• 드라이브 ㆍ 컨트롤
• /
• 제12권4호
• /
• pp.54-59
• /
• 2015

Due to the tendency to use high speed pneumatic cylinders to improve productivity, cushioning devices are adopted to decelerate the piston motion of pneumatic cylinders to reduce noise, vibration, and impact. This paper presents a comparison of the cushion characteristics of a high speed pneumatic cylinder with a relief valve type cushioning device. The system parameters selected are the damping coefficient, Coulomb friction, heat transfer coefficient, and cracking pressure of the relief valve in the air cushioning device. The integral of the time multiplied square error (ITSE) is used to quantitative measure the cushioning performance to assess the effect of varying these. The cushioning performance achieved good results when the ITSE is a minimum value. In a comparison of the piston displacement and velocity with the variations in system parameters, the heat transfer coefficients are not as significantly affected as the other. Also, the cracking pressure of the relief valve is mainly affected by the pressure and temperature in the cushion chamber.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권5호
• /
• pp.696-704
• /
• 2009

In this paper, the flow characteristics through an industrial safety relief valve used to protect the crankcase room in a large-sized marine engine have been numerically investigated using the moving-mesh strategy. With the room pressure higher than the cracking one, the spring-loaded disc becomes open and then the air in the room blows off into the atmosphere, resulting in the reduction of the room pressure and then the shutoff of the disc. Numerical simulations are performed on the compressible air flow through the relief valve (${\phi}160mm$) with the initial room pressure (0.11 bar or 0.12bar) higher than the cracking one (0.1 bar). The numerical method has been validated by comparing the results with the empirical ones. Results show that the disc motion and flow characteristics can be successfully simulated using the moving-mesh strategy and depend strongly on the spring stiffness and the flow passage shape. With increasing spring stiffness, the maximum disc displacement decreases and thus the total disc-opening time also decreases. In addition, the flow passage shape makes a significant effect on the velocity and direction of the flow.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권3호
• /
• pp.394-406
• /
• 2015

In this work, an efficient aircraft landing simulation strategy is proposed to develop an efficient and reliable hard-landing monitoring procedure. Landing stage is the most dangerous moment during operation cycle of aircraft and it may cause structural damage when hard-landing occurs. Therefore, the occurrence of hard-landing should be reported accurately to guarantee the structural integrity of aircraft. In order to accurately determine whether hard-landing occurs or not from given landing conditions, full nonlinear structural dynamic simulation can be performed, but this approach is highly time-consuming. Thus, a more efficient approach for aircraft landing simulation which uses a hierarchical aircraft landing model and an extended inertia relief technique is proposed. The proposed aircraft landing model is composed of a multi-body dynamics model equipped with landing gear and tire models to extract the impact force and inertia force at touch-down and a linear dynamic structural model with an extended inertia relief method to analyze the structural response subject to the prescribed rigid body motion and the forces extracted from the multi-body dynamics model. The numerical examples show the efficiency and practical advantages of the proposed landing model as an essential component of aircraft hard-landing monitoring procedure.

• The Korean Journal of Pain
• /
• 제11권1호
• /
• pp.91-95
• /
• 1998

Background: Quality of postoperative care may be improved by management of postoperative pain. Epidural anesthesia and analgesia have several advantages over general anesthesia and parenteral analgesics in managing the postoperative pain. We retrospectively reviewed records of obstetrical patients who underwent the cesarean sections under epidural anesthesia to evaluate perioperative analgesic use, side effects, and complications. Methods: All patients received epidural anesthesia consisting of 0.25% bupivacaine, 2% lidocaine and 100 ${\mu}g$ fentanyl, followed by epidural analgesia with 0.1% bupivacaine and 12.5 ${\mu}g$/ml fentanyl at rate of 2 ml/hr for 48 hours. Patients' records were reviewed for: medications administered for pain relief, incidence of nausea and vomiting and pruritus, and presence of respiratory or cardiovascular depression. Results: Over 18 months, 1,054 patients' records were reviewed. Average age was 27.8 years (18~43 years). 768 patients (72.9%) received no additional drugs for the pain relief. Intramuscular analgesics, ketoprofens, were one time administered to 247 patients (23.4%), 39 patients (3.7%) received two more dosages. The time of administration was $8.3{\pm}4.3$ hours postoperatively. Antiemetics, for example, low-dose droperidol, were administerd one time for 160 patients (15.2%), 5 patients (0.5%) received two or more administrations. The medication was administered $5.1{\pm}4.2$ hours postoperatively. Drugs for relief of pruritus, low-dose naloxone, were administered one time for 108 patients (10.2%), 10 patients (0.9%) received 2 or more dosages. The time of administration was $6.3{\pm}4.2$ hours postoperatively. None of the patients experienced cardiovascular nor respiratory (<8 breath/min) depression. Conclusions: Postoperative continuous epidural analgesia in combination with bupivacaine and fentanyl is an effective method of providing postoperative analgesia with low incidence of side effects.

