• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제5권1호
• /
• pp.1-6
• /
• 2016

도메인 분석은 신뢰성 있는 프로젝트 개발의 중요한 요소가 된다. 도메인 분석에서 발생되는 오류는 전체 시스템에 영향을 주게 되고, 그 결과 고객의 만족도가 낮아진다. 따라서 요구사항 단계에서 신뢰성 있는 분석을 위하여 도메인의 특성을 분석할 수 있는 방법이 필요하게 된다. 본 논문에서는 이와 같은 문제를 해결하기 위하여 도메인 분석의 신뢰성 향상을 위한 도메인 분류와 복잡도 측정방법을 제시하고자 한다.

• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.223-229
• /
• 2013

Restructuring and recent developments in the power system and problems arising from construction and maintenance of large power plants, increasing amount of interest in distributed generation (DG) source. Distributed generation units due to specifications, technology and location network connectivity can improve system and load point reliability indices. In this paper, the allocation and sizing of DG in distribution networks are determined using optimization. The objective function of the proposed method is to improve customer-based reliability indices at lowest cost. The placement and size of DGs are optimized using a Genetic Algorithm (GA). To evaluate the proposed algorithm, 34-bus IEEE test system, is used. The results illustrate efficiency of the proposed method.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제8권1호
• /
• pp.39-59
• /
• 2008

The performance of weapon system, based on the acceleration of advanced scientific technology, has been reinforced to the state of precision, complexion and multi-function. People have given great interest for a long time on its development, acquisition cost and enormous expense of operation/support. Under this environmental situation, this research paper proposes two kinds of implementation that can improve the RAM(Reliability, Availability, Maintainability) on weapon system. The first section is to understand all of the actual states on its reliability, in the acquisition process and to make the improvement for RAM at the milestones on the acquisition steps. The next section is to establish a defense RAM center, which will be closely cooperated with acquisition organization such as Ministry of Defense, DAPA(Defense Acquisition Program Administration), DTaQ(Defense agency for Technology and Quality) and ADD(Agency for Defense Development), etc. and to conclusively improve the RAM of weapon system in South Korea.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2000년도 춘계학술대회 발표논문집
• /
• pp.223-230
• /
• 2000

This work aims to develop modeling methodology of machine part reliability. The reliability model is to be used for predicting and improving reliability in planning and design processes of products. In order to develop the reliability model of machine parts, the functions and interactions of sub-units of machine parts are analyzed first and function network is constructed. Using the function network, function block diagram is developed, which can be the basis for deriving reliability block diagram. Modeling of machine part reliability has not been widely studied since the reliability modeling of machine parts requires understanding of the functions and failures of their components in several viewpoints. This work tries to find general methodology of reliability modeling and proposes a framework for reliability improvement during machine part development.

• 전기학회논문지
• /
• 제62권4호
• /
• pp.467-473
• /
• 2013

The addition of disconnect switches to a distribution feeder or the replacement of the manual switches with the automatic switches do, in general, increase reliability by decreasing the duration of the outage of many to the customers on the feeder and reducing the outage section. However, the improvement of reliability in power distribution system causes an increase of the investment cost, for example, replacement costs, labor costs, and so on. For this reason - the balance between investment and reliability improvement - many studies about the appropriate level of investment have been conducted. In this paper, we suggest the algorithm for determining the reasonable switch automation rate in the power distribution system. We evaluate the customer interruption cost and reliability for several cases - these cases relate with the switch automation rate - in the domestic metropolitan power distribution system, estimate the effectiveness of changing the manual switch to automatic switch quantitatively. These results can help the determining on the disconnect switch's automation rate.

• Structural Engineering and Mechanics
• /
• 제51권6호
• /
• pp.973-988
• /
• 2014

This paper presents a factor-analysis based questionnaire categorization method to improve the reliability of the evaluation of working conditions without influencing the completeness of the questionnaire both in Taiwanese and Chinese construction enterprises for structural engineering applications. The proposed approach springs from the AI application and expert systems in structural engineering. Questions with a similar response pattern are grouped into or categorized as one factor. Questions that form a single factor usually have higher reliability than the entire questionnaire, especially in the case when the questionnaire is complex and inconsistent. By classifying questions based on the meanings of the words used in them and the responded scores, reliability could be increased. The principle for classification was that 90% of the questions in the same classified group must satisfy the proposed classification rule and consequently the lowest one was 92%. The results show that the question classification method could improve the reliability of the questionnaires for at least 0.7. Compared to the question deletion method using SPSS, 75% of the questions left were verified the same as the results obtained by applying the classification method.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.14-14
• /
• 2003

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제5권3호
• /
• pp.381-391
• /
• 2005

The level of reliability attained largely depends upon the investment in reliability growth programs during development phase. In order to find the relationship between reliability growth test time and BRTE(basic reliability tasks effectiveness) in a reliability improvement program that minimizes LCC in which contains the reliability growth cost, repair and replacement costs, and spare parts ordering costs in service with given service rate in management policy, the growth rate has been suggested proper LCC versus growth rate. This model employs the reliability growth projection with delayed fixes in avionic equipment based on AMSAA.

• 품질경영학회지
• /
• 제48권3호
• /
• pp.395-408
• /
• 2020

Purpose: This study was performed for advancement of aviation security equipments certification system. Methods: We investigated aviation security equipments certification-related registrations and the latest research trends of explosive detection technologies. Based on the literature studies, we draw the critical issues of the aviation security equipment certification system and suggested improvement direction. Results: We found some inaccuracies of the definition of explosive trace detection equipments, accreditation review committee, and performance evaluation test method. These problems should be modified to suit being practical. Conclusion: The present results would be useful for basic data for modifying aviation security equipments certification systems.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.446-452
• /
• 2002

In this paper, it is proposed that an existing utilizing methods of FMEA, one of the potential failure cause analysis of the systems and products, is reviewed and more efficient advanced application scheme and improvement idea is suggested. In present, in company with Products liability laws which are being conducted, this proposed methods are intended to be applied at systems which require high-reliability and safety.