• Interaction and multiscale mechanics
• /
• v.2 no.2
• /
• pp.177-187
• /
• 2009

Machine or structural members subjected to fatigue loading will have a crack initiated during early part of their life. Therefore analysis of members with cracks and other discontinuities is very important. Finite element method has enjoyed widespread use in engineering, but it is not convenient for crack problems as the region very close to crack tip is to be discretized with very fine mesh. However, as the body force method (BFM), requires only the boundary of the discontinuity (crack or hole) to be discretized it is easy versatile technique to analyze such problems. In the present work fundamental solution for concentrated load x + iy acting in the semi-infinite plate at an arbitrary point $z_0=x_0+iy_0$ is considered. These fundamental solutions are in complex form ${\phi}(z)$ and ${\psi}(z)$ (England 1971). These potentials are known as Melan potentials (Ramakrishna 1994). A crack in the semi-infinite plate as shown in Fig. 1 is considered. This crack is divided into number of divisions. By applying pair of body forces on a division, the resultant forces on the remaining 'N'divisions are to be found for which ${\phi}_1(z)$ and ${\psi}_1(z)$ are derived. Body force method is applied to calculate stress intensity factor for crack in semi-infinite plate. Also for the case of crack emanating from circular hole in semi-infinite plate radial stress, hoop stress and shear stress are calculated around the hole and crack. Convergent results are obtained by body force method. These results are compared with FEM results.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.1
• /
• pp.7-11
• /
• 2006

Since ceramic layers coated on machinery components inevitably experience the changes in their properties it is necessary to evaluate the characteristics of ceramic coating layers nondestructively for a reliable use of coated components and 4heir remaining life prediction. To address such a need, in the present study, an ultrasonic backward radiation technique is applied to investigate the characteristics of leaky Rayleigh surface waves propagating through the very thin TiN ceramic layers coated on AISI 1045 steel or austenitic 304 steel substrate with three different conditions of surface roughness, coating layer thickness and wear condition. In the experiments performed in the present work, the peak angle and the peak amplitude of ultrasonic backward radiation profile varied sensitively according to three specimen preparation renditions. in fact, this result demonstrates a high possibility of the ultrasonic backward radiation as an effective tool for the nondestructive characterization of the resting layers even in such a thin regime.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.3
• /
• pp.192-198
• /
• 2021

The battery's State of Health (SOH) is a critical parameter in the process of battery use, as it represents the Remaining Useful Life (RUL) of the battery. Electrochemical Impedance Spectroscopy (EIS) is a widely used technique in observing the state of the battery. The measured impedance at certain frequencies can be used to evaluate the state of the battery, as it is intimately tied to the underlying chemical reactions. In this work, a low-cost portable EIS instrument is developed on the basis of the ARM Cortex-M4 Microcontroller Unit (MCU) for measuring the impedance spectrum of Li-ion battery packs. The MCU uses a built-in DAC module to generate the sinusoidal sweep perturbation signal. Moreover, it performs the dual-channel acquisition of voltage and current signals, calculates impedance using a Digital Lock-in Amplifier (DLA), and transmits the result to a PC. By using LabVIEW, an interface was developed with the real-time display of the EIS information. The developed instrument was suitable for measuring the impedance spectrum of the battery pack up to 1000 V. The measurement frequency range of the instrument was from 1 hz to 1 Khz. Then, to prove the performance of the developed system, the impedance of a Samsung SM3 battery pack and a Bexel pouch module were measured and compared with those obtained by the commercial instrument.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.16 no.2
• /
• pp.1-9
• /
• 2020

Large-scale industrial facility structures continue to deteriorate due to the effects of operating and environmental conditions. The problems of these industrial facilities are potentially causing economic losses, environmental pollution, casualties, and national losses. Accordingly, in order to prevent disaster accidents of large structures in advance, the necessity of diagnosing structures using non-destructive inspection techniques is being highlighted. The defect occurrence, location and defect type of the structure are important parameters for predicting the remaining life of the structure, so continuous defect observation is very important. Recently, many researchers have been actively researching real-time monitoring technology to solve these problems. Structure Health Monitoring Inspection is a technology that can identify and respond to the occurrence of defects in real time, but there is a limit to check the degree of defects and the direction of growth of defects. In order to compensate for the shortcomings of these technologies, the importance of defect imaging techniques is emerging, and in order to find defects in large structures, a method of inspecting a wide range using guided ultrasonic is effective. The work presented here introduces a calculation for the shape factor for evaluation of the damaged area, as well as a variable β parameter technique to correct a damaged shape. Also, we perform research in modeling simulation and an experiment for comparison with a suggested inspection method and verify its validity. The curved structure image obtained by the advanced RAPID algorithm showed a good match between the defect area and the shape.

