• Structural Engineering and Mechanics
• /
• v.70 no.1
• /
• pp.67-80
• /
• 2019

Strengthening with near surface mounted carbon fibre reinforced polymers (NSM-CFRP) is a strengthening technique that have been used for several decades to increase the load carrying capacity of reinforced concrete members. In Iraq, many concrete buildings and bridges were subjected to a wide range of damage as a result of the last war and many other events. Accordingly, there is a progressive increase in the strengthening of concrete structures, bridges in particular, by using CFRP strengthening techniques. Near-surface mounted carbon fibre polymer has been recently proved as a powerful strengthening technique in which the CFRP strips are sufficiently protected against external environmental conditions especially the high-temperature rates in Iraq. However, this technique has not been examined yet under repeated loading conditions such as traffic loads on bridge girders. The main objective of this research was to investigate the effectiveness of NSM-CFRP strips in reinforced concrete beams under repeated loads. Different parameters such as the number of strips, groove size, and two types of bonding materials (epoxy resin and cement-based adhesive) were considered. Fifteen NSM-CFRP strengthened beams were tested under concentrated monotonic and repeated loadings. Three beams were non-strengthened as reference specimens while the remaining were strengthened with NSM-CFRP strips and divided into three groups. Each group comprises two beams tested under monotonic loads and used as control for those tested under repeated loads in the same group. The experimental results are discussed in terms of load-deflection behavior up to failure, ductility factor, cumulative energy absorption, number of cycles to failure, and the mode of failure. The test results proved that strengthening with NSM-CFRP strips increased both the flexural strength and stiffness of the tested beams. An increase in load carrying capacity was obtained in a range of (1.47 to 4.49) times that for the non-strengthened specimens. Also, the increase in total area of CFRPs showed a slight increase in flexural capacity of (1.02) times the value of the control strengthened one tested under repeated loading. Increasing the total area of CFRP strips resulted in a reduction in ductility factor reached to (0.71) while the cumulative energy absorption increased by (1.22) times the values of the strengthened reference specimens tested under repeated loading. Moreover, the replacement of epoxy resin with cement-based adhesive as a bonding material exhibited higher ductility than specimen with epoxy resin tested under monotonic and repeated loading.

• Journal of Oral Medicine and Pain
• /
• v.48 no.3
• /
• pp.87-95
• /
• 2023

Purpose: To quantify the relationship between perceived pain intensity and psychological variables in a sample of participants with temporomandibular disorder, with or without central sensitization (CS). Methods: A cross-sectional study with nonprobability convenience sampling was conducted from January 1, 2022, to June 30, 2023. Pain intensity (Numeric Pain Rating Scale), anxiety (State-Trait Anxiety Questionnaire, STAI), catastrophizing (Pain Catastrophizing Scale, PCS), perceived stress (Perceived Stress Scale, PSS), and sleep quality (Pittsburgh Sleep Quality Index, PSQI) were assessed. Statistical analysis was performed using IBM SPSS Statistics for Windows, Version 20.0 (IBM Co.), which included descriptive and normality analyses and the calculation of strength of multiple correlational regression. Results: A total of 52 (n=34 female 65.4%; n=18 male 34.6%) subjects with diagnosis of temporomandibular disorders (TMD) were finally included. A total of 26 participants (n=26, 50.0%) were cases suffered from CS (TMD-CS mean=46.62±11.24) while the remaining participants (n=26, 50.0%) were the controls (TMD-nCS mean=26.77, standard deviation [SD]=8.42). The pain intensity was moderate in both groups TMDCS (mean=7.62, SD=0.83) and TMD-nCS (mean=7.05, SD=0.86), anxiety (TMD-CS STAI mean=53.27, SD=11.54; TMD-nCS STAI mean=49, SD=11.55), catastrophizing (TMD-CS PCS mean=46.27, SD=9.75; TMD-nCS PCS mean=26.69, SD=4.97), perceived stress (TMDCS PSS mean=30.35, SD=4.91; TMD-nCS PSS mean=26.12, SD=6.60) and sleep quality (TMD-CS PSQI mean=15.81, SD=3.65; TMD-nCS PSQI mean=12.77, SD=2.76) levels were measured in both groups. In TMD-CS and TMD-nCS, higher anxiety levels were moderately and significantly associated with greater pain intensity β=0.4467 (t=2.477, p=0.021) and β=0.5087 (t=2.672, p=0.014). Nevertheless, catastrophizing, perceived stress and sleep quality were not associated to pain intensity in neither of group. Conclusions: In both TMD-CS and TMD-nCS patients, elevated anxiety levels were moderately and significantly associated with increased pain intensity. However, heightened levels of pain catastrophizing, perceived stress, and poor sleep quality were not significantly associated with increased pain intensity in either of the two analyzed groups.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.3
• /
• pp.223-242
• /
• 2024

