• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.752-755
• /
• 1997

In this paper, a scheduling algorithm is proposed for a programmable logic controller(PLC) with remote I/Os, assuming the multi-tasking facilities. Since sequence programs are executed on the application processor and I/O data are transmitted by the network processor concurrently, the proposed algorithm schedules the data transmission as well as the sequence program execution. The suggested algorithm guarantees the bounded WCRT(worst case response time), which is the one third of the WCRT in the absence of scheduling. Computer simulation shows that the algorithm can be easily applied to a real PLC without critical constraints on utilization of resources and inter-relation among tasks.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.2
• /
• pp.96-100
• /
• 2012

Existing, widely used industrial controller programmable logic controller (PLC) using the high cost and maintenance was a difficult problem. In addition, the network configuration was not easy. Thus, the filter press by remote control and management to improve productivity and shorten maintenance time. Variety of smart devices (smart phones, iPad, tablet PC, etc.) Remote control is possible by utilizing the existing controlled by the PLC addresses maintenance and improved performance compared to that of possible filter press control and management system was developed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1127-1131
• /
• 2005

One of problems in industries is an installation for an automation system device such sensor, transducer, controller, and so on those are located in different areas. Such problem makes a difficulty for maintenance and installation. The aim of this research attempts to design a high performance controller with remote devices. One attractive is to group near devices in near place together to centralizes control. This paper presents network device groups distributed through digital and analog Remote Terminal Unit (RTUs). Such devices are centralized by computer or PLC control and communicated with similar protocol through serial bus. Our scheme, there are many advantages such as, saving both time and cost,convenience compared to other ways.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.457-461
• /
• 2002

This paper describes a development of a robot working in hazard environment. The developed robot consists of robot controller with vision system and host PC program. The robot and camera can move with 2 degree of freedom by independent remote controlling a user friendly designed joystick. An environment is recognized by the vision system and ultra sonic sensors. The visual image and command data translated through 900MHz and 447MHz RF controller, respectively. To show the validity of the developed system, operations of the robot in the field area were illustrated.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.35-40
• /
• 1998

A nonlinear attitude model of a satellite with thrusters, magnetic torquers and a reaction wheel cluster is developed. Then the linearized version of this satellite attitude model is derived far the attitude hold mode. For comparison purpose, various control methods are considered for attitude control of a satellite. We consider a proportional derivative controller which is actually used in the remote sensing satellite, KOMPSAT. Then a comparison is made with an H$_2$controller, an H$\sub$$\infty$/ controller, and a mixed H$_2$/ H$\sub$$\infty$/ controller. The analysis and numerical studies show that the proportional derivative controller's performance is limited in the sense that the pitch angle cannot approach zero. The simulations also show that among three control methods (H$_2$control, H$\sub$$\infty$/ control, and mixed H$_2$/ H$\sub$$\infty$/ control) H$_2$control has the fastest response time, H$\sub$$\infty$/ control has the slowest and mixed H$_2$/ H$\sub$$\infty$/ control comes in between the first two control methods. On the other hand, H$\sub$$\infty$/ control used least amount of control effort while H$_2$control required the most.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1125-1131
• /
• 2012

According to abrupt decrese in number of farmer and ageing society, there has been a need for development of low cost agricultural robot. In this paper, a H/W and S/W platform of caterpillar type agricultural chemical dusting robot based on XP embedded system were described. The developed agricultural robot has 2 d.o.f caterpillar type driving wheel and 2 d.o.f chemical dusting spray mechanical system. The H/W platform of the agricultural robot consists of robot controller, remote controller and sensor controller. In S/W platform, 5 processes work concurrently, which are task manager, TCP-IP communication process, localization process, wheel control, and sensor control process. This robot platform has been developed for chemical dusting robot. We proved this system's validity through field test.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.4
• /
• pp.281-287
• /
• 2002

This paper investigates on the feasibility of fuzzy logic control for networked control systems. In order to evaluate its feasibility, a networked control system for motor speed control is implemented on a Profibus-DP network. The NCS consists of several inde-pendent, but interacting processes running on two separate stations. By using this NCS, the network-induced delay is analyzed to find the cause and effect of the delay. Furthermore, in order to prove the feasibility, the fuzzy logic controller's performance is compared with those of conventional PID controllers. Based on the experimental results, the fuzzy logic controller can be a viable choice far NCS due to its robustness against parameter uncertainty.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.233-236
• /
• 2003

In this paper, we implement embedded Linux intelligent controller for remote monitoring system. Embedded controller as the hard core is consisted of 32 bit CPU and is designed to have processing of real time monitoring and FFT. The prototype monitoring system can operate with world wide web in GUI environment by java. Detailed design and functional analysis for monitoring system are performed by systems approach.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1997-1998
• /
• 2006

In this paper, we propose a remote control system which is used by internet network system in the small water booster supply. So far, TMTC(Tele Metering Tele Control) has been used to control and monitor small water booster pump. But it is possible and easy to control and observe local booster panel with the rapid development of internet, This new system is to provide operators and managers with sufficient information and control in order to implement the operation in an efficient and economical way. This system consists of three parts that are controller, netpump server and netview client. Controller has a dual architecture. The motive for installing controller is the continuous production and supply of drinking water.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.526-531
• /
• 2003

In this paper, we implement embedded Linux intelligent controller and remote monitoring system for Bridge Diagnosis. Embedded controller as the hard core is consisted of 32 bit CPU and is designed to have processing of real time monitoring and FFT for Bridge Diagnosis. The prototype monitoring system can operate with world wide web in GUI environment by Java. Detailed design and functional analysis for monitoring system are performed by systems approach.