• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.892-897
• /
• 2000

In this study, tap wear was analyzed not only to predict the tap life time but also to propose an improved tap design. Because rake angle and thread relief of tap are the significant factors in geometry of tap, these two factors were picked as the experiment variables. The experiment was conducted with six types of tap which have 6$^{\circ}$ , 8$^{\circ}$ and 12$^{\circ}$ of rake angles with 0,08mm and 0.14 mm of thread relief. From the measured cutting force, it could be known that cutting torque was low at the large the rake thread relief and tool life was long as rake angle became large. Eventually, tool life is longest when rake angle is 12$^{\circ}$ and the with 0.08mm thread relief. Aand the width of crater wear and that of flank wear were measured when a tapping torque was 20 [$kg_f$-mm] . Most of the measured values were above the width of tool wear[$V_B$=O.O3m], which means that tool life is over.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.114-118
• /
• 1996

Evaluation of cutting condition is one of the most important aspect to improve productivity and quality. In this study, the wear and cutting characteristics(cutting force, acoustic emission signal and surface roughness) of ceramic cutting tool for hardened die material(SKD11) were investigated by experiment. Flank wear on relief face of tool was occurred more dominant than crater wear on rake face. Experiments were performed under the various cutting condition.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.357-362
• /
• 2003

Recently, the demand for advanced technology of high precision and high efficiency processing of hard materials such as inconel is increasing with progress of industrial goods. However, the machinability of inconel is very inferior to the other conventional industrial materials and the machining technology for inconel involves many problems to be solved in machining accuracy, machining efficiency, etc. Therefore it is needs to establish the machining technology. The purpose of this study is to develop an advanced ultrasonic vibration machining technology for inconel, using the 60KHz and 75KHz high frequency, amplitude about 8${\mu}{\textrm}{m}$ and 4${\mu}{\textrm}{m}$, respectively. As the result, this new ultrasonic vibration machining is reasonable and suitable for the high efficient. accuracy machining method of inconel.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.3
• /
• pp.365-371
• /
• 2000

Objectives : To describe a technique for percutaneous vertebroplasty of osteoporotic vertebral body compression fractures and to report preliminary results of its use. Methods : The technique was used over a 8-month period in 9 patients with 10 painful vertebral fractures. The technique involves percutaneous puncture of the involved vertebrae with a Jamshidi needle via a transpedicular approach followed by injection of polymethylmethacrylate(PMMA) into the vertebral body. Results : The procedure was technically successful in all patients, with an average injection amount of 5.9 cc per vertebral body. One patient complained of flank pain postoperatively in spite of improvement in back pain caused by the fractured vertebra. Remaining eight patients reported significant pain relief early after treatment. The patients were followed up for 3 to 15 months(average 7.2 months) and demonstrated no recurrence of pain or aggravation of deformity. Conclusion : Vertebroplasty appears to be a valuable tool in the treatment of painful osteoporotic vertebral fractures, providing acute pain relief and early mobilization in appropriate patients. However, it needs to have more extensive prospective clinical study to confirm its definitive role in the management of this condition.

• Journal of Korean Traditional Oncology
• /
• v.14 no.1
• /
• pp.53-59
• /
• 2009

Background & Objective: Regardless of types of cancer, cancer pain means the pain occurred by tumor itself, caused by complication or side effects during treatment and which is neither directly related to tumor nor treatment. This case was performed to relieve the cancer pain and study the effect of moxibustion to the cancer pain. Method: For 27 days, the patient was treated by moxibustion($MANINA^{(R)}$), acupuncture, herbal medicine and narcotic analgesics. We planned to maintain moxibustion on 8 points of Bladder meridian line(BL13, BL17, BL42, BL43) for 20 minutes. The improvement of the symptom was evaluated by BPI/VAS, and the amount of narcotic analgesics applied. Results: The BPI/VAS was declined and amount of applying narcotic analgesics was decreased. Conclusion: It is suggested that moxibustion on BL13, BL17, BL42, BL43 is useful to relief of cancer pain in left flank area.

• Journal of Chest Surgery
• /
• v.29 no.2
• /
• pp.244-247
• /
• 1996

Multiple symmetric lipomatosis is a rare disease characterized by progressive growth of subcutaneous fat masses which are located symmetrically at neck, shoulders, chest, abdomen and groin. Recent surveys revealed a high incidence of combined somatic and autonomic neuropathy. The exact cause of the disease is not known. We have experienced one case of multiple symmetric lipomatosis with mediastinal involvement with symptomatic compression of trachea. The patient was a 55-year-male, complaining of dyspnea and slowly enlarging multiple symmetric masses at the neck, shoulders, chest, abdomen, flank and groin over a period of 10 years. He had a habit of excessive alcohol intake for many years. The fatty masses in the neck and the upper mediastinum including peritracheal region were excised through transverse cervical incision. But, because of the incomplete excision of peritracheal fatty tissue, we performed reoperation for the relief of residual tracheal compression at the 15th postoperative day. Two days later emergent tracheostomy was performed due to postoperative pneumomediastinum and subcutaneous emphysema. He could discharge with permanant tracheostomy.