• Journal of Life Science
• /
• v.16 no.6
• /
• pp.1036-1043
• /
• 2006

The transformation-associated recombination (TAR) cloning technique allows selective isolation of chromosome regions or genes from complex genome. The procedure requires knowledge of relatively small genomic sequences that reside adjacent to the chromosome region of interest. This method involves homologous recombination during spheroplast transformation between genomic DNA and a TAR vector that has 5' and 3' gene targeting sequences (hooks). To examine whether TAR cloning can be applied to the isolation of gene homologues, we chose the HPRT genes from human and mouse genome. As results, the yield of positive clones for HPRT gene from human and mouse genome when using a TAR vector containing mHPRT hook or hHPRT hook was almost same level. Analysis of the gap regions in mHPRT revealed that they contain abnormalities that could result in instability of the sequences. In conclusion, we were able to use the TAR cloning technology to isolate gene homologue (orthologue) from nonidentical genome. Moreover, the use of the TAR cloning system may accelerate work on closing the remaining gaps in mammalian genome to achieve the goal of annotation of all mammalian genes.

• Journal of dental hygiene science
• /
• v.9 no.4
• /
• pp.419-426
• /
• 2009

The occurrence of toothache signals the malfunction in oral health, which allows the detection of any abnormal condition in the oral cavity at an early stage to prevent the condition from worsening, and thus can act as a preventive measure. This study has looked into the status of oral health management in relation to toothache through the structured survey administered to 235 college students. Based on the survey results, this study aimed at comparing the toothache occurrence prediction between regression analysis and CART model in order to clarify the relationship between the factors of oral health management habits that contribute to toothache occurrence. According to the result, there was a difference between the present health status and the health status of the past year depending on the presence or non-presence of toothache occurrence (p<0.05). There was a difference in the regularity of meal time depending on the presence non-presence of toothache occurrence from the dietary habits of the research subjects (p<0.05). As for the presence or non-presence of toothache occurrence from the oral hygiene habits of the research subject, there was a difference between the occurrence and nonoccurrence of bleeding during brushing or flossing (p<0.05). According to the results of regression analysis, no factors were signifiant in the relationship with the presence or non-presence of toothache occurrence from the status of life habits and oral hygiene habits. 70% of the researched group was randomly selected as the sample for generating an analytical model and the remaining 30% was used as the sample for generating an evaluation model. According to the results of CART model, the occurrence of toothache was higher in the case of irregular meal time and poor current health condition than the case of average or satisfactory health condition. The above results imply that CART model is very useful technique in predicting toothache occurrence compared to regression analysis, and suggests that CART model could be very useful in predicting other oral diseases including toothache.

• FLOWER RESEARCH JOURNAL
• /
• v.26 no.4
• /
• pp.195-201
• /
• 2018

The plant morphological and chromosome characteristics of 'Bonanza', 'Coral Candy' and 'Purple Crystal', a formolongi-Asiatic (FA) interspecific hybrid species bred at the National Institute of Horticultural Science, Rural Development Administration (RDA), were investigated in this study. The flowering time of these species were found to have some variation. 'Bonanza' flowers in the middle to late June (medium-late maturing cultivar), 'Coral Candy' in the mid of June (medium maturing cultivar), and 'Purple Crystal' was observed to be in early June (early maturing cultivar). The flowering direction of all three cultivars are upward facing flowers and having a weak fragrance. The height of the plants was recorded in the range between 101.0 cm ('Purple Crystal') to 142.3 cm ('Bonanza'), thus they are able to develop cut flowers with excellent stem elongation. Flower diameters of 'Bonanza' (17.1 cm) and 'Coral Candy' (16.9 cm) were classified to be large sized flowers. On the other hand, 'Purple Crystal' had a narrow flower diameter (12.3 cm) with an outer petal width of more than 4.0 cm. Leaf length was observed for 'Bonanza' (15.7 cm), 'Coral Candy' (19.7 cm), and 'Purple Crystal' (11.1 cm). Chromosome analysis was done using FISH technique. Results revealed that all three cultivars were observed as triploids (2n=3x=36). FISH analysis also showed 5S/45S rDNA of 'Bonanza', 'Coral Candy' and 'Purple Crystal' as 4/11 loci, 4/12 loci, and 4/11 loci, respectively. The results of the FISH analysis are useful as markers to distinguish cultivars, since the patterns of rDNA observed on the remaining chromosomes are significantly different except FISH patterns of chromosome #3.