• 제목/요약/키워드: Remote Condition System

검색결과 265건 처리시간 0.027초

제어용 계전기의 원격감시시스템 구현 (An Implementation of Remote Monitoring System for Control Relay)

  • 장용훈;남재현
    • 한국정보통신학회논문지
    • /
    • 제20권11호
    • /
    • pp.2100-2106
    • /
    • 2016
  • 자동화시스템은 PLC를 사용하여 생산제품의 제조 공정상태를 감시하고 센서에서 전달되는 센서정보를 처리한다. 본 연구에서는 자동화시스템에 사용되고 있는 제어용 계전기의 상태를 감시하는 원격감시시스템을 제안한다. 제안한 시스템은 제어 릴레이모듈, 원칩프로세서 모듈, 컴퓨터 모니터링시스템과 제어용 계전기의 내역을 입력하고 관리하는 데이터베이스시스템으로 구성한다. 컴퓨터 모니터링시스템은 제어용 계전기의 작동상태와 수명을 모터링할 수 있도록 구성하였고, 데이터베이스는 제어용 계전기의 투입 일자를 입력하고 수정이 가능하게 구성하였으며, 제어용 계전기의 작동상태의 정보를 자동으로 프린트할 수 있도록 구성하였다. 원격감시시스템에서 제어용 계전기의 고장상태를 실시간으로 파악하고, 고장부품을 신속하게 교체하여 정상가동에 소요되는 시간을 최소화할 수 있도록 하였다.

무인화등대 항로표지 원격제어설비 구축 및 회전식등명기 RTU 프로토콜 표준화 방안 (Establishment of Remote Control Facility for Unmanned Lighthouse Route Mark and Standardization of Rotary Lantern RTU Protocol)

  • 김현준
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2019년도 추계학술대회
    • /
    • pp.59-61
    • /
    • 2019
  • 유인등대 무인화 구축에 있어 효율적인 관리와 운영을 위해 표준화된 시스템 구축이 필요하며, 등대의 역할 중 가장 중요한 등명기에 대해 회전식 등명기를 효율적으로 관리운영시스템으로 관리하기 위해 상태 감시 및 제어를 위한 RTU 표준 프로토콜을 제정하여 효율적인 관리를 통해 해상교통안전에 만전을 기하고자 한다.

  • PDF

공기 압축기의 원격 감시제어시스템 개발 (A Development of Remote Supervisory Controlling System of Air Compressor)

  • 최승현;강대규;이성근;김윤식;박영산
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 1999년도 추계종합학술대회
    • /
    • pp.482-485
    • /
    • 1999
  • 본 논문에서는 80196KC 마이크로프로세서에 의해 제어되는 공기압축기의 원격감시제어시스템을 제안한다. 제안된 모니터링시스템에서는 RS-232 직렬 통신에 의해 원거리에서 운전되는 공기압축기를 조작하고, 그 운전 상태에 대한 데이터 확인 및 이상유무를 감시한다. 단상유도전동기에 의해 구동되는 공기압축기 시스템을 대상으로 실험한 결과 그 타당성을 확인하였다.

  • PDF

Integrated GUI Environment of Parallel Fuzzy Inference System for Pattern Classification of Remote Sensing Images

  • Lee, Seong-Hoon;Lee, Sang-Gu;Son, Ki-Sung;Kim, Jong-Hyuk;Lee, Byung-Kwon
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • 제2권2호
    • /
    • pp.133-138
    • /
    • 2002
  • In this paper, we propose an integrated GUI environment of parallel fuzzy inference system fur pattern classification of remote sensing data. In this, as 4 fuzzy variables in condition part and 104 fuzzy rules are used, a real time and parallel approach is required. For frost fuzzy computation, we use the scan line conversion algorithm to convert lines of each fuzzy linguistic term to the closest integer pixels. We design 4 fuzzy processor unit to be operated in parallel by using FPGA. As a GUI environment, PCI transmission, image data pre-processing, integer pixel mapping and fuzzy membership tuning are considered. This system can be used in a pattern classification system requiring a rapid inference time in a real-time.

