• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.245-246
• /
• 2012

Lately the Infill Modular Construction System which meets the domestic standards about the structure and fireproof performance and which is applied to the remodeling techniques is being emphasized. In order to introduce the Infill Modular Construction System to domestic market successfully, the development of insufficient element technologies and systematic analysis of process should be preceded. This research aims to establish of Standard Construction Process, as advanced research for the settlement of the Infill Modular Construction System. As advanced research for the activation of the Infill Modular Construction System, this research aims to develop Infill Unit Module's mobile device. This is expected to improve work efficiency. In addition organizing optimized Standard Construction Process by steady work analysis and improvement is being planned.

• Journal of Korean Neurosurgical Society
• /
• v.49 no.6
• /
• pp.317-322
• /
• 2011

The prevalence of osteoporosis has been increasing globally. Recently surgical indications for elderly patients with osteoporosis have been increasing. However, only few strategies are available for osteoporotic patients who need spinal fusion. Osteoporosis is a result of negative bone remodeling from enhanced function of the osteoclasts. Because bone formation is the result of coupling between osteoblasts and osteoclasts, anti-resorptive agents that induce osteoclast apoptosis may not be effective in spinal fusion surgery, necessitating new bone formation. Therefore, anabolic agents may be more suitable for osteoporotic patients who undergo spinal fusion surgery. The instrumentations and techniques with increased pullout strength may increase fusion rate through rigid fixation. Studies on new osteoinductive materials, methods to increase osteogenic cells, strengthened and biocompatible osteoconductive scaffolds are necessary to enable osteoporotic patients to undergo spinal fusion. When osteoporotic patients undergo spinal fusion, surgeons should consider appropriate osteoporosis medication, instrumentation and technique.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1455-1457
• /
• 2008

Cell adhesion is a coordinated process involving initial binding of integrin receptors to extracellular matrix (ECM), recruitment of adhesion proteins, and focal adhesion assembly. The formation of mechanically stable focal adhesion assembly of cells within surrounding ECM is a key parameter to direct numerous cellular functions including cell migration, differentiation, and apotosis. With current cell adhesion assays, it is difficult to understand contributions of each coordinated event on evolution of cell adhesion strengthening since cells spontaneously spread upon their adhesion to the substrate, thus remodeling their cytoskeletal structure. In this presentation, novel approaches for analysis of cell adhesion strengthening process based on the combination of mechanical device, micro-patterned substrates, and molecular biological techniques will be discussed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.37
• /
• pp.6.1-6.9
• /
• 2015

Orthognathic surgery requires stable fixation for uneventful healing of osteotomized bony segments and optimal remodeling. Titanium plates and screws have been accepted as the gold standard for rigid fixation in orthognathic surgery. Although titanium osteofixation is the most widely used approach, the use of bioabsorbable devices has been increasing recently. Biodegradation of bioabsorbable devices eliminates the need for a second operation to remove metal plates and screws. However, long-term stability and relapse frequency in bioabsorbable osteofixation are still insufficiently studied, especially in cases of segmental movements of great magnitude or segmental movements to a position where bony resistance exists. This paper reviews the background, techniques, and complications of bioabsorbable osteofixation and compares bioabsorbable and titanium osteofixation in orthognathic surgery in terms of skeletal stability.

• Archives of Craniofacial Surgery
• /
• v.9 no.2
• /
• pp.85-89
• /
• 2008

Purpose: Unicoronal synostosis is the craniofacial anomaly caused by premature fusion of unilateral coronal suture. Ipsilateral flattening of the frontal and parietal bones, temporal retrusion with elevation and recession of the supraorbital rim are main clinical features. Compensatory contralateral frontal bossing and deviation of the nasal root and/or chin can also occur. There is a controversy about techniques for surgical correction, however, bilateral approach technique is more effective for correction of deformity. Methods: A 4-year-old patient with unicoronal synostosis had undergone unilateral suturectomy at 28-month-old but fronto-facial deformity had remained and aggravated as she grew older. She had both fronto-facial and endocranial asymmetry. We performed coronal cranial approach and fully exposed affected cranium including supraorbital rim. Anterior 2/3 calvarial reconstruction with bilateral frontal bone osteotomy and fronto-orbital bandeau advancement was performed. Results: Fronto-facial symmetry including fronto-orbital contour, nasal devation was improved. Endocranial twisting was also improved from $158^{\circ}$ to $162^{\circ}$ in CSO(crista gallisella turcica-opisthion) degree. There was no postoperative complications and no need for revision, and facial asymmetry improved at the period of 2 years of follow-up. Conclusion: Bilateral approach with fronto-orbital bandeau remodeling in surgery of unicoronal synostosis looked superior to unilateral approach in achieving better symmetry and preventing recurrence of asymmetry. Remodeling surgery should be tried in patients even at an older age to correct fronto-facial asymmetry.