Single-shell tunnels, introduced to South Korea in the early 2000s, have not been adopted for the main tunnels of roads or railways over the past two decades despite several attempts starting with the Gwangju City Bypass. This reluctance likely arises from concerns about the long-term performance of supporting materials and the absence of relevant criteria and specifications. However, recent progress, including the incorporation of high-strength shotcrete standards and corrosion-resistant rock bolt specifications, alongside equipment and technique enhancements, necessitates a reassessment of single-shell tunnels. While the single-shell tunnel method offers advantages in environmental impact, construction cost and period compared to the conventional NATM, it is crucial to address the challenges, such as limited design and construction experience, incomplete detailed standards, and insufficient construction specifications, through further research and pilot projects. This paper reviewed the basic principles of single-shell tunnel, current application and research status, technical development trends, criteria and specifications, and remaining challenges. It aims to reignite discussions on the feasibility of applying single-shell tunnels in South Korea.

• Journal of Animal Science and Technology
• /
• v.52 no.5
• /
• pp.389-398
• /
• 2010

The objective of this study was to investigate the effects of three strains of Bacillus subtilis (B. subtilis) supplemented to diets on egg production, egg quality, egg yolk cholesterol levels, the profile of cecal microflora, and tibia characteristics in laying hens. One hundred sixty 76-week-old Hy-Line Brown layers were randomly divided into 4 groups with 4 replicates per group (10 birds per replicate). Birds in the control group were fed a corn-soybean meal based diet. The remaining three treated groups were fed the control diet containing either 0.05% B. subtilis Ch3 (T1), 0.05% B. subtilis Ch3 + B. subtilis W1 (T2) or 0.05% B. subtilis commercial product (T3) for 6 weeks, respectively. There were no differences in feed intake, egg weight, egg production and egg mass among the groups. The dietary supplementation of B. subtilis improved eggshell strength and Haugh units compared to those of control (P<0.05). The activities of GOT and GPT in serum were not also affected by the dietary treatments. The population of total microbes and lactic acid bacteria in cecum were significantly increased by the dietary B. subtilis (P<0.05), but not the coliforms. The cholesterol concentration in egg yolk and serum in the treated groups were significantly decreased compared to those of control (P<0.05). Also, The levels of phospholipids in serum were significantly decreased compared to those of control (P<0.05). The supplementation of three strains of B. subtilis to diets significantly increased the contents of tibia ash compared to that of control (P<0.05). Thus, this study showed significant improvements in egg quality, such as eggshell strength and Haugh unit, by dietary B. subtilis strains. The B. subtilis strains added to the diets modulated the profiles of cecal microflora, reflecting beneficial effects in laying hens.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.200-211
• /
• 2022