Adaptive Reconstruction of Harmonic Time Series Using Point-Jacobian Iteration MAP Estimation and Dynamic Compositing: Simulation Study

  • Lee, Sang-Hoon
    • 대한원격탐사학회지
    • /
    • 제24권1호
    • /
    • pp.79-89
    • /
    • 2008
  • Irregular temporal sampling is a common feature of geophysical and biological time series in remote sensing. This study proposes an on-line system for reconstructing observation image series contaminated by noises resulted from mechanical problems or sensing environmental condition. There is also a high likelihood that during the data acquisition periods the target site corresponding to any given pixel may be covered by fog or cloud, thereby resulting in bad or missing observation. The surface parameters associated with the land are usually dependent on the climate, and many physical processes that are displayed in the image sensed from the land then exhibit temporal variation with seasonal periodicity. A feedback system proposed in this study reconstructs a sequence of images remotely sensed from the land surface having the physical processes with seasonal periodicity. The harmonic model is used to track seasonal variation through time, and a Gibbs random field (GRF) is used to represent the spatial dependency of digital image processes. The experimental results of this simulation study show the potentiality of the proposed system to reconstruct the image series observed by imperfect sensing technology from the environment which are frequently influenced by bad weather. This study provides fundamental information on the elements of the proposed system for right usage in application.

Hydrologic Impact Assessment of land Cover Changes by 2002 Typhoon RUSA Using Landsat Images and Storm Runoff Model

  • Lee, Mi-Seon;Park, Geun-Ae;Kim, Seong-Joon
    • 대한원격탐사학회지
    • /
    • 제22권5호
    • /
    • pp.407-413
    • /
    • 2006
  • To investigate the streamflow impact of land cover changes by a typhoon, HEC-l storm runoff model was applied by using land cover information before and after the typhoon. The model was calibrated with three storm events of 1985 to 1988 based on 1985 land cover condition for a $192.7km^{2}$ watershed in northeast coast of South Korea. After the model was tested, it was run to estimate impacts of land cover change by the typhoon RUSA occurred in 2002 (31 August-1 September) with 897.5 mm rainfall. The land covers before and after the typhoon were prepared using Landsat 7 ETM+ of September 11 of 2000 and Landsat 5 TM of September 29 of 2002 respectively. For the $6.9km^{2}$ damaged area (3.6 % of the watershed), the peak runoff and total runoff by the changed land cover condition increased 12.5 % and 12.7 % for 50 years rainfall frequency and 1.4 % and 1.8 % for 500 years rainfall frequency respectively based on AMC (Antecedent Moisture Condition)-I condition.

콘크리트 표면절삭 장비의 품질관리를 위한 머신비전 알고리즘 개발 (A Study of the Machine Vision Algorithm for Quality Control of Concrete Surface Grinding Equipment)

  • 김정환;서종원;송순호;이원식
    • 한국건설관리학회:학술대회논문집
    • /
    • 한국건설관리학회 2007년도 정기학술발표대회 논문집
    • /
    • pp.983-986
    • /
    • 2007
  • 콘크리트 표면절삭 작업은 콘크리트 표면의 평탄성 및 부착성을 필요로 하는 공사에서 빈번히 사용되고 있으나 작업형태가 노동집약적이며, 유해한 작업환경을 보유하고 있다. 또한 장비를 다루는 기능공의 숙련도에 따라 생산성 및 절삭품질의 편차가 큰 경향이 있다. 그러므로 주변 환경오염 방지와 장비 조종자가 위험에 노출되지 않도록 하기 위한 원격조종 콘크리트 표면절삭 장비 개발이 요구된다. 그러나 원격 조종 시스템에서 조종자가 절삭면의 품질을 측정하기 난해하고 품질에 대한 객관적인 판단을 내리기가 어려우므로, 본 연구에서는 머신비젼시스템(Machine Vision System)을 적용하여 네트워크 카메라로 촬영한 절삭면의 이미지를 디지털 영상처리(Image Processing)과정을 거쳐 그 결과를 그래픽 MMI(Man-Machine Interface) 프로그램에 표현함으로써 품질관리 시스템을 구축하였다. 머신비전 알고리즘은 콘크리트 절삭면의 디지털 영상처리 알고리즘을 의미하며 본 논문에서 제안된 알고리즘을 적용하여 콘크리트 절삭면의 객관적인 품질관리 기준을 제시하고자 한다.