• 한국시뮬레이션학회논문지
• /
• 제13권2호
• /
• pp.13-21
• /
• 2004

The thermal-hydraulic model ARTS which was based on the RETRAN-3D code adopted in the domestic full-scope power plant simulator which was provided in 1998 by KEPRI. Since ARTS is a generalized code to model the components with control volumes, the smaller time-step size should be used even if converged solution could not get in a single volume. Therefore, dedicated models which do not force to reduce the time-step size are sometimes more suitable in terms of a real-time calculation and robustness. In the case of PRT(Pressurizer Relief Tank) model, it is consist of subcooled water in bottom and non-condensable gas in top. The sparger merged under subcooled water enhances condensation. The complicated thermal-hydraulic phenomena such as condensation, phase separation with existence of non-condensable gas makes difficult to simulate. Therefore, the PRT volume can limit the time-step size if we model it with a general control volume. To prevent the time-step size reduction due to convergence failure for simulating this component, we developed a dedicated model for PRT. The dedicated model was expected to provide substantially more accurate predictions in the analysis of the system transients. The results were resonable in terms of accuracy, real-time simulation, robustness and education of operators, complying with the ANSI/ANS-3.5-1998 simulator software performance criteria and RETRAN-3D results.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제40권4호
• /
• pp.155-159
• /
• 2014

Objectives: The purpose of this article is to evaluate factors influencing prognosis of arthrocentesis in patients with temporomandibular joint (TMJ) disorder. Materials and Methods: The subjects included 145 patients treated with arthrocentesis at the Dental Center of Ajou University Hospital from 2011 to 2013 for the purpose of recovering mouth opening limitation (MOL) and pain relief. Prognosis of arthrocentesis was evaluated 1 month after the operation. Improvement on MOL was defined as an increase from below 30 mm (MOL ${\leq}30mm$) to above 40 mm (MOL ${\geq}40mm$), and pain relief was defined as when a group with TMJ pain with a visual analog scale (VAS) score of 4 or more (VAS ${\geq}4$) decreased to a score of 3 or more. The success of arthrocentesis was determined when either mouth opening improved or pain relief was fulfilled. To determine the factors influencing the success of arthrocentesis, the patients were classified by age, gender, diagnosis group (the anterior disc displacement without reduction group, the anterior disc displacement with reduction group, or other TMJ disorders group), time of onset and oral habits (clenching, bruxism) to investigate the correlations between these factors and prognosis. Results: One hundred twenty out of 145 patients who underwent arthrocentesis (83.4%) were found to be successful. Among the influencing factors mentioned above, age, diagnosis and time of onset had no statistically significant correlation with the success of arthrocentesis. However, a group of patients in their fifties showed a lower success rate (ANOVA P=0.053) and the success rate of the group with oral habits was 71% (Pearson's chi-square test P=0.035). Conclusion: From this study, we find that factors influencing the success of arthrocentesis include age and oral habits. We also conclude that arthrocentesis is effective in treating mouth opening symptoms and for pain relief.

• 한국식품조리과학회지
• /
• 제24권1호
• /
• pp.59-67
• /
• 2008

In an effort to make a functional and stable yogurt, this study investigated the improvement effects of sea tangle extract and sea tangle yogurt on intestinal function. The intestinal improvement effect of the extract was measured by the charcoal meal transit method, employing Balb/C mice. And constipation relief was compared utilizing the loperamide-induced constipation method, employing SD rats. Charcoal meal transit was remarkably increased in the mice receiving sea tangle extract as compared to the controls. The constipation relief effects of the sea tangle and sea tangle yogurt were evaluated by measuring fecal amounts in the rats after adding them to water. The fecal contents increased remarkably in the sea tangle administered rat groups as compared to the control group. In addition, different yogurt samples were used to evaluate the characteristics of the sea tangle yogurt. During storage, pH slightly decreased in the yogurt with sea tangle as well as without. At the same time, acidity slowly increased as the storage duration increased. As time elapsed, the amounts of viable cells increased in both yogurts (with and without sea tangle). In the sensory evaluation, significant differences were shown between the sea tangle yogurt and the control for color, flavor, sweetness, and overall quality. Overall, based on the combined results of the intestinal function effects and sensory evaluation, the 0.25% sea tangle yogurt proved to be superior.