The celadon stools with an openwork ring design which consist of four items as one collection were excavated from Gaeseong, Gyeonggi-do Province. The celadon stools were designated and managed as treasures due to their high arthistorical value in the form of demonstrating the excellence of celadon manufacturing techniques and the fanciful lifestyles during the Goryeo Dynasty. However, one of the items, which appeared to have been repaired and restored in the past, suffered a decline in aesthetic value due to the aging of the treatment materials and the lack of skill on the part of the conservator, raising the need for re-treatment as a result of structural instability. An examination of the conservation condition prior to conservation treatment found structural vulnerabilities because physical damage had been artificially inflicted throughout the area that was rendered defective at the time of manufacturing. The bonded surfaces for the cracked areas and detached fragments did not fit, and these areas and fragments had deteriorated because the adhesive trickled down onto the celadon surface or secondary contaminants, such as dust, were on the adhesive surface. The study identified the position, scope, and conditions of the bonded areas at the cracks UV rays and microscopy in order to investigate the condition of repair and restoration. By conducting Fourier-transform infrared spectroscopy(FT-IR) and portable x-ray fluorescence spectroscopy on the materials used for the former conservation treatment, the study confirmed the use of cellulose resins and epoxy resins as adhesives. Furthermore, the analysis revealed the addition of gypsum(CaSO₄·2H₂O) and bone meal(Ca₁₀ (PO₄)₆(OH)₂) to the adhesive to increase the bonding strength of some of the bonded areas that sustained force. Based on the results of the investigation, the conservation treatment for the artifact would focus on completely dismantling the existing bonded areas and then consolidating vulnerable areas through bonding and restoration. After removing and dismantling the prior adhesive used, the celadon stool was separated into 6 large fragments including the top and bottom, the curved legs, and some of the ring design. After dismantling, the remaining adhesive and contaminants were chemically and physically removed, and a steam cleaner was used to clean the fractured surfaces to increase the bonding efficacy of the re-bonding. The bonding of the artifact involved applying the adhesive differently depending on the bonding area and size. The cyanoacrylate resin Loctite 401 was used on the bonding area that held the positions of the fragments, while the acrylic resin Paraloid B-72 20%(in xylene) was treated on cross sections for reversibility in the areas that provided structural stability before bonding the fragments using the epoxy resin Epo-tek 301-2. For areas that would sustain force, as in the top and bottom, kaolin was added to Epo-tek 301-2 in order to reinforce the bonding strength. For the missing parts of the ring design where a continuous pattern could be assumed, a frame was made using SN-sheets, and the ring design was then modeled and restored by connecting the damaged cross section with Wood epos. Other restoration areas that occurred during bonding were treated by being filled with Wood epos for aesthetic and structural stabilization. Restored and filled areas were color-matched to avoid the feeling of disharmony from differences of texture in case of exhibitions in the future. The investigation and treatment process involving a variety of scientific technology was systematically documented so as to be utilized as basic data for the conservation and maintenance.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.4
• /
• pp.81-97
• /
• 2019

The purpose of this study is to examine what people in Korea recognize the cultural symbolism and the planting patterns of 'Guǐmok', pagoda tree(Sophora japonica). The species planted in the 'Guǐjeong' was empirically investigated and analyzed to determine which species of pagoda tree or Zelkova tree(Zelkova serrata) was taken through literature surveys, field surveys, and interviews with persons. This 'Guǐjeong' was combined to track how the culture of the 'Guǐmok' planting introduced in China was ultimately accepted and transformed in Korea. In this study, we tried to analyze the meaning implicit in the mystery while checking the distribution of the mystery and the form of the mystery, the name of the pavilion and its relevance to the contrast medium. Essentially, the trees that govern the characterization of the nectar plant, regardless of the region, are considered to be a pagoda tree, which is considered an internal factor in which the pagoda tree culture was not completely transformed into a zelkova tree. It was recognized throughout the Joseon Dynasty that the species representing 'Prime ministers(三公)' was judged from all the Joseon Dynasty periods, based on the builder of Guǐjeong's Aho(雅號) and Dangho(堂號). It was confirmed that the tree was very likely to be planted in place of the painting tree. But now is selectively zelkova tree is in accordance with the preparation of planting site conditions and areas on behalf of the Change is very high probability that is planted. Cultural variables that led to the cultural transformation of the 'Guǐmok' seem to have been deeply involved in the geographical space of China and Korea, Confucian practices of the Choson society, comings and goings and letter bridge, and network strength with China through the book spread. In addition, the culture of 'Guǐmok' is presumed to have led to cultural custom of the upper class, not the whole class, in the Yeongnam region, it can be said that the independent adaptation to act to recognize 'Guǐmok' as a pagoda tree, that is a Sophora japonica, has occurred very strongly. The difference between the cultural areas of Yeongnam and non-Yeongnam is also considered to be an internal factor that has played a major role in the cultural transformation of planting of 'Guǐmok'.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.4
• /
• pp.332-340
• /
• 2016