• Medical Lasers
• /
• v.8 no.1
• /
• pp.13-18
• /
• 2019

Background and Objectives High-intensity focused ultrasound (HIFU) can produce small zones of thermal damage. A HIFU procedure is non-invasive and it can achieve rejuvenation of facial skin. Fractional CO₂ laser resurfacing delivers thermal damage to the pixilated columnar zone of the skin and so evoke collagen remodeling, the same as HIFU. In many cases, the patients who want rejuvenation with HIFU are also good candidates for cutaneous photorejuvenation such as can be accomplished via fractional CO₂ resurfacing. If patients are treated in a single session by remodeling both the superficial and deep compartments of skin by using both modalities, then improvement in rhytides and tightening of sagging skin will optimize the aesthetic result. Materials and Methods Between May 2014 and January 2018, a total of 44 patients were treated with combination HIFU and fractional CO₂ laser resurfacing according to our protocol. First, the HIFU was applied to the entire face with an average of 300 treatment lines. Immediately after HIFU treatment, the ultrasound gel was washed off and then fractional CO₂ laser resurfacing was performed. We evaluated the patients using 4-point grading scales. The clinician examined the skin for evidence of complications after the completion of treatment. Results All the patients' skin quality showed improvement. Further. the clinical results after duel modality treatment were substantially better than that after the use of either modality alone. The recovery times and the incidence of adverse events when quickly and consecutively performing both treatments were similar as compared to those with employing stepwise treatment. We encountered no complications whatsoever. Conclusion When compared with stepwise therapy, combination therapy with HIFU and fractional CO₂ resurfacing offers better, safer and more effective clinical results. Thus, for targeting multiple layers of aging facial skin, this combination therapy can be safely performed in a single treatment session.

• Archives of Plastic Surgery
• /
• v.43 no.1
• /
• pp.3-9
• /
• 2016

The reconstruction of the mandible is a complex procedure because various cosmetic as well as functional challenges must be addressed, including mastication and oral competence. Many surgical techniques have been described to address these challenges, including non-vascularized bone grafts, vascularized bone grafts, and approaches related to tissue engineering. This review summarizes different modifications of the free vascularized fibula graft, which, since its introduction by Hidalgo in 1989, has become the first option for mandibular reconstruction. The fibula free flap can undergo various modifications according to the individual requirements of a particular reconstruction. Osteocutaneous flaps can be harvested for reconstruction of composite defects. 'Double-barreling' of the fibula can, for instance, enable enhanced aesthetic and functional results, as well as immediate one-stage osseointegrated dental implantation. Recently described preoperative virtual surgery planning to facilitate neomandible remodeling could guarantee good results. To conclude, the free fibula bone graft can currently be regarded as the "gold standard" for mandibular reconstruction in case of composite (inside and outside) oral cavity defects as well as a way of enabling the performance of one-stage dental implantation.

• Clinical and Experimental Pediatrics
• /
• v.56 no.3
• /
• pp.101-106
• /
• 2013

Despite developments in surgical techniques and other interventions, right ventricular (RV) failure remains an important clinical problem in several congenital heart diseases (CHD). RV function is one of the most important predictors of mortality and morbidity in patients with CHD. RV failure is a progressive disorder that begins with myocardial injury or stress, neurohormonal activation, cytokine activation, altered gene expression, and ventricular remodeling. Pressure-overload RV failure caused by RV outflow tract obstruction after total correction of tetralogy of Fallot, pulmonary stenosis, atrial switch operation for transposition of the great arteries, congenitally corrected transposition of the great arteries, and systemic RV failure after the Fontan operation. Volume-overload RV failure may be caused by atrial septal defect, pulmonary regurgitation, or tricuspid regurgitation. Although the measurement of RV function is difficult because of many reasons, the right ventricle can be evaluated using both imaging and functional modalities. In clinical practice, echocardiography is the primary mode for the evaluation of RV structure and function. Cardiac magnetic resonance imaging is increasingly used for evaluating RV structure and function. A comprehensive evaluation of RV function may lead to early and optimal management of RV failure in patients with CHD.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.6
• /
• pp.440-449
• /
• 2008

This paper deals with a method calculating various hull form parameters which are required in numerical analysis for ship performance such as motion, maneuverability, resistance and propulsion, etc. After the hull form is designed, before the model tests the ship's performances are evaluated by various analysis tools in which the hull form parameters are used with many kinds of forms aside from offset data. Here, The hull form parameters characterize the properties of hull form and contain positional, differential and integral information implicitly. Generally, the commercial CAD-system has not functions enough for supporting these form parameters and therefore each shipyard uses its own in-house analysis program as well as commercial analysis software. To overcome these limitations, modules for supporting these analysis programs have developed. The modules contain cubic composite spline cure using local curve fairing, intersect algorithm, Gaussian integral, and other geometric techniques needed in calculating hull form parameters. Using our analysis-supporting modules, a complex hull form can be remodeled exactly to the hull form designed by CAD-system and any hull form parameter required in various performance analyses can be calculated.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.81-87
• /
• 2001

In a dynamically changing environment, the manager of a maintenance and remodeling (M/R) program is confronted with an increasing complexity of coordinating and cooperating multi-resource constrained multiple projects. The root causes of the complexity, uncertainty and interdependence, cause an internal disruption of an activity and chain reactions of disturbance propagation that deteriorate the stability and manageability of the program. This paper evaluates previous endeavors to apply production control and management techniques to the construction industry, and investigates the possibility of applying other management concepts and theories to organizational program management. In particular, this paper proposes a buffer allocation model by which periodic buffers are allocated in the flows of program constraint resources to stabilize a program master schedule instead of protecting individual activities. Comparative experiments by Monte Carlo simulations illustrate improved performance of the proposed model in terms of program's goals: productivity, flexibility, and long-term stability.