• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2005.11a
• /
• pp.125-128
• /
• 2005

Even though the life of a building fully remains, early complete withdrawal re-construction is carried out because of internal components fashioned. However, remodelling is activated by legal recently and the remodeling technology is increasing for sustainable development. This study grasp the internal components remodeling technology of Korea, America and Japan through analysis of patents so as to find out the proper direction of remodelling technology of internal components.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2005.11a
• /
• pp.129-132
• /
• 2005

Recently, Domestic construction industry is confronted with a new phase by increasement of stock and elation of the concern about environment. In particular, the focus on remodeling as an altanative of the reconstruction system that squanders resources and creates massive construction waste, has increased. However, current remodeling methods are being obstructed factor, because design has not considered the remodeling at the beginning of the construction. The purpose of this study is to search for the improvement of component joint for efficient remodeling. Field survey is conducted on the components grouped by spaces(living room/bed room/kitchen/bathroom) of unit living at 6 construction sites in Seoul & countries. As a result, total 228 component joints are selected and classified according to interface condition and problem pattern.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.366-369
• /
• 2006

Multi Housing design has not considered the remodeling even at the beginning of the construction. This severely hindered systematic maintenance, providing fundamental causes of consuming society. In general, in about 20 years when the buildings become too old, they are brought down or removed with a trail of waste left behind. In addition, since the current remodeling or future remodeling type is a general remodeling that leaves only a frame, some question the role of the remodeling as a solution to the reconstruction from economically and environmentally efficient aspects. This study intends to find a solution for long-life span multi-family housing design, promoting sequential remodeling by stating the life cycle of components. Problems were identified by analyzing joints, design and construction of multi-family housing based on the previous researches. Conclusion from characterization of the design plan according to joint parts can be summarized as the following firstly, the problem of the wet was seen in joints between the structure and a finishing materials and ones between separate finishing materials. Secondly, the problem of overlap was frequently seen in joints between the structure and a door/window, ones between a door/window and a finishing materials, and ones between a finishing materials and an electrical/mechanical device.

• Journal of the Korean Institute of Educational Facilities
• /
• v.10 no.5
• /
• pp.15-22
• /
• 2003

Deterioration of the educational facilities built before 1985 is a serious situation. The purpose of this study is to present the efficient remodeling method of old educational facilities. This paper, part II, presents the systemic and synthetic judgment method of deterioration grade of structural components. Deterioration grade of the whole structural components are judged by synthetic evaluation score which is the total of the score of ten evaluation items. And we added the importance coefficient of the viewpoint of four performance to each evaluation item.

• Journal of Korean Society of Rural Planning
• /
• v.18 no.3
• /
• pp.111-122
• /
• 2012

This study is to evaluate the classification system of rural-villages remodeling components which is provided for improving the quality of life for rural community by improvement of settlement environment. To achieve this, rural-villages remodeling components are classified according to the spatial structure of rural area through analysis of literature, then we have examined the applicability through case studies after modification work which is based on experts's discussion and rearrangement by pilot investigation of researcher. In the classification system of rural-villages remodeling classified productivity area, residential area, community area in first group and this classification is divided into 6 space to production, 4 space to residence, 5 space to community in second group by literature search, pilot investigation of researcher and field survey. The subject elements surveyed a total of 123 through the literature search, additionally, 1 element at a space to production and space to community in field survey for types in zoning cases. As a result, categories and items are decided that it is included 125 target elements.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.370-373
• /
• 2006

Lastly, the problem of filling occurs in the process of concealed joint of adjacent components and was seen in joints between the structure and an electrical or mechanical device. Therefore, the dry processing which replaces wet joint was seen in joints between the structure and a door, ones between the structure and a finishing materials, ones between a gypsum board and electrical device, and ones between a water pipe and a tile finishing. And a process of separating the area of jointed parts in order to eliminate the problem of overlap was seen in joints between a door and a finishing material and ones between a gypsum board on the ceiling and a light. Lastly, an analysis of a process of exposing concealed parts indicated that the problem of filling could be applied to joints between the structure and an electrical or mechanical device and ones between a finishing material and a mechanical device. This study sought out methods to apply Environment Friendly Multi Housing Remodeling that allow easy remodeling as part of environment- preserving policies. It also contains basic data useful to implement long-life houses in the future by presenting a comprehensive design standard for them

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.530-533
• /
• 2006

This thesis investigates the behavior of precast wall systems with a new vertical connection which are proportioned by the displacement based design. The proposed precast wall systems are supposed to provide additional spaces and seismic strengthening in remodeling existing residential buildings. For a fast remodeling constructions using PC walls require an efficient, economic fabrication method. A C-type vertical connections for PC wall systems is proposed for transfer of bending moment between walls in the vertical direction while a shear key in the center of wall is prepared to transfer shear forces by bearing. The proposed vertical connection allows us easy fabrication because of different direction of slots at the edges of wall. The dimension of C-type connection components are determined by engineering models and a series of test.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3043-3051
• /
• 2016

Controlled remodeling of the extracellular matrix (ECM) is essential for cell growth, invasion and metastasis. Matrix metalloproteinases (MMPs) are a family of secreted, zinc-dependent endopeptidases capable of degradation of ECM components. The expression and activity of MMPs in a variety of human cancers have been intensively studied. They play important roles at different steps of malignant tumor formation and have central significance in embryogenesis, tissue remodeling, inflammation, angiogenesis and metastasis. However, increasing evidence demonstrates that MMPs are involved earlier in tumorigenesis. Recent studies also suggest that MMPs play complex roles in tumor progression. MMPs and membrane type (MT)-MMPs are potentially significant therapeutic targets in many cancers, so that designing of specific MMP inhibitors would be helpful for clinical trials. Here, we review the pleiotropic roles of the MMP system in hematological malignancies in-vitro and in-vivo models.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.217-224
• /
• 2006

This thesis investigates the behavior of precast wall systems with a new vertical connection which are proportioned by the displacement based design. The proposed precast wall systems are supposed to provide additional spaces and seismic strengthening in remodeling existing residential buildings. For a fast remodeling constructions using PC wails require an efficient, economic fabrication method. A C-type vertical connections for PC wall systems is proposed for transfer of bending moment between walls in the vertical direction while a shear key in the center of wall is prepared to transfer shear forces by bearing. The proposed vertical connection allows us easy fabrication because of different direction of slots at the edges of wall. The dimension of C-type connection components are determined by engineering models and a series of test.

• Applied Microscopy
• /
• v.29 no.2
• /
• pp.201-209
• /
• 1999

Remodeling of epithelial cells during wound healing in the skin of the Korean fire-bellied toad, Bombina orientalis, were examined using the scanning and transmission electron microscopical analyses. Artificial wounds were induced on the dorsal surface of the skin by excision, and reared in special cages with normal diets for up to 31 days after injury. From 4 days after wounding, regenerated epithelial cells are more rapidly migrated to wounding area, and remodeling of tissue components are proceeded gradually. Especially, formation of basal lamina between regenerated epithelium and dermis, and reconstruction of cellular junctions such as desmosomes (among the regenerated epithelial cells) and hemidesmosomes (between basal epithelial cells and basal lamina) are detected through fine structural analysis from 10 days after injury. Parakeratosis of regenerated epithelial cells observed during 16 to 19 days after wounding.