Sunken ships cause damage to the environment due to the dispersal of fuel oil and harmful cargo goods in the hull. Since the sunken ship is mostly flooded by the seabed, it tends to be in a relatively stable condition. However, the heavy body, together with the load of remaining goods in the cargo hold, the constant contact with the seabed, and ocean currents and tidal waves, can affect dispersal of residual fuel oils out of the sunken ship. Corrosion of the sunken ship starts upon sinking, decreasing the thickness of the hull structure and sub-materials. Therefore, it is necessary to assess the structural stability against the potential breakdown of the sunken ship. Whilst evaluating the danger of the sunken ship, this result should be reflected in 'the possible discharge'. This study was undertaken to suggest a procedure for a step by step evaluation to assess the structural stability a sunken ship. The structural stability assessment to estimate the collapsibility of the hull was structure targeted at the sunken ship 'No. 7 HaeSung', which was classified as the prime example for the intensive management of sunken ships. This study was undertaken to suggest a procedure for a step by step evaluation to assess the structural stability a sunken ship and to propose a method to conduct a structural safety assessment that estimates the collapsibility of the hull by targeting the sunken ship 'No. 7 HaeSung',which was classified as the prime example for the intensive management of sunken ships. The collapsibility of the hull structure was estimated Based on the damage size of the hull structure, and the corrosion rate of the hull structure and sub-materials due to the seawater after sinking. It was confirmed that there was a low possibility of the total destruction of the hull structure at the current time. However, there is a high possibility in the potential failure of the hull structure due to increased rate of corrosion thereafter. Therefore, we believe continuous study on influence of corrosion and marine environment change to sunken ship's structural safety is necessary.

• Clinics in Shoulder and Elbow
• /
• v.10 no.1
• /
• pp.92-98
• /
• 2007

Introduction: The treatment of proximal humeral fracture is traditionally determined by Neer's classification system. The severely displaced three-part or four-part fracture is an indication for primary hemiarthroplasty. The current authors report the clinical results of 10 patients who received hemiarthroplasty for proximal comminuted fractures. The minimum follow-up period was 12 months. Materials and Methods: The current authors studied 10 patients who, between July 1999 and March 2005, each received hemiarthroplasty for a proximal humeral fracture of one shoulder. According to Neer's classification system, 5 of the patients had three-part fractures, and 5 of the patients had 4-part fractures. The mean interval between trauma and hemiarthroplasty was 6.1 days. The mean age of the 6 female and 4 male patients was 67.4 years(range: 56 to 76). Shoulder function was evaluated using the Constant score, the Simple Shoulder Test, and the modified UCLA score. Results: The mean Constant score was 51.4(range: 34 to 60). The mean modified SST score was 7.8 out of 12 tasks. Excluding the one patient who had also sustained an axillary artery rupture and a brachial plexus injury after the initial trauma, the mean Constant score for the remaining 9 patients was 53.5(range: 44 to 60), and the mean SST score was 7.2 tasks. The modified UCLA score averages for pain, function, and active forward flexion and strength were, respectively, 8.2($6{\sim}10$), 6.6($2{\sim}8$), and 6.9($4{\sim}8$). The total UCLA score was an average of 21.7($12{\sim}26$). Patients' the modified UCLA ratings were as follows: Excellent: 3, Good: 6, and Poor: 1. The patient with the poor outcome was the one who had also sustained the neurovascular injury. Patient's subjective satisfaction rating were as follows: Excellent: 2, Good: 7, and Poor: 1. Conclusion: Based on short term follow-up results, this study indicates that hemiarthroplasty is the treatment of choice for proximal humeral fractures on which it would be difficult to perform open reduction and internal fixation. Hemiarthroplasty is a useful treatment modality to prevent shoulder stiffness and to allow daily living tasks in elderly patients. However, restoration of muscle power and range of joint motion were not recovered satisfactorily.

• Journal of the Korean earth science society
• /
• v.39 no.3
• /
• pp.250-259
• /
• 2018

We investigated the petrological features of the stone materials used in the Jeolla Usuyeong rampart and estimated their provenance through the geological survey. The Jeolla Usuyeong was designated as a historic site (No. 535) on 2016. Since the remaining rampart is less than 15%, it is necessary to make conservation on it. In this study, we discriminated the stone materials used for the rampart according to their petrographic characteristics and estimated the volume proportion of each stone by the rock type. Also, we measured the whole-rock magnetic susceptibility. The petrographic features of the stones in the rampart were compared with those in the vicinity by their mineral composition and texture. The stone materials of the rampart mainly consist of the tuff, lapilli tuff, and lapilli stone. Among these three kinds of rocks, lapilli tuff is quantitatively the most abundant (60.3%), the next is tuff (34.7%), and lapilli stone (2.5%) shows the least amount. The whole-rock magnetic susceptibility of the tuffaceous rocks can be divided by the value of $1.0{\times}10^{-3}$ SI unit. Also, the compressive strength of tuff exhibits about 156 MPa, which is adequate to reuse for the repairing work. Petrological comparisons between stone materials and outcrop rocks distributed around the Hwawon peninsula leads to a conclusion that the stone materials of the rampart are likely to have been delivered from the Dongoeri and Sindeok-ri. Judging from the results of the comparison on the frequency of use and physical properties among the tuffaceous rocks, tuff is considered to suitable for restoring the rampart.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.161-174
• /
• 2011

The purpose of this study was to evaluate the effect of ethanol addition on efficacy of two-step total-etch adhesive under over-wet condition by measurement of remaining volatile part (RVP), microtensile bond strength (${\mu}TBS$), and degree of conversion (DC). Two-step total-etch adhesive, Optibond Solo Plus (Kerr, Orange, USA), was used. Experimental groups were divided into 8 groups: Group 1 (only 10 ${\mu}l$ adhesive), Group 2 (mixture of 3 ${\mu}l$ distilled water and 10 ${\mu}l$ adhesive), From Group 3 to Group 8 (mixture of 3 ${\mu}l$ distilled water, 10 ${\mu}l$ adhesive, and ethanol added in 1 ${\mu}l$ increment from 1 ${\mu}l$ to 6 ${\mu}l$). The mixtures were placed on slide glass and evaporated for 10 s, 30 s, and 60 s by air-drying. The weight of RVP was measured by precision weight. Same procedures were performed for ${\mu}TBS$ test and measurement of DC. The condition of mixed solution was observed under light microscope. For RVP weight, the weights of experimental groups except for group 1 decreased with the increase of air-drying time (p<0.05). The DC increased with the increase of air-drying time in only group 5 and 6 (p<0.05). The ${\mu}TBS$ increased with the increase of air-drying time in group only 5, 6, and 7 (p<0.05). The phase separation was examined and water blisters were diminished with the increase of air-drying time in group 5, 6, 7, and 8. Within the limits of this study, ethanol additionally applied to adhesive decreased RVP and increased DC and ${\mu}TBS$ under over-wet condition. It was shown that the addition of ethanol to two-step total-etch adhesive under over-wet condition would remove water and increase the efficacy of adhesive.