• Journal of Korean Neurosurgical Society
• /
• 제48권3호
• /
• pp.240-243
• /
• 2010

Objective : Radiofrequency (RF) medial branch neurotomy is an effective management of lumbar facet syndrome. However, pain may recur after period of time. When pain recurs, it can be repeated, but the successful outcome and duration of relief from repeated procedures are not clearly known. The objective of this study was to determine the success rate and duration of pain relief from repeated radiofrequency medial branch neurotomy for lumbar facet syndrome. Methods : A retrospective review of medical records was done on 60 consecutive patients, from March of 2006 to February of 2009, who had an initial successful RF neurotomy but subsequently underwent repeated procedures due to recurrence of pain. All procedures were done in carefully selected patients after at least two responsive medial branch nerve blocks. C-arm fluoroscopic guide, impedance, sensory and motor threshold monitoring tools were used for the precise placement of electrodes. Responses of repeated procedures were compared with initial radiofrequency neurotomy for success rates and duration of pain relief. Results : There were 48 females and 12 males. Mean age was 52.4 years (range, 26-83). RF medial branch neurotomy was done on one side in 38 and both sides in 22 patients, each covering at least three segments. Average visual analog scale at last procedure was 6.8. Twelve patients had previous lumbar operations, including 4 patients with instrumentations. Fifty-five patients had two procedures and five patients had three procedures. Mean duration of successful pain relief (> 50% of previous pain for at least 3 months period) after initial radiofrequency neurotomy was 10.9 months (range, 3-28) in 51 (85%) patients. From repeated procedures, successful pain relief was seen in 50 (91%) patients with average duration of 10.2 months (range, 3-24). Five patients had third procedure, which was successful in 4 (80%) patients with mean duration of 9.8 months (range, 5-16). This was not statistically different from initial results. There were no permanent neurological complications from the procedures. Conclusion : Results of this study indicate that the frequency of success and durations of relief from repeated RF medial branch neurotomy for lumbar facet syndrome are similar to initial results that provided relatively prolonged period of pain relief without major side effects Each procedure seems to provide successful pain relief for about 10 months in more than 85% of carefully selected patients when properly done.

• 여성건강간호학회지
• /
• 제9권2호
• /
• pp.161-169
• /
• 2003

The purpose of this study was to identify menstrual symptoms, coping and Relief of Symptoms used by female college students. A convenience sample of 202 students were obtained from two colleges in Seoul. Data were collected through questionnaires from September 10 to December 18, 2001, Three instruments were used in this study, the Menstrual Symptoms Questionnaire by Park K. R(1988) and Menstrual Coping Questionnaire and Relief of Symptoms by Billings & Moos(1981) modified for this study. 1)Part time instructor, Department of Nursing, Pochon CHA University The data were analyzed by descriptive statistics, t-test, ANOVA with the SPSS 10.0 program. The result of this study are as follows. 1. Prevalence rate of dysmenorrhea was 91.6%. 2. The total mean score for menstrual symptoms was 1.89 of a possible total of 5 and mean score for each category was, 2.26 for water retention, 2.11 for negative affect, 2.02 for pain, 1.83 behavioral change, 1.69 for autonomic reactions, and 1.53 for concentration. 3. According to the result of this study, statistical differences were found for age (F=3.76, p=0.01), menstrual fear (t=2.02, p=0.04), dysmenorrhea (t=7.73, p=0.02), and taking medication (t=5.95, p=0.00). 4. The coping mode with the highest scores were 'rest and go to bed (83.7%)', 'regard mensturation as a physiological and temporary phenomenon (68.3%)', 'take a warm shower(66.8%)'. The most frequently used methods to relief of symptoms were 'take pain killers (99.9%)', 'to apply hot water bag on painful parts of the body (96.6%)' and 'rest and go to bed (88.8%)'.

• 산업경영시스템학회지
• /
• 제44권1호
• /
• pp.26-36
• /
• 2021

The topic of this study is the field of humanitarian logistics for disaster response. Many existing studies have revealed that compliance with the golden time in response to a disaster determines the success or failure of relief activities, and logistics costs account for 80% of the disaster response cost. Besides, the agility, responsiveness, and effectiveness of the humanitarian logistics system are emphasized in consideration of the disaster situation's characteristics, such as the urgency of life-saving and rapid environmental changes. In other words, they emphasize the importance of logistics activities in disaster response, which includes the effective and efficient distribution of relief supplies. This study proposes a mathematical model for establishing a transport plan to distribute relief supplies in a disaster situation. To determine vehicles' route and the amount of relief for cities suffering a disaster, it mainly considers the urgency, effectiveness (restoration rate), and uncertainty in the logistics system. The model is initially developed as a mixed-integer nonlinear programming (MINLP) model containing some nonlinear functions and transform into a Mixed-integer linear programming (MILP) model using a logarithmic transformation and piecewise linear approximation method. Furthermore, a minimax problem is suggested to search for breakpoints and slopes to define a piecewise linear function that minimizes the linear approximation error. A numerical experiment is performed to verify the MILP model, and linear approximation error is also analyzed in the experiment.