
• /
• 2003

Evapotranspiration estimations are essential for monitoring drought, wild land fire risk etc. In this study, a surface energy balance method, which combines meteorological observations with spectral data derived from remote sensing measurements, was used to estimate the regional evapotranspiration in the Mongolia, a large arid and semi-arid region with heterogeneous surface conditions. The Surface Energy Balance method has been applied to Landsat+ETM and NOAA-AVHRR sensors for the estimation of evapotranspiration in the grassland of Mongolia. As a result, a daily evapotranspiration map of Mongolia was produced.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.325-327
• /
• 2003

Forest biomass is the basis of forest ecosystem. With the rapid development of remote sensing and computer technology, forest biomass estimation using remote sensing data is paid great attention and has acquired great achievements. This article focuses on discussion of methods of forest biomass estimation methods using Terra/MODIS data in Northeast China. The research include: combining the MODIS time series parameters with seasonal characteristics of forest species to identify major forest species; establishing a model to estimate forest biomass based on forest species; analyzing the effects of the existent forest biomass and increasing biomass on terrestrial carbon cycle. This research can help to make clear the mechanism of carbon cycle.