  • PDF

지리정보시스템(GIS)을 이용한 경산시의 토지잠재력 분석 (A Land Capability Analysis in Kyungsan, Korea Using Geographic Information System)

  • 오정학;정성관
    • 한국조경학회지
    • /
    • 제26권3호
    • /
    • pp.34-44
    • /
    • 1998
  • The purpose of this study is to provide the basic data for land use in the future, which result from analyzing land use, obtained after studying on the natural environment by Geographic Information System and Remote Sensing. The results of this study are as follows : ·According to the classification of land-cover, agricultural land use is relatively prominent except for overall natural covering. According to the average value of Green Vegetation Index class, the average value of GVI is 3.0, and 45% of the regions have relatively good condition of floral state. ·With a view to natural environment, the survey shows that the altitude of 90% of the total areas is below 400m, and most of them are flattened or moderately-inclined area. Therefore, this region has a good condition to be used for development. · The area for the first class in preservation degree of natural scenery of Namcheon-Myun is 2.3% of the total areas. According to the results about unstable areas on all sides, unstable districs are distributed in so small-scale units that they will be safe from some damages drawn by developing activity. But we have to consider every aspects for the future development of them. In this study, the natural environment-variables are regarded firstly, and effective designation of the land with natural environment is researched too. However, to establish more practical developing plan, ecological and human variables should be regarded.

  • PDF

Aerosol radiative forcing estimated from ground-based sky radiation measurements over East Asia

  • Kim, Do-Hyeong;Sohn, B.J.;Nakajima, T.;Okada, I.;Takamura, T.
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.12-16
    • /
    • 2002
  • The clear sky radiative forcings of aerosols were evaluated over East Asia. We first investigated optical characteristics of aerosol using sky radiation measurements. An algorithm of Nakajima et al. (1996) is used for retrieving aerosol parameters such as optical thickness, ${\AA}$ngstr$\"{O}$m exponent, single scattering albedo, and size distribution from sky-radiation measurements, which then can be used for examining spatial and temporal variations of aerosol. Obtaining aerosol radiative forcing at TOA and surface, a radiative transfer model is used with inputs of obtained aerosol parameters and GMS-5 satellite-based cloud optical properties. Results show that there is a good agreement of simulated downwelling radiative flux at the surface with observation within 10 W m$^{-2}$ rms errors under the clear sky condition. However, a relatively large difference up to 40 W m$^{-2}$ rms error is found under the cloudy sky condition. The computed aerosol radiative forcing at the surface shows downward flux changes ranging from -100 to -170 W m$^{-2}$ per unit aerosol optical thickness at 0.7 $\mu$m. The different values of aerosol radiative forcing among the stations is mainly due to the differences in single scattering albedo ($\omega$$_{0.7}$) and asymmetric parameter (g$_1$) related to the geographical and seasonal variations.

  • PDF

네트워크를 이용한 온실 감시 시스템의 개발 (Development of a Greenhouse Monitoring System Using Network)

  • 임정호;류관희;진제용
    • Journal of Biosystems Engineering
    • /
    • 제28권1호
    • /
    • pp.53-58
    • /
    • 2003
  • This study was carried out to design, construct, and test a greenhouse monitoring system fur the environment and status of control devices in a greenhouse from a remote site using internet. The measuring items selected out of many environmental factors were temperature, humidity, solar radiation, CO$_2$, SOx, NOx concentration, EC, pH of nutrient solution, the state of control devices, and the image of greenhouse. The developed greenhouse monitoring system was composed of the network system and the measuring module. The network system consists of the three kinds of monitors named the Croup Monitor. the Client Monitor and the Server Monitor. The results of the study are summarized as follows. 1. The measuring module named the House Monitor. which is used to watch the state of the control device and the environment of the greenhouse, was developed to a embedded monitoring module using one chip microprocessor 2. For all measuring items. the House Monitor showed a satisfactory accuracy within the range of ${\pm}$0.3%FS. The House Monitors were connected to the Croup Monitor by communication method of RS-485 type and could operate under power and communication fault condition within 10 hours. The Croup Monitor was developed to receive and display measurement data received from the House Monitors and to control the greenhouse environmental devices. 3. The images of the plants inside greenhouse were captured by PC camera and sent to the Group Monitor. The greenhouse manager was able to monitor the growth state of plants inside greenhouse without visiting individual greenhouses. 4. Remote monitoring the greenhouse environment and status of control devices was implemented in a client/server environment. The client monitor of the greenhouse manager at a remote site or other greenhouse manager was able to monitor the greenhouse environment and the state of control devices from the Server Monitor